Set the AP name with the short name plus the 4 first digits of the ESP mac (#1331)

so as to don't disclose the password used for WM.
Also change the wm password from MAc to be the last 8 digits, as these will change more than the first 8 ones.
Also make consistent the ifndef qnd the parsing between WM_PWD_FROM_MAC and USE_MAC_AS_GATEWAY_NAME

main/User_config.h

@@ -50,7 +50,7 @@
  */
 /*-------------DEFINE GATEWAY NAME BELOW IT CAN ALSO BE DEFINED IN platformio.ini----------------*/
 
-// Uncomment to use the MAC address in the format of 112233445566 as the gateway name
+// Uncomment to use the MAC address first 4 digits in the format of 5566 as the gateway name
 // Any definition of Gateway_Name will be ignored. The Gateway_Short_name _ MAC will be used as the access point name.
 //#define USE_MAC_AS_GATEWAY_NAME
 #ifndef Gateway_Name
@@ -114,11 +114,9 @@ const byte mac[] = {0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95}; //W5100 ethernet shield
 #  endif
 #endif
 
-#define WM_PWD_FROM_MAC false // enable to set the password from the 8 first digit of the ESP mac address for enhanced security, enabling this option requires to have access to the MAC address, either through a sticker or with serial monitoring
+//#define WM_PWD_FROM_MAC true // enable to set the password from the 8 first digit of the ESP mac address for enhanced security, enabling this option requires to have access to the MAC address, either through a sticker or with serial monitoring
-#if !WM_PWD_FROM_MAC
+#ifndef WifiManager_password
-#  ifndef WifiManager_password
+#  define WifiManager_password "your_password" //this is going to be the WPA2-PSK password for the initial setup access point
-#    define WifiManager_password "your_password" //this is going to be the WPA2-PSK password for the initial setup access point
-#  endif
 #endif
 #ifndef WifiManager_ssid
 #  define WifiManager_ssid Gateway_Name //this is the network name of the initial setup access point

main/main.ino

@@ -182,6 +182,10 @@ char gateway_name[parameters_size + 1] = Gateway_Name;
 char WifiManager_ssid[MAC_NAME_MAX_LEN];
 char ota_hostname[MAC_NAME_MAX_LEN];
 #endif
+#ifdef WM_PWD_FROM_MAC
+#  undef WifiManager_password;
+char WifiManager_password[9];
+#endif
 bool connectedOnce = false; //indicate if we have been connected once to MQTT
 bool connected = false; //indicate whether we are currently connected. Used to detected re-connection
 int failure_number_ntwk = 0; // number of failure connecting to network
@@ -658,14 +662,18 @@ void setup() {
   Log.notice(F("OpenMQTTGateway Version: " OMG_VERSION CR));
 #  endif
 
-#  ifdef USE_MAC_AS_GATEWAY_NAME
   String s = WiFi.macAddress();
+#  ifdef USE_MAC_AS_GATEWAY_NAME
   sprintf(gateway_name, "%.2s%.2s%.2s%.2s%.2s%.2s",
           s.c_str(), s.c_str() + 3, s.c_str() + 6, s.c_str() + 9, s.c_str() + 12, s.c_str() + 15);
-  snprintf(WifiManager_ssid, MAC_NAME_MAX_LEN, "%s_%s", Gateway_Short_Name, gateway_name);
+  snprintf(WifiManager_ssid, MAC_NAME_MAX_LEN, "%s_%.2s%.2s", Gateway_Short_Name, s.c_str(), s.c_str() + 3);
   strcpy(ota_hostname, WifiManager_ssid);
   Log.notice(F("OTA Hostname: %s.local" CR), ota_hostname);
 #  endif
+#  ifdef WM_PWD_FROM_MAC // From ESP Mac Address, last 8 digits as the password
+  sprintf(WifiManager_password, "%.2s%.2s%.2s%.2s",
+          s.c_str() + 6, s.c_str() + 9, s.c_str() + 12, s.c_str() + 15);
+#  endif
 
 #  ifdef ESP32_ETHERNET
   setup_ethernet_esp32();
@@ -1232,18 +1240,9 @@ void setup_wifimanager(bool reset_settings) {
 
   if (!wifi_reconnect_bypass()) // if we didn't connect with saved credential we start Wifimanager web portal
   {
-    // Wifi Manager password
-    String wm_password;
-#  if WM_PWD_FROM_MAC // From ESP Mac Address
-    wm_password = WiFi.macAddress();
-    wm_password.replace(":", "");
-    wm_password.substring(0, 8);
-#  else
-    wm_password = WifiManager_password; // From macro definition
-#  endif
 #  ifdef ESP32
     if (lowpowermode < 2) {
-      displayPrint("Connect your phone to WIFI AP:", WifiManager_ssid, const_cast<char*>(wm_password.c_str()));
+      displayPrint("Connect your phone to WIFI AP:", WifiManager_ssid, WifiManager_password);
     } else { // in case of low power mode we put the ESP to sleep again if we didn't get connected (typical in case the wifi is down)
 #    ifdef ZgatewayBT
       lowPowerESP32();
@@ -1253,11 +1252,11 @@ void setup_wifimanager(bool reset_settings) {
 
     ErrorIndicatorON();
     InfoIndicatorON();
-    Log.notice(F("Connect your phone to WIFI AP: %s with PWD: %s" CR), WifiManager_ssid, wm_password.c_str());
+    Log.notice(F("Connect your phone to WIFI AP: %s with PWD: %s" CR), WifiManager_ssid, WifiManager_password);
     //fetches ssid and pass and tries to connect
     //if it does not connect it starts an access point with the specified name
     //and goes into a blocking loop awaiting configuration
-    if (!wifiManager.autoConnect(WifiManager_ssid, wm_password.c_str())) {
+    if (!wifiManager.autoConnect(WifiManager_ssid, WifiManager_password)) {
       Log.warning(F("failed to connect and hit timeout" CR));
       delay(3000);
       //reset and try again

platformio.ini

@@ -292,7 +292,7 @@ build_flags =
   '-DZgatewayWeatherStation="WeatherStation"'
   '-DsimplePublishing=true'
   '-DWM_PWD_FROM_MAC=true'
-  '-DGateway_Name="OpenMQTTGateway_ESP32_ALL"'
+  '-DUSE_MAC_AS_GATEWAY_NAME=true'
 
 [env:esp32dev-rf]
 platform = ${com.esp32_platform}