Adding low_pulse (#1120)

* Adding low_pulse

main/ZactuatorONOFF.ino

@@ -44,7 +44,23 @@ void MQTTtoONOFF(char* topicOri, JsonObject& ONOFFdata) {
       // we acknowledge the sending by publishing the value to an acknowledgement topic
       pub(subjectGTWONOFFtoMQTT, ONOFFdata);
     } else {
-      Log.error(F("MQTTtoONOFF failed json read" CR));
+      if (ONOFFdata["cmd"] == "high_pulse") {
+        Log.notice(F("MQTTtoONOFF high_pulse ok" CR));
+        Log.notice(F("GPIO number: %d" CR), gpio);
+        pinMode(gpio, OUTPUT);
+        digitalWrite(gpio, HIGH);
+        delay(500);
+        digitalWrite(gpio, LOW);
+      } else if (ONOFFdata["cmd"] == "low_pulse") {
+        Log.notice(F("MQTTtoONOFF low_pulse ok" CR));
+        Log.notice(F("GPIO number: %d" CR), gpio);
+        pinMode(gpio, OUTPUT);
+        digitalWrite(gpio, LOW);
+        delay(500);
+        digitalWrite(gpio, HIGH);
+      } else {
+        Log.error(F("MQTTtoONOFF failed json read" CR));
+      }
     }
   }
 }

main/config_ONOFF.h

@@ -37,7 +37,7 @@ extern void MQTTtoONOFF(char* topicOri, JsonObject& RFdata);
 #define ONKey  "setON"
 #define OFFKey "setOFF"
 #ifndef ACTUATOR_ON
-#  define ACTUATOR_ON LOW // 0 or 1, set to the output level of the gpio pin to turn the actuator on.
+#  define ACTUATOR_ON LOW // LOW or HIGH, set to the output level of the gpio pin to turn the actuator on.
 #endif
 #ifndef ACTUATOR_ONOFF_DEFAULT
 #  define ACTUATOR_ONOFF_DEFAULT !ACTUATOR_ON // ACTUATOR_ON or !ACTUATOR_ON, set to the state desired on reset.