simplify user_config.h

as test_config.h represents now the modules we want to tests per board there is no need of keeping differenciation into user_config.h

User_config.h

@@ -83,89 +83,48 @@ const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
 
 /*-------------DEFINE THE MODULES YOU WANT BELOW----------------*/
 //Addons and module management, comment the Z line and the config file if you don't use
-#ifdef ESP8266 // for nodemcu, weemos and esp8266
+
-  #define ZgatewayRF
+#define ZgatewayRF //ESP8266, Arduino, ESP32
-  #include "config_RF.h"
+#include "config_RF.h"
-  //#define ZgatewayRF2
+
-  //#define ZgatewaySRFB
+//#define ZgatewayRF2 //ESP8266, Arduino, ESP32
-  //#include "config_SRFB.h"
+
-  #define ZgatewayIR
+//#define ZgatewaySRFB //Sonoff RF Bridge
-  #include "config_IR.h"
+//#include "config_SRFB.h"
-  #define ZgatewayBT
+
-  #include "config_BT.h"
+#define ZgatewayIR //ESP8266, Arduino, Sonoff RF Bridge
-  //#define ZactuatorONOFF
+#include "config_IR.h"
-  //#include "config_ONOFF.h"
+
-  //#define ZsensorINA226
+#define ZgatewayBT //ESP8266, Arduino, ESP32
-  //#include "config_INA226.h"
+#include "config_BT.h"
-  //#define ZsensorHCSR501
+
-  //#include "config_HCSR501.h"
+//#define ZactuatorONOFF //ESP8266, Arduino, ESP32, Sonoff RF Bridge
-  //#define ZsensorADC
+//#include "config_ONOFF.h"
-  //#include "config_ADC.h"
+
-  //#define ZsensorBH1750
+//#define ZsensorINA226 //ESP8266, Arduino, ESP32
-  //#include "config_BH1750.h"
+//#include "config_INA226.h"
-  //#define ZsensorTSL2561
+
-  //#include "config_TSL2561.h"
+//#define ZsensorHCSR501 //ESP8266, Arduino, ESP32, Sonoff RF Bridge
-  //#define ZsensorBME280
+//#include "config_HCSR501.h"
-  //#include "config_BME280.h"
+
-  //#define ZsensorDHT // If you uncomment this you can't use I2C due to the fact that I2C use also D1
+//#define ZsensorADC //ESP8266, Arduino, ESP32
-  //#include "config_DHT.h"
+//#include "config_ADC.h"
-  //#define ZgatewayRFM69 // If you uncomment this you can't use RF and BT due to the fact that RF use also D8 and BT use also D6/D7
+
-  //#include "config_RFM69.h"
+//#define ZsensorBH1750 //ESP8266, Arduino, ESP32
-#elif ESP32
+//#include "config_BH1750.h"
-  #define ZgatewayRF
+
-  #include "config_RF.h"
+//#define ZsensorTSL2561 //ESP8266, Arduino, ESP32
-  //#define ZgatewayRF2
+//#include "config_TSL2561.h"
-  //#define ZgatewayIR
+
-  //#include "config_IR.h"
+//#define ZsensorBME280 //ESP8266, Arduino, ESP32
-  #define ZgatewayBT
+//#include "config_BME280.h"
-  #include "config_BT.h"
+
-  //#define ZactuatorONOFF
+//#define ZsensorDHT //ESP8266, Arduino, ESP32, Sonoff RF Bridge
-  //#include "config_ONOFF.h"
+//#include "config_DHT.h"
-  //#define ZsensorINA226
+
-  //#include "config_INA226.h"
+//#define ZgatewayRFM69 //ESP8266, Arduino, ESP32
-  //#define ZsensorHCSR501
+//#include "config_RFM69.h"
-  //#include "config_HCSR501.h"
+
-  //#define ZsensorADC
-  //#include "config_ADC.h"
-  //#define ZsensorBH1750
-  //#include "config_BH1750.h"
-  //#define ZsensorBME280
-  //#include "config_BME280.h"
-  //#define ZsensorDHT // If you uncomment this you can't use I2C due to the fact that I2C use also D1
-  //#include "config_DHT.h"
-  //#define ZgatewayRFM69 // If you uncomment this you can't use RF and BT due to the fact that RF use also D8 and BT use also D6/D7
-  //#include "config_RFM69.h"
-#else // for arduino + W5100
-  #define ZgatewayRF
-  #include "config_RF.h"
-  //#define ZgatewayRF2 // too big for UNO
-  //#define ZgatewayRFM69 not tested
-  //#include "config_RFM69.h"
-  #define ZgatewayIR
-  #include "config_IR.h"
-  #define ZgatewayBT
-  #include "config_BT.h"
-  //#define ZactuatorONOFF
-  //#include "config_ONOFF.h"
-  //#define ZsensorINA226
-  //#include "config_INA226.h"
-  //#define ZsensorDHT
-  //#include "config_DHT.h"
-  //#define ZsensorBH1750
-  //#include "config_BH1750.h"
-  //#define ZsensorTSL2561
-  //#include "config_TSL2561.h"
-  //#define ZsensorBME280
-  //#include "config_BME280.h"
-  //#define ZsensorHCSR501
-  //#include "config_HCSR501.h"
-  //#define ZsensorADC
-  //#include "config_ADC.h"
-  //#define ZgatewayRFM69 not tested
-  //#include "config_RFM69.h" 
-  //#define ZsensorINA226
-  //#include "config_INA226.h" 
-#endif
 /*----------------------------OTHER PARAMETERS-----------------------------*/
 /*-------------------CHANGING THEM IS NOT COMPULSORY-----------------------*/
 /*----------------------------USER PARAMETERS-----------------------------*/