From bdaf097c04190386deff6763602720c110829f67 Mon Sep 17 00:00:00 2001 From: Northern Man Date: Fri, 11 Jun 2021 20:33:10 -0400 Subject: [PATCH] Resolve incorrect wiring instructions (#984) As identified in this forum post ( https://community.openmqttgateway.com/t/rtl-433-esp32-bme280-but-what-ra dio/1563) , the default builds have incorrect connections for the RTL_433 module. This fixes the default build configuration and crispness the documentation. Co-authored-by: Northern Man --- docs/setitup/rf.md | 4 ++-- platformio.ini | 4 ---- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/docs/setitup/rf.md b/docs/setitup/rf.md index fc108ec..6f84a73 100644 --- a/docs/setitup/rf.md +++ b/docs/setitup/rf.md @@ -25,10 +25,10 @@ Connect the Emitter and Receiver to a 5V (**3.3V** for CC1101) supply source, an |Board|Receiver Pin(GDO2)|Emitter Pin(GDO0)|SCK|VCC|MOSI|MISO|CSN|GND |-|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:| |ESP8266|D2/**D3**/D1/D8|**RX**/D2|D5|**3V3**|D7|D6|D8|GND -|ESP32|**27**/26|12|D18|**3V3**|D23|D19|D5|GND +|ESP32|**D27**|D12|D18|**3V3**|D23|D19|D5|GND To use the CC1101 module, `ZradioCC1101` must be uncomment in the `User_config.h` or added to the `build_flags`. -More information about the [CC1101 wiring](https://github.com/LSatan/SmartRC-CC1101-Driver-Lib#wiring). +More information about the [CC1101 wiring](https://github.com/LSatan/SmartRC-CC1101-Driver-Lib#wiring). ( Please note that with OMG we are recommending CC1101 GDO2 to be connected to ESP32 D27 and GDO0 to be connected to D12, this is different than the LSatan diagram. This is due to the ESP32 using D2 as part of the boot process. ) ## Arduino Hardware setup diff --git a/platformio.ini b/platformio.ini index def748e..d20983a 100644 --- a/platformio.ini +++ b/platformio.ini @@ -561,8 +561,6 @@ build_flags = '-DZradioCC1101="CC1101"' '-DZgatewayRTL_433="rtl_433"' '-DGateway_Name="OpenMQTTGateway_rtl_433_ESP"' - '-DRF_RECEIVER_GPIO=4' ; CC1101 - GDO2 - '-DRF_EMITTER_GPIO=2' ; CC1101 - GDO0 '-DvalueAsASubject=true' ; mqtt topic includes model and device ; '-DPUBLISH_UNPARSED=true' ; Publish details of undecoded signals ; '-DRTL_DEBUG=4' ; enable rtl_433 verbose device decode @@ -586,8 +584,6 @@ build_flags = '-DZgatewayPilight="Pilight"' '-DZradioCC1101="CC1101"' '-DGateway_Name="OpenMQTTGateway_multi_receiver"' - '-DRF_RECEIVER_GPIO=4' ; CC1101 - GDO2 - '-DRF_EMITTER_GPIO=2' ; CC1101 - GDO0 '-DvalueAsASubject=true' ; mqtt topic includes model and device (rtl_433) or protocol and id ( RF and PiLight ) ; '-DDEFAULT_RECEIVER=1' ; Default receiver to enable on startup