update esppilight lib

content of the library is not filtered on 433mhz only

lib/ESPiLight/pilight/docs/source/protocols/433.92/alarm/index.rst

@@ -0,0 +1,7 @@
+Alarm
+=====
+
+.. toctree::
+   :maxdepth: 1
+
+   secudo

lib/ESPiLight/pilight/docs/source/protocols/433.92/alarm/secudo.rst

@@ -0,0 +1,117 @@
+.. |yes| image:: ../../../images/yes.png
+.. |no| image:: ../../../images/no.png
+
+.. role:: underline
+   :class: underline
+
+Secudo
+======
+
+.. versionadded:: 8.0
+
++------------------+-------------+
+| **Feature**      | **Support** |
++------------------+-------------+
+| Sending          | |no|        |
++------------------+-------------+
+| Receiving        | |yes|       |
++------------------+-------------+
+| Config           | |yes|       |
++------------------+-------------+
+
+.. rubric:: Supported Brands
+
++-----------------------+----------------+
+| **Brand**             | **Protocol**   |
++-----------------------+----------------+
+| Secudo                | secudo         |
++-----------------------+----------------+
+| FlammEx               | secudo         |
++-----------------------+----------------+
+
+.. rubric:: Sender Arguments
+
+*None*
+
+.. rubric:: Config
+
+.. code-block:: json
+   :linenos:
+
+   {
+     "devices": {
+       "alarm": {
+         "protocol": [ "secudo" ],
+         "id": [{
+           "id": 493
+         }],
+         "state": "alarm"
+       }
+     }
+   }
+
++------------------+-----------------+
+| **Option**       | **Value**       |
++------------------+-----------------+
+| id               | 0 - 1023        |
++------------------+-----------------+
+| state            | alarm           |
++------------------+-----------------+
+
+.. rubric:: Optional Settings
+
+*None*
+
+.. rubric:: Protocol
+
+This protocol sends 26 pulses like this:
+
+.. code-block:: console
+
+   314 314 628 628 314 314 628 314 628 628 314 314 628 314 628 314 628 314 628 628 314 628 314 314 628 10676
+
+The first pulse is the ``header`` and the last pulse is the ``footer``.
+These are meant to identify the pulses as genuine.
+We don't use them for further processing.
+The next step is to transform the remaining pulses into 12 groups of two pulses (and thereby dropping the ``header`` and ``footer`` pulses):
+
+.. code-block:: guess
+
+   314 628
+   628 314
+   314 628
+   314 628
+   628 314
+   314 628
+   314 628
+   314 628
+   314 628
+   628 314
+   628 314
+   314 628
+
+If we now look carefully at these groups you can distinguish two types of groups:
+
+#. 314 628
+#. 628 314
+
+So the first group is defined by a high 2nd and the second group by a high 1st pulse.
+So we take either of these two pulses to define a 0 or a 1.
+In this case we say a high 2nd pulse means a 1 and a low 2nd pulse means a 0.
+We then get the following output:
+
+.. code-block:: guess
+
+   101101111001
+
+The first 10 bits correspond to the setting of the ten dip switches inside the smoke sensor.
+If a dip switch is ON, this corresponds to 1 and 0 otherwise.
+The meaning of the two last bits is unknown.
+When reversing the first 10 bits because the first bits are least signifant we get the smoke sensors ID as binary number
+
+.. code-block:: guess
+
+   0111101101
+
+which is 493 as decimal number.
+This means that the 2nd, 5th and 10th dip switch is OFF and all others are ON.