put home as a #define and add gateway name to all topics

#160

User_config.h

@@ -38,10 +38,11 @@ char mqtt_user[20] = "your_username"; // not compulsory only if your broker need
 char mqtt_pass[20] = "your_password"; // not compulsory only if your broker needs authentication
 char mqtt_server[40] = "192.168.1.17";
 char mqtt_port[6] = "1883";
-#define Gateway_Name "OpenMQTTGateway"
+#define Gateway_Name "/OpenMQTTGateway"
+#define Base_Topic "home"
 #define WifiManager_password "your_password"
-#define version_Topic "home/" Gateway_Name "/version"
+#define version_Topic  Base_Topic Gateway_Name "/version"
-#define will_Topic "home/" Gateway_Name "/LWT"
+#define will_Topic  Base_Topic Gateway_Name "/LWT"
 #define will_QoS 0
 #define will_Retain true
 #define will_Message "Offline"
@@ -169,7 +170,7 @@ const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
 #endif
 /*--------------MQTT general topics-----------------*/
 // global MQTT subject listened by the gateway to execute commands (send RF, IR or others)
-#define subjectMQTTtoX "home/commands/#"
+#define subjectMQTTtoX  Base_Topic Gateway_Name "/commands/#"
 #define subjectMultiGTWKey "toMQTT"
 
 //variables to avoid duplicates

config_ADC.h

@@ -26,7 +26,7 @@
 
 /*----------------------------USER PARAMETERS-----------------------------*/
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
-#define ADC   "home/ADCtoMQTT"
+#define ADC  Base_Topic Gateway_Name "/ADCtoMQTT"
 #define TimeBetweenReadingADC 200 // time between 2 ADC readings, minimum 200 to let the time of the ESP to keep the connection
 #define ThresholdReadingADC 50  //  following the comparison between the previous value and the current one +- the threshold the value will be published or not
 

config_BH1750.h

@@ -41,9 +41,9 @@
 
 /*----------------------------USER PARAMETERS-----------------------------*/
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
-#define LUX   "home/LIGHTtoMQTT/lux"
+#define LUX    Base_Topic Gateway_Name "/LIGHTtoMQTT/lux"
-#define FTCD  "home/LIGHTtoMQTT/ftcd"
+#define FTCD   Base_Topic Gateway_Name "/LIGHTtoMQTT/ftcd"
-#define WATTSM2  "home/LIGHTtoMQTT/wattsm2"
+#define WATTSM2   Base_Topic Gateway_Name "/LIGHTtoMQTT/wattsm2"
 
 //Time used to wait for an interval before resending measured values
 unsigned long timebh1750 = 0;

config_BME280.h

@@ -41,12 +41,12 @@
 
 /*----------------------------USER PARAMETERS-----------------------------*/
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
-#define TEMPBMEC  "home/CLIMAtoMQTT/bme/tempc"
+#define TEMPBMEC   Base_Topic Gateway_Name "/CLIMAtoMQTT/bme/tempc"
-#define TEMPBMEF  "home/CLIMAtoMQTT/bme/tempf"
+#define TEMPBMEF   Base_Topic Gateway_Name "/CLIMAtoMQTT/bme/tempf"
-#define HUMBME   "home/CLIMAtoMQTT/bme/hum"
+#define HUMBME    Base_Topic Gateway_Name "/CLIMAtoMQTT/bme/hum"
-#define PRESSBME   "home/CLIMAtoMQTT/bme/pa"
+#define PRESSBME    Base_Topic Gateway_Name "/CLIMAtoMQTT/bme/pa"
-#define ALTIBMEM   "home/CLIMAtoMQTT/bme/altim"
+#define ALTIBMEM    Base_Topic Gateway_Name "/CLIMAtoMQTT/bme/altim"
-#define ALTIBMEFT   "home/CLIMAtoMQTT/bme/altift"
+#define ALTIBMEFT    Base_Topic Gateway_Name "/CLIMAtoMQTT/bme/altift"
 
 //Time used to wait for an interval before resending measured values
 unsigned long timebme280 = 0;

config_BT.h

@@ -24,7 +24,7 @@
     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 /*----------------------BT topics & parameters-------------------------*/
-#define subjectBTtoMQTT "home/BTtoMQTT/"
+#define subjectBTtoMQTT  Base_Topic Gateway_Name "/BTtoMQTT/"
 #define TimeBtw_Read 20000 //define the time between 2 scans
 #define Scan_duration 10 //define the time for a scan
 #define HM-10 

config_DHT.h

@@ -26,8 +26,8 @@
 
 /*----------------------------USER PARAMETERS-----------------------------*/
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
-#define HUM1   "home/DHTtoMQTT/dht1/hum"
+#define HUM1    Base_Topic Gateway_Name "/DHTtoMQTT/dht1/hum"
-#define TEMP1  "home/DHTtoMQTT/dht1/temp"
+#define TEMP1   Base_Topic Gateway_Name "/DHTtoMQTT/dht1/temp"
 #define dht_always true // if false when the current value for temp or hum is the same as previous one don't send it by MQTT
 #define TimeBetweenReadingDHT 30000 // time between 2 DHT readings
 /*-------------DHT SENSOR TYPE-------------*/

config_HCSR501.h

@@ -26,7 +26,7 @@
 
 /*----------------------------USER PARAMETERS-----------------------------*/
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
-#define subjectHCSR501toMQTT   "home/HCSR501toMQTT"
+#define subjectHCSR501toMQTT    Base_Topic Gateway_Name "/HCSR501toMQTT"
 #define TimeBeforeStartHCSR501 60000 //define the time necessary for HC SR501 init
 
 /*-------------------PIN DEFINITIONS----------------------*/

config_INA226.h

@@ -26,9 +26,9 @@
 
 /*----------------------------USER PARAMETERS-----------------------------*/
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
-#define subjectVolttoMQTT "home/INA226toMQTT/Volt"
+#define subjectVolttoMQTT  Base_Topic Gateway_Name "/INA226toMQTT/Volt"
-#define subjectCurrenttoMQTT "home/INA226toMQTT/Current"        
+#define subjectCurrenttoMQTT  Base_Topic Gateway_Name "/INA226toMQTT/Current"        
-#define subjectPowertoMQTT "home/INA226toMQTT/Power" 
+#define subjectPowertoMQTT  Base_Topic Gateway_Name "/INA226toMQTT/Power" 
 #define TimeBetweenReadingINA226 30000 // time between 2 INA226 readings
 
 

config_IR.h

@@ -26,12 +26,12 @@
 
 /*-------------------IR topics & parameters----------------------*/
 //IR MQTT Subjects
-#define subjectGTWIRtoMQTT "home/IRtoMQTT"
+#define subjectGTWIRtoMQTT  Base_Topic Gateway_Name "/IRtoMQTT"
-#define subjectIRtoMQTT "home/IRtoMQTT"
+#define subjectIRtoMQTT  Base_Topic Gateway_Name "/IRtoMQTT"
-#define subjectMQTTtoIR "home/commands/MQTTtoIR"
+#define subjectMQTTtoIR  Base_Topic Gateway_Name "/commands/MQTTtoIR"
-#define subjectIRtoMQTTprotocol "home/IRtoMQTT/protocol"
+#define subjectIRtoMQTTprotocol  Base_Topic Gateway_Name "/IRtoMQTT/protocol"
-#define subjectIRtoMQTTbits "home/IRtoMQTT/bits"
+#define subjectIRtoMQTTbits  Base_Topic Gateway_Name "/IRtoMQTT/bits"
-#define subjectIRtoMQTTRaw "home/IRtoMQTT/raw"
+#define subjectIRtoMQTTRaw  Base_Topic Gateway_Name "/IRtoMQTT/raw"
 // subject monitored to listen traffic processed by other gateways to store data and avoid ntuple
 #define subjectMultiGTWIR "+/IRtoMQTT"
 #define IRbitsKey "IRBITS_" // bits  will be defined if a subject contains IRbitsKey followed by a value of 2 digits

config_RF.h

@@ -26,12 +26,12 @@
 
 /*-------------------RF topics & parameters----------------------*/
 //433Mhz MQTT Subjects and keys
-#define subjectMQTTtoRF "home/commands/MQTTto433"
+#define subjectMQTTtoRF  Base_Topic Gateway_Name "/commands/MQTTto433"
-#define subjectRFtoMQTT "home/433toMQTT"
+#define subjectRFtoMQTT  Base_Topic Gateway_Name "/433toMQTT"
-#define subjectGTWRFtoMQTT "home/433toMQTT"
+#define subjectGTWRFtoMQTT  Base_Topic Gateway_Name "/433toMQTT"
-#define subjectRFtoMQTTprotocol "home/433toMQTT/protocol"
+#define subjectRFtoMQTTprotocol  Base_Topic Gateway_Name "/433toMQTT/protocol"
-#define subjectRFtoMQTTbits "home/433toMQTT/bits"
+#define subjectRFtoMQTTbits  Base_Topic Gateway_Name "/433toMQTT/bits"
-#define subjectRFtoMQTTlength "home/433toMQTT/length"
+#define subjectRFtoMQTTlength  Base_Topic Gateway_Name "/433toMQTT/length"
 #define RFprotocolKey "433_" // protocol will be defined if a subject contains RFprotocolKey followed by a value of 1 digit
 #define RFbitsKey "RFBITS_" // bits  will be defined if a subject contains RFbitsKey followed by a value of 2 digits
 #define repeatRFwMQTT false // do we repeat a received signal by using mqtt
@@ -52,8 +52,8 @@ RF supported protocols
 
 /*-------------------RF2 topics & parameters----------------------*/
 //433Mhz newremoteswitch MQTT Subjects and keys
-#define subjectMQTTtoRF2 "home/commands/MQTTtoRF2"
+#define subjectMQTTtoRF2  Base_Topic Gateway_Name "/commands/MQTTtoRF2"
-#define subjectRF2toMQTT "home/RF2toMQTT"
+#define subjectRF2toMQTT  Base_Topic Gateway_Name "/RF2toMQTT"
 #define RF2codeKey "CODE_" // code will be defined if a subject contains RF2codeKey followed by a value of 7 digits
 #define RF2periodKey "PERIOD_" // period  will be defined if a subject contains RF2periodKey followed by a value of 3 digits
 #define RF2unitKey "UNIT_"  // number of your unit value  will be defined if a subject contains RF2unitKey followed by a value of 1-2 digits

config_RFM69.h

@@ -27,16 +27,16 @@
 /*----------------------RFM69 topics & parameters -------------------------*/
 // Topic where the message from RFM69 will be published by the gateway,
 // appended with the nodeID of the sender
-#define subjectRFM69toMQTT "home/RFM69toMQTT"
+#define subjectRFM69toMQTT  Base_Topic Gateway_Name "/RFM69toMQTT"
 // Upon reception of a packed, the RSSI of that packet will be publish to this topic,
 // appended with the nodeID of the sender
-#define subjectRFM69toMQTTrssi "home/RFM69toMQTT/rssi"  // Comment this if you don't want the RSSI to be published.
+#define subjectRFM69toMQTTrssi  Base_Topic Gateway_Name "/RFM69toMQTT/rssi"  // Comment this if you don't want the RSSI to be published.
-#define subjectRFM69toMQTTsender "home/RFM69toMQTT/sender"
+#define subjectRFM69toMQTTsender  Base_Topic Gateway_Name "/RFM69toMQTT/sender"
 // Topic subscribed by the gateway. Messages received will be sent to RFM69
-#define subjectMQTTtoRFM69 "home/commands/MQTTtoRFM69"
+#define subjectMQTTtoRFM69  Base_Topic Gateway_Name "/commands/MQTTtoRFM69"
 #define RFM69receiverKey "RCV_" // receiver id will be defined if a subject contains RFM69receiverKey followed by a value of 3 digits
 // On reception of an ack from RFM69, the message that has been sent is published here
-#define subjectGTWRFM69toMQTT "home/RFM69toMQTT/acked"
+#define subjectGTWRFM69toMQTT  Base_Topic Gateway_Name "/RFM69toMQTT/acked"
 #define defaultRFM69ReceiverId 99
 
 // Default values

config_SRFB.h

@@ -27,14 +27,14 @@
 
 /*-------------------RF topics & parameters----------------------*/
 //433Mhz MQTT Subjects and keys
-#define subjectMQTTtoSRFB "home/commands/MQTTtoSRFB"
+#define subjectMQTTtoSRFB  Base_Topic Gateway_Name "/commands/MQTTtoSRFB"
-#define subjectMQTTtoSRFBRaw "home/commands/MQTTtoSRFB/Raw"
+#define subjectMQTTtoSRFBRaw  Base_Topic Gateway_Name "/commands/MQTTtoSRFB/Raw"
-#define subjectSRFBtoMQTTTsyn "home/SRFBtoMQTT/Tsyn"
+#define subjectSRFBtoMQTTTsyn  Base_Topic Gateway_Name "/SRFBtoMQTT/Tsyn"
-#define subjectSRFBtoMQTTTlow "home/SRFBtoMQTT/Tlow"
+#define subjectSRFBtoMQTTTlow  Base_Topic Gateway_Name "/SRFBtoMQTT/Tlow"
-#define subjectSRFBtoMQTTThigh "home/SRFBtoMQTT/Thigh"
+#define subjectSRFBtoMQTTThigh  Base_Topic Gateway_Name "/SRFBtoMQTT/Thigh"
-#define subjectSRFBtoMQTT "home/SRFBtoMQTT"
+#define subjectSRFBtoMQTT  Base_Topic Gateway_Name "/SRFBtoMQTT"
-#define subjectGTWSRFBtoMQTT "home/SRFBtoMQTT"
+#define subjectGTWSRFBtoMQTT  Base_Topic Gateway_Name "/SRFBtoMQTT"
-#define subjectSRFBtoMQTTRaw "home/SRFBtoMQTT/Raw"
+#define subjectSRFBtoMQTTRaw  Base_Topic Gateway_Name "/SRFBtoMQTT/Raw"
 #define SRFBRptKey "RPT_"
 #define SRFBmaxipulselengthKey "Thigh_"
 #define SRFBminipulselengthKey "Tlow_"

config_TSL2561.h

@@ -40,9 +40,9 @@
 #define TimeBetweenReadingtsl2561 30000  
 /*----------------------------USER PARAMETERS-----------------------------*/
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
-#define LUX      "home/LIGHTtoMQTT/lux"
+#define LUX       Base_Topic Gateway_Name "/LIGHTtoMQTT/lux"
-#define FTCD     "home/LIGHTtoMQTT/ftcd"
+#define FTCD      Base_Topic Gateway_Name "/LIGHTtoMQTT/ftcd"
-#define WATTSM2  "home/LIGHTtoMQTT/wattsm2"
+#define WATTSM2   Base_Topic Gateway_Name "/LIGHTtoMQTT/wattsm2"
 
 //Time used to wait for an interval before resending measured values
 unsigned long timetsl2561 = 0;