Add TinyPICO board (#1154)

docs/upload/web-install.md

@@ -36,6 +36,7 @@ The table below describes the libraries and the modules of each board configurat
 |esp32feather-ble|ESP32 Feather Adafruit|BLE for the Adafruit Feather board|-|-|X|-|
 |heltec-wifi-lora32-868|ESP32 HELTEC LORA V2|LORA communication 868Mhz  using [arduino-LoRA](https://github.com/sandeepmistry/arduino-LoRa) |-|-|-|X|
 |heltec-wifi-lora32-915|ESP32 HELTEC LORA V2|LORA communication 915Mhz using [arduino-LoRA](https://github.com/sandeepmistry/arduino-LoRa)|-|-|-|X|
+|tinypico-ble|ESP32 TinyPICO|BLE Gateway|-|-|X|-|
 |ttgo-lora32-v1-868|ESP32 TTGO LORA V1|LORA communication 868Mhz using [arduino-LoRA](https://github.com/sandeepmistry/arduino-LoRa)|-|-|-|X|
 |ttgo-lora32-v1-915|ESP32 TTGO LORA V1|LORA communication 915Mhz using [arduino-LoRA](https://github.com/sandeepmistry/arduino-LoRa)|-|-|-|X|
 |ttgo-tbeam|ESP32 TTGO T BEAM|BLE gateway with battery holder|-|-|X|-|

platformio.ini

@@ -54,6 +54,7 @@ extra_configs =
 ;default_envs = esp32-m5stick-c-ble
 ;default_envs = esp32-m5stick-cp-ble
 ;default_envs = esp32-m5atom
+;default_envs = tinypico-ble
 ;default_envs = ttgo-lora32-v1-868
 ;default_envs = ttgo-lora32-v1-915
 ;default_envs = ttgo-t-beam
@@ -719,6 +720,21 @@ build_flags =
   '-DvalueAsASubject=true'  ; mqtt topic includes model and device (rtl_433) or protocol and id ( RF and PiLight )
 ;  '-DDEFAULT_RECEIVER=1'  ; Default receiver to enable on startup
 
+[env:tinypico-ble]
+platform = ${com.esp32_platform}
+board = tinypico
+board_build.partitions = min_spiffs.csv
+lib_deps =
+  ${com-esp.lib_deps}
+  ${libraries.wifimanager32}
+  ${libraries.ble}
+  ${libraries.decoder}
+build_flags =
+  ${com-esp.build_flags}
+  '-DZgatewayBT="BT"'
+  '-DGateway_Name="OpenMQTTGateway_ESP32_TINYPICO_BLE"'
+board_build.flash_mode = dio
+
 [env:ttgo-lora32-v1-868]
 platform = ${com.esp32_platform}
 board = ttgo-lora32-v1