[LED RGB] Enable ON OFF Led power display depending on actuator status (#1451)

Switch ON the power LED to green when the Actuator is ON and switch it OFF when the Actuator is OFF

main/User_config.h

@@ -454,7 +454,13 @@ int lowpowermode = DEFAULT_LOW_POWER_MODE;
 #  define InfoIndicatorON()         digitalWrite(LED_INFO, LED_INFO_ON)
 #  define InfoIndicatorOFF()        digitalWrite(LED_INFO, !LED_INFO_ON)
 #  define CriticalIndicatorON()     // Not used
+#  define CriticalIndicatorON()     // Not used
+#  define PowerIndicatorON()        // Not used
+#  define PowerIndicatorOFF()       // Not used
 #else // Management of Errors, reception/emission and informations indicators with RGB LED
+#  if !defined(CONFIG_IDF_TARGET_ESP32S3) && !defined(CONFIG_IDF_TARGET_ESP32C3) //I2S not available yet with Fastled on S3 and C3
+#    define FASTLED_ESP32_I2S // To avoid ESP32 instabilities https://github.com/FastLED/FastLED/issues/1438
+#  endif
 #  include <FastLED.h>
 CRGB leds[FASTLED_IND_NUM_LEDS];
 #  ifdef FASTLED_IND_DATA_GPIO2 // Only used for Critical Indicator
@@ -480,11 +486,20 @@ CRGB leds2[FASTLED_IND_NUM_LEDS];
 #    define FASTLED_CRITICAL_LED 0 // First Led
 #  endif
 
+#  ifndef FASTLED_IND_DATA_GPIO2
 #    define SetupIndicators()                                                               \
       pinMode(RGB_LED_POWER, OUTPUT);                                                       \
       digitalWrite(RGB_LED_POWER, HIGH);                                                    \
       FastLED.addLeds<FASTLED_IND_TYPE, FASTLED_IND_DATA_GPIO>(leds, FASTLED_IND_NUM_LEDS); \
       FastLED.setBrightness(FASTLED_BRIGHTNESS)
+#  else
+#    define SetupIndicators()                                                                 \
+      pinMode(RGB_LED_POWER, OUTPUT);                                                         \
+      digitalWrite(RGB_LED_POWER, HIGH);                                                      \
+      FastLED.addLeds<FASTLED_IND_TYPE, FASTLED_IND_DATA_GPIO>(leds, FASTLED_IND_NUM_LEDS);   \
+      FastLED.addLeds<FASTLED_IND_TYPE, FASTLED_IND_DATA_GPIO2>(leds2, FASTLED_IND_NUM_LEDS); \
+      FastLED.setBrightness(FASTLED_BRIGHTNESS)
+#  endif
 #  define ErrorIndicatorON()                \
     leds[FASTLED_ERROR_LED] = CRGB::Orange; \
     FastLED.show()
@@ -503,14 +518,18 @@ CRGB leds2[FASTLED_IND_NUM_LEDS];
 #  define InfoIndicatorOFF()              \
     leds[FASTLED_INFO_LED] = CRGB::Black; \
     FastLED.show()
-#  ifdef FASTLED_IND_DATA_GPIO2
+#  ifdef FASTLED_IND_DATA_GPIO2 // Used for relay power indicator
 // For the critical ON indicator there is no method to turn it off, the only way is to unplug the device
 // This enable to have persistence of the indicator to inform the user
 #    define CriticalIndicatorON()          \
-      FastLED.addLeds<FASTLED_IND_TYPE, FASTLED_IND_DATA_GPIO2>(leds2, FASTLED_IND_NUM_LEDS); \
-      FastLED.setBrightness(FASTLED_BRIGHTNESS);                                              \
       leds2[FASTLED_INFO_LED] = CRGB::Red; \
       FastLED.show()
+#    define PowerIndicatorON()               \
+      leds2[FASTLED_INFO_LED] = CRGB::Green; \
+      FastLED.show()
+#    define PowerIndicatorOFF()              \
+      leds2[FASTLED_INFO_LED] = CRGB::Black; \
+      FastLED.show()
 #  endif
 #endif
 

main/ZactuatorONOFF.ino

@@ -55,6 +55,11 @@ void MQTTtoONOFF(char* topicOri, JsonObject& ONOFFdata) {
       Log.notice(F("GPIO number: %d" CR), gpio);
       pinMode(gpio, OUTPUT);
       digitalWrite(gpio, boolSWITCHTYPE);
+      if (boolSWITCHTYPE == ACTUATOR_ON) {
+        PowerIndicatorON();
+      } else {
+        PowerIndicatorOFF();
+      }
       // we acknowledge the sending by publishing the value to an acknowledgement topic
       pub(subjectGTWONOFFtoMQTT, ONOFFdata);
     } else {
@@ -103,6 +108,11 @@ void MQTTtoONOFF(char* topicOri, char* datacallback) {
       ON = false;
 
     digitalWrite(gpio, ON);
+    if (ON == ACTUATOR_ON) {
+      PowerIndicatorON();
+    } else {
+      PowerIndicatorOFF();
+    }
     // we acknowledge the sending by publishing the value to an acknowledgement topic
     char b = ON;
     pub(subjectGTWONOFFtoMQTT, &b);
@@ -161,6 +171,11 @@ void ActuatorTrigger() {
   uint8_t level = !digitalRead(ACTUATOR_ONOFF_GPIO);
   Log.trace(F("Actuator triggered %d" CR), level);
   digitalWrite(ACTUATOR_ONOFF_GPIO, level);
+  if (level == ACTUATOR_ON) {
+    PowerIndicatorON();
+  } else {
+    PowerIndicatorOFF();
+  }
   // Send the state of the switch to the broker so as to update the status
   StaticJsonDocument<JSON_MSG_BUFFER> jsonBuffer;
   JsonObject ONOFFdata = jsonBuffer.to<JsonObject>();