Fix actuator manual control with button press and overheat protection (#1403)

Manual control with a button press triggered the relay but 2 times (when pressing and releasing), fixing this.

Check that we have two consecutive readings of temperature above the threshold to trigger the actuator to OFF
And remove it by default to the shelly, as I see unjustified jumps of temperature above 80C.

main/ZsensorGPIOInput.ino

@@ -89,7 +89,14 @@ void MeasureGPIOInput() {
 
 #  if defined(ZactuatorONOFF) && defined(ACTUATOR_TRIGGER)
       //Trigger the actuator if we are not at startup
-      if (InputState != 3) ActuatorManualTrigger(InputState);
+      if (InputState != 3) {
+#    if defined(ACTUATOR_BUTTON_TRIGGER_LEVEL)
+        if (InputState == ACTUATOR_BUTTON_TRIGGER_LEVEL)
+          ActuatorTrigger(); // Button press trigger
+#    else
+        ActuatorTrigger(); // Switch trigger
+#    endif
+      }
 #  endif
       InputState = reading;
     }