update (#489)

add fastled doc

add links to bootloaders and boot app0

Arduino IDE upload instructions add

add community

docs/upload/arduino-ide.md

@@ -0,0 +1,26 @@
+# Upload with Arduino IDE
+
+* First download the last version of the Arduino IDE from the arduino [website](https://www.arduino.cc/en/Main/Software)
+* Add ESP32 boards by following this [tutorial](https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md)
+* Add ESP8266 boards by following this [tutorial](https://github.com/esp8266/Arduino#installing-with-boards-manager)
+* Download OpenMQTTGateway code from the [release page](https://github.com/1technophile/OpenMQTTGateway/releases)
+* Download the libraries package corresponding to your board and module wished into the same page (example esp32-m5stick-c-ble-libraries.zip)
+* Unzip the libraries into your arduino libraries folder (example D:/Users/XXXX/Documents/Arduino/libraries)
+* Open the file main.ino from OpenMQTTGateway/main folder
+* Change the settings and the desired gateways into user_config.h (uncomment the modules you want)
+
+*Example for the use of RF gateway*
+```C++
+#define ZgatewayRF     "RF"       //ESP8266, Arduino, ESP32
+//#define ZgatewayIR     "IR"       //ESP8266, Arduino,         Sonoff RF Bridge
+//#define ZgatewayLORA   "LORA"       //ESP8266, Arduino, ESP32
+//#define ZgatewayPilight "Pilight" //ESP8266, Arduino, ESP32
+//#define ZgatewayBT     "BT"       //ESP8266, ESP32
+```
+
+* Change the pins or parameters corresponding to the modules choosen, for RF you can change the pins into config_RF.h
+* Choose the board on the Arduino IDE
+* Select the port corresponding to the board
+* Open the serial monitor and set 115200 bauds
+* Upload ➡️
+* You should see the logs into the serial monitor

docs/upload/binaries.md

@@ -5,6 +5,8 @@ Nevertheless you will not be able to change advanced parameters, if you want to
 Download the binary corresponding to your board and gateway [here](https://github.com/1technophile/OpenMQTTGateway/releases) from github and uncompress it.
 
 ## ESP32
+* Download the bootloader [here](https://github.com/espressif/arduino-esp32/raw/master/tools/sdk/bin/bootloader_dio_80m.bin)
+* Download the boot_app0 from [here](https://github.com/espressif/arduino-esp32/raw/master/tools/partitions/boot_app0.bin)
 * Download the flash tool utility from espressif:
 https://www.espressif.com/en/products/hardware/esp32/resources
 * Uncompress the package