Platformio integration (#424)

* adaptation of structure to platformio

* also remove zgatewayRF315 (not usefull)

* replace boolean by bool

#155

main/config_BT.h

@@ -0,0 +1,76 @@
+/*  
+  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 
+
+   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
+   Send and receiving command by MQTT
+ 
+   This files enables to set your parameter for the bluetooth low energy gateway (beacons detection)
+  
+    Copyright: (c)Florian ROBERT
+  
+    This file is part of OpenMQTTGateway.
+    
+    OpenMQTTGateway is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenMQTTGateway is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef config_BT_h
+#define config_BT_h
+
+extern void setupBT();
+extern bool BTtoMQTT();  
+extern void MQTTtoBT(char * topicOri, JsonObject& RFdata);
+/*----------------------BT topics & parameters-------------------------*/
+#define subjectBTtoMQTT  Base_Topic Gateway_Name "/BTtoMQTT/"
+#define subjectMQTTtoBTset  Base_Topic Gateway_Name "/commands/MQTTtoBT/set"
+#define TimeBtw_Read 55555 //define default time between 2 scans
+#define Scan_duration 10 //define the time for a scan
+#define HM-10
+//#define HM-11 // uncomment this line if you use HM-11 and comment the line above
+//#define HM_BLUE_LED_STOP true //uncomment to stop the blue led light of HM1X
+#define BLEdelimiter "4f4b2b444953413a"
+#define pubBLEServiceData true // comment if you don't want to publish service data (in case you are having too heavy service data) https://github.com/1technophile/OpenMQTTGateway/issues/318#issuecomment-446064707
+
+/*-------------------HOME ASSISTANT ROOM PRESENCE ----------------------*/
+// if not commented Home presence integration with HOME ASSISTANT is activated
+#define subjectHomePresence Base_Topic "home_presence/" Gateway_Name // will send Home Assistant room presence message to this topic (first part is same for all rooms, second is room name)
+
+unsigned int BLEinterval ; //time between 2 scans
+
+struct BLEdevice{
+  char macAdr[13];
+  bool isDisc;
+  bool isWhtL;
+  bool isBlkL;
+};
+
+struct decompose{
+  char subject[4];
+  int start;
+  int len;
+  bool reverse;
+  char extract[60];
+};
+     
+/*-------------------PIN DEFINITIONS----------------------*/
+#ifdef ESP8266
+  #define BT_RX 13 //D7 ESP8266 RX connect HM-10 or 11 TX
+  #define BT_TX 12 //D6 ESP8266 TX connect HM-10 or 11 RX
+#elif defined(ESP32)
+  #define BT_RX 18 // not tested
+  #define BT_TX 19 // not tested
+#else
+  #define BT_RX 5 //arduino RX connect HM-10 or 11 TX
+  #define BT_TX 6 //arduino TX connect HM-10 or 11 RX
+#endif
+
+#endif