diff --git a/User_config.h b/User_config.h
index 5a9f2e2..187864b 100644
--- a/User_config.h
+++ b/User_config.h
@@ -113,6 +113,7 @@ RF supported protocols
 #define repeatIRwMQTT false // do we repeat a received signal by using mqtt
 
 #define pubIRunknownPrtcl false // key to avoid mqtt publication of unknown IR protocol (set to true if you want to publish unknown protocol)
+#define PanasonicAddress      0x4004     // Panasonic address (Pre data) 
 
 #ifdef ESP8266 //IR supported protocols on ESP8266, all supported per default
   #define IR_GC
@@ -125,6 +126,8 @@ RF supported protocols
   #define IR_RC5
   #define IR_Sharp
   #define IR_SAMSUNG
+  #define IR_PANASONIC
+  #define IR_RCMM
 #else //IR supported protocols on arduino uncomment if you want to send with this protocol, NEC protocol is available per default
   //#define IR_COOLIX
   //#define IR_Whynter
@@ -135,6 +138,7 @@ RF supported protocols
   //#define IR_Sharp
   //#define IR_SAMSUNG
   //#define IR_Raw
+  //#define IR_PANASONIC
 #endif
 
 /*----------------------BT topics-------------------------*/
diff --git a/ZgatewayIR.ino b/ZgatewayIR.ino
index 4a8e778..b73f973 100644
--- a/ZgatewayIR.ino
+++ b/ZgatewayIR.ino
@@ -67,9 +67,9 @@ boolean IRtoMQTT(){
     trc(rawCode);
     irrecv.resume(); // Receive the next value
     if (pubIRunknownPrtcl == false && MQTTprotocol == "-1"){ // don't publish unknown IR protocol
-      trc(F("---don't publish the code unknown protocol---"));
+      trc(F("---no publish unknown protocol---"));
     } else if (!isAduplicate(MQTTvalue) && MQTTvalue!=0) {// conditions to avoid duplications of RF -->MQTT
-        trc(F("Sending adv data to MQTT"));
+        trc(F("Adv data IRtoMQTT"));
         client.publish(subjectIRtoMQTTprotocol,(char *)MQTTprotocol.c_str());
         client.publish(subjectIRtoMQTTbits,(char *)MQTTbits.c_str());
         client.publish(subjectIRtoMQTTRaw,(char *)rawCode.c_str());          
@@ -78,7 +78,7 @@ boolean IRtoMQTT(){
         trc(value);
         boolean result = client.publish(subjectIRtoMQTT,(char *)value.c_str());
         if (repeatIRwMQTT){
-            trc(F("Publishing IR so as to repeat it"));
+            trc(F("Publishing IR for repeat"));
             client.publish(subjectMQTTtoIR,(char *)value.c_str());
         }
         return result;
@@ -238,10 +238,23 @@ void MQTTtoIR(char * topicOri, char * datacallback) {
     signalSent = true;
   }
   #endif
+  #ifdef IR_PANASONIC
+  if (strstr(topicOri, "IR_PANASONIC") != NULL){
+    irsend.sendPanasonic(PanasonicAddress, data);
+    signalSent = true;
+  }
+  #endif
+  #ifdef IR_RCMM
+  if (strstr(topicOri, "IR_RCMM") != NULL){
+    if (valueBITS == 0) valueBITS = 32;
+    irsend.sendRCMM(data, valueBITS);
+    signalSent = true;
+  }
+  #endif
   if (signalSent){ // we acknowledge the sending by publishing the value to an acknowledgement topic, for the moment even if it is a signal repetition we acknowledge also
     boolean result = client.publish(subjectGTWIRtoMQTT, datacallback);
     if (result){
-      trc(F("Signal sent by IR ack published"));
+      trc(F("MQTTtoIR OK ack published"));
       trc(String(data));
       };
   }
diff --git a/ZgatewayRF.ino b/ZgatewayRF.ino
index c805b68..e8c93b5 100644
--- a/ZgatewayRF.ino
+++ b/ZgatewayRF.ino
@@ -43,7 +43,7 @@ void setupRF(){
 boolean RFtoMQTT(){
 
   if (mySwitch.available()){
-    trc(F("Receiving 433Mhz"));
+    trc(F("Receiving RF"));
     unsigned long MQTTvalue = 0;
     String MQTTprotocol;
     String MQTTbits;
@@ -54,7 +54,7 @@ boolean RFtoMQTT(){
     MQTTlength = String(mySwitch.getReceivedDelay());
     mySwitch.resetAvailable();
     if (!isAduplicate(MQTTvalue) && MQTTvalue!=0) {// conditions to avoid duplications of RF -->MQTT
-        trc(F("Sending advanced signal to MQTT"));
+        trc(F("Adv data RFtoMQTT"));
         client.publish(subjectRFtoMQTTprotocol,(char *)MQTTprotocol.c_str());
         client.publish(subjectRFtoMQTTbits,(char *)MQTTbits.c_str());    
         client.publish(subjectRFtoMQTTlength,(char *)MQTTlength.c_str());    
@@ -63,7 +63,7 @@ boolean RFtoMQTT(){
         trc(value);
         boolean result = client.publish(subjectRFtoMQTT,(char *)value.c_str());
         if (repeatRFwMQTT){
-            trc(F("Publishing IR signal so as to repeat it"));
+            trc(F("Publishing RF for repeat"));
             client.publish(subjectMQTTtoRF,(char *)value.c_str());
         }
         return result;
@@ -86,7 +86,7 @@ void MQTTtoRF(char * topicOri, char * datacallback) {
   if (pos != -1){
     pos = pos + +strlen(RFprotocolKey);
     valuePRT = (topic.substring(pos,pos + 1)).toInt();
-    trc(F("RF Protocol number:"));
+    trc(F("RF Protocol:"));
     trc(String(valuePRT));
   }
   //We look into the subject to see if a special RF pulselength is defined 
@@ -101,12 +101,12 @@ void MQTTtoRF(char * topicOri, char * datacallback) {
   if (pos3 != -1){
     pos3 = pos3 + strlen(RFbitsKey);
     valueBITS = (topic.substring(pos3,pos3 + 2)).toInt();
-    trc(F("Bits number:"));
+    trc(F("Bits nb:"));
     trc(String(valueBITS));
   }
   
   if ((topic == subjectMQTTtoRF) && (valuePRT == 0) && (valuePLSL  == 0) && (valueBITS == 0)){
-    trc(F("MQTTtoRF default parameters"));
+    trc(F("MQTTtoRF default"));
     mySwitch.setProtocol(1,350);
     mySwitch.send(data, 24);
     // Acknowledgement to the GTWRF topic
@@ -126,7 +126,7 @@ void MQTTtoRF(char * topicOri, char * datacallback) {
     // Acknowledgement to the GTWRF topic 
     boolean result = client.publish(subjectGTWRFtoMQTT, datacallback);// we acknowledge the sending by publishing the value to an acknowledgement topic, for the moment even if it is a signal repetition we acknowledge also
     if (result){
-      trc(F("MQTTtoRF OK and ack published"));
+      trc(F("MQTTtoRF OK ack published"));
       trc(String(data));
       };
   }