diff --git a/docs/use/rf.md b/docs/use/rf.md
index b8442a9..e79f5e8 100644
--- a/docs/use/rf.md
+++ b/docs/use/rf.md
@@ -122,6 +122,29 @@ Generate your RF signals by pressing a remote button or other and you will see :
 
 ![](../img/OpenMQTTGateway_Pilight_Digoo-DG-R8S.png)
 
+### Limit Protocols
+It is possible to limit the protocols that Pilight will respond to, this can help reduce noise from unwanted devices and in some cases disable conflicting protocols.
+
+#### Available protocols
+To list the available protocols on the Serial - 
+
+`mosquitto_pub -t "home/OpenMQTTGateway/commands/MQTTtoPilight/protocols" -m '{"available":true}'`
+#### Limit protocols
+To limit the protocols, send a JSON array of protocols as below - 
+
+`mosquitto_pub -t "home/OpenMQTTGateway/commands/MQTTtoPilight/protocols -m '{"limit": ["array", "of", "protocols"]}'`
+
+eg: `mosquitto_pub -t "home/OpenMQTTGateway/commands/MQTTtoPilight/protocols" -m '{"limit":["tfa", "ev1527"}'`
+
+#### Reset protocols
+To reset and listen to all protocols -
+`mosquitto_pub -t "home/OpenMQTTGateway/commands/MQTTtoPilight/protocols -m '{"reset": true}`'
+
+#### Enabled protocols
+To list the enabled protocols on the Serial - 
+
+`mosquitto_pub -t "home/OpenMQTTGateway/commands/MQTTtoPilight/protocols" -m '{"enabled":true}'`
+
 ### Send data by MQTT to transmit a RF signal
 
 #### Using a known protocol
diff --git a/main/ZgatewayPilight.ino b/main/ZgatewayPilight.ino
index 23449d7..6c01a5a 100644
--- a/main/ZgatewayPilight.ino
+++ b/main/ZgatewayPilight.ino
@@ -93,12 +93,78 @@ void setupPilight() {
   Log.trace(F("ZgatewayPilight setup done " CR));
 }
 
+void savePilightConfig() {
+  Log.trace(F("saving Pilight config" CR));
+  DynamicJsonDocument json(4096);
+  deserializeJson(json, rf.enabledProtocols());
+
+  File configFile = SPIFFS.open("/pilight.json", "w");
+  if (!configFile) {
+    Log.error(F("failed to open config file for writing" CR));
+  }
+
+  serializeJsonPretty(json, Serial);
+  serializeJson(json, configFile);
+  configFile.close();
+}
+
+void loadPilightConfig() {
+  Log.trace(F("reading Pilight config file" CR));
+  File configFile = SPIFFS.open("/pilight.json", "r");
+  if (configFile) {
+    Log.trace(F("opened Pilight config file" CR));
+    DynamicJsonDocument json(configFile.size() * 4);
+    auto error = deserializeJson(json, configFile);
+    if (error) {
+      Log.error(F("deserialize config failed: %s, buffer capacity: %u" CR), error.c_str(), json.capacity());
+    }
+    serializeJson(json, Serial);
+    if (!json.isNull()) {
+      String rflimit;
+      serializeJson(json, rflimit);
+      rf.limitProtocols(rflimit);
+    } else {
+      Log.warning(F("failed to load json config" CR));
+    }
+    configFile.close();
+  }
+}
+
 void PilighttoMQTT() {
   rf.loop();
 }
 
 void MQTTtoPilight(char* topicOri, JsonObject& Pilightdata) {
-  if (cmpToMainTopic(topicOri, subjectMQTTtoPilight)) {
+  if (cmpToMainTopic(topicOri, subjectMQTTtoPilightProtocol)) {
+    bool success = false;
+    if (Pilightdata.containsKey("reset")) {
+      rf.limitProtocols(rf.availableProtocols());
+      savePilightConfig();
+      success = true;
+    }
+    if (Pilightdata.containsKey("limit")) {
+      String output;
+      serializeJson(Pilightdata["limit"], output);
+      rf.limitProtocols(output);
+      savePilightConfig();
+      success = true;
+    }
+    if (Pilightdata.containsKey("enabled")) {
+      Log.notice(F("PiLight protocols enabled: %s" CR), rf.enabledProtocols().c_str());
+      success = true;
+    }
+    if (Pilightdata.containsKey("available")) {
+      Log.notice(F("PiLight protocols available: %s" CR), rf.availableProtocols().c_str());
+      success = true;
+    }
+
+    if (success) {
+      pub(subjectGTWPilighttoMQTT, Pilightdata); // we acknowledge the sending by publishing the value to an acknowledgement topic, for the moment even if it is a signal repetition we acknowledge also
+    } else {
+      pub(subjectGTWPilighttoMQTT, "{\"Status\": \"Error\"}"); // Fail feedback
+      Log.error(F("MQTTtoPilightProtocol Fail json" CR));
+    }
+  } else if (cmpToMainTopic(topicOri, subjectMQTTtoPilight)) {
     const char* message = Pilightdata["message"];
     const char* protocol = Pilightdata["protocol"];
     const char* raw = Pilightdata["raw"];
@@ -227,5 +293,6 @@ extern void enablePilightReceive() {
   rf.initReceiver(RF_RECEIVER_GPIO);
   pinMode(RF_EMITTER_GPIO, OUTPUT); // Set this here, because if this is the RX pin it was reset to INPUT by Serial.end();
   rf.enableReceiver();
+  loadPilightConfig();
 };
 #endif
diff --git a/main/config_RF.h b/main/config_RF.h
index ec8032b..4e4302d 100644
--- a/main/config_RF.h
+++ b/main/config_RF.h
@@ -101,10 +101,11 @@ int minimumRssi = 0;
 
 /*-------------------ESPPiLight topics & parameters----------------------*/
 //433Mhz Pilight MQTT Subjects and keys
-#define subjectMQTTtoPilight    "/commands/MQTTtoPilight"
-#define subjectPilighttoMQTT    "/PilighttoMQTT"
-#define subjectGTWPilighttoMQTT "/PilighttoMQTT"
-#define repeatPilightwMQTT      false // do we repeat a received signal by using mqtt with Pilight gateway
+#define subjectMQTTtoPilight         "/commands/MQTTtoPilight"
+#define subjectMQTTtoPilightProtocol "/commands/MQTTtoPilight/protocols"
+#define subjectPilighttoMQTT         "/PilighttoMQTT"
+#define subjectGTWPilighttoMQTT      "/PilighttoMQTT"
+#define repeatPilightwMQTT           false // do we repeat a received signal by using mqtt with Pilight gateway
 
 /*-------------------RTL_433 topics & parameters----------------------*/
 //433Mhz RTL_433 MQTT Subjects and keys