Platformio integration (#424)

* adaptation of structure to platformio

* also remove zgatewayRF315 (not usefull)

* replace boolean by bool

#155

main/config_DHT.h

@@ -0,0 +1,49 @@
+/*  
+  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 
+
+   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
+   Send and receiving command by MQTT
+ 
+   This files enables to set your parameter for the DHT11/22 sensor
+  
+    Copyright: (c)Florian ROBERT
+  
+    This file is part of OpenMQTTGateway.
+    
+    OpenMQTTGateway is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenMQTTGateway is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef config_DHT_h
+#define config_DHT_h
+
+extern void setupDHT();
+extern void DHTtoMQTT();
+/*----------------------------USER PARAMETERS-----------------------------*/
+/*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
+#define DHTTOPIC    Base_Topic Gateway_Name "/DHTtoMQTT/dht1"
+#define dht_always true // if false when the current value for temp or hum is the same as previous one don't send it by MQTT
+#define TimeBetweenReadingDHT 30000 // time between 2 DHT readings
+/*-------------DHT SENSOR TYPE-------------*/
+//#define DHT_SENSOR_TYPE DHT11 //uncomment for DHT11 Sensor
+//#define DHT_SENSOR_TYPE DHT21 //uncomment for DHT21 Sensor
+#define DHT_SENSOR_TYPE DHT22 //uncomment for DHT22 Sensor (default for backwards compatibility)
+/*-------------------PIN DEFINITIONS----------------------*/
+#if defined(ESP8266)
+  #define DHT_RECEIVER_PIN 5 //5 = D1 you can put 14 = D5 if you don't use HCSR501 sensor and the RFM69
+#elif defined(ESP32)
+  #define DHT_RECEIVER_PIN 16
+#else
+  #define DHT_RECEIVER_PIN 8
+#endif
+
+#endif