[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

* Update arduino core to 3.1.1

* Fix Blufi build

* Update arduinojson, fix build errors with idf

* Fix narrowing

* fix RF builds

* WIP-Convert ino files to cpp

* Fix pilight build

* Fix Somfy actuator build.

* Update esp32dev-rf partition

* Fix Weatherstation build

* Fix GFSunInverter build

* Fix esp32dev-ir build

* Fix ble-aws build

* Fix eth builds

* Fix m5Stack missing pins_arduino.h

* Fix build errors for M5 stack/tough, others are upstream issues.

* Fix RTL 433 build - remaining errors are from radolib

* Fix nodemcu build

* fix 2g builds

* Fix serial build

* Fix actuator on off builds

* Fix SSD1306 build - remaining errors are from radiolib

* Fix multiple definition of OTAserver_cert

* Fix nodemcu rf2 build

* Fix ADC builds

* Fix sensor builds

* Fix LORA builds

* Fix multi-receiver builds - remaining errors are in radiolib

* Fix fastled builds

* Fix theegns board builds

* Fix broker builds

* Update fastled - old version failed all-test build

* Fix RN8209 builds

* Fix max temp actuator builds

* Fix PWM builds

* Fix C37 sensor builds

* Fix HTU21 builds

* Fix INA266 builds

* Fix undefined variables in mqtt discovery

* Fix webui build

* Fix fastled invalid pin error

* Fix wifi manual setup builds

* Fix onewire/all-test build - bin too big error remaining

* Fix theengs plug build

* Fix rfbridge builds

* Fix blufi builds

* Fix undefined functions in serial

* Fix preprocessor definition checks

* Set IDF log level to erre

* Add delay in loop to prevent watchdog timeout

* Use xTaskCreateUniveral to support single core processors

* Remove old HTTPUpdate files - upsteam fixed.

* Cleanup and move common declarations to header file

* Use custom partiton table to fix builds where bin is too large

* Update M5StickC - fixs esp32-m5stick-c-ble build

* Revert to Arduino core 2.x for builds with incompatible libs

* Remove "Z" from file names and rename omg_common to TheengsCommon

* Fix gateway name when using MAC with new Arduino core

* Update IDF config to reduce loop task stack use

* Update esp-nimble-cpp version, corrects BLE uppercase ID's

* Update wifi manager to fix watchdog timeout error

.gitignore

@@ -15,4 +15,5 @@ dependencies.lock
 sdkconfig.*
 !sdkconfig.defaults
 __pycache__
-*.pem
+*.pem
+managed_components

environments.ini

@@ -188,7 +188,7 @@ custom_hardware = Theengs Plug
 platform = ${com.esp32_platform}
 board = esp32dev
 extra_scripts = ${com-esp32.extra_scripts}
-board_build.partitions = min_spiffs.csv
+board_build.partitions = partitions/no_coredump.csv
 lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.ble}
@@ -270,6 +270,7 @@ build_flags =
 [env:esp32dev-rf]
 platform = ${com.esp32_platform}
 board = esp32dev
+board_build.partitions = min_spiffs.csv
 lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.rc-switch}
@@ -311,6 +312,7 @@ custom_description = Gateway using ESPilight library only, need CC1101
 [env:esp32dev-somfy-cc1101]
 platform = ${com.esp32_platform}
 board = esp32dev
+board_build.partitions = min_spiffs.csv
 lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.somfy_remote}
@@ -342,6 +344,7 @@ custom_description = Gateway using Somfy Remote and ESPilight library, need CC11
 [env:esp32dev-weatherstation]
 platform = ${com.esp32_platform}
 board = esp32dev
+board_build.partitions = min_spiffs.csv
 lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.rfWeatherStation}
@@ -354,6 +357,7 @@ custom_description = Gateway to retrieve weather station data Ventus W174/W132 (
 [env:esp32dev-gf-sun-inverter]
 platform = ${com.esp32_platform}
 board = esp32dev
+board_build.partitions = min_spiffs.csv
 lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.emodbus}
@@ -598,10 +602,10 @@ custom_description = BLE gateway using wifi
 custom_hardware = OLIMEX ESP32 Gateway
 
 [env:esp32-m5stick-ble]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = m5stack-core-esp32
 extra_scripts = ${com-esp32.extra_scripts}
-board_build.partitions = min_spiffs.csv
+board_build.partitions = partitions/no_coredump.csv
 lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.ble}
@@ -622,7 +626,7 @@ custom_description = Expandable module with BLE gateway, display, and little IR
 custom_hardware = M5Stick Grey
 
 [env:esp32-m5stack-ble]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = m5stack-core-esp32
 extra_scripts = ${com-esp32.extra_scripts}
 board_build.partitions = min_spiffs.csv
@@ -647,7 +651,7 @@ custom_description = Expandable module with BLE gateway and display
 custom_hardware = M5Stack Core
 
 [env:esp32-m5tough-ble]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = m5stack-core-esp32
 extra_scripts = ${com-esp32.extra_scripts}
 board_build.partitions = min_spiffs.csv
@@ -666,7 +670,7 @@ custom_description = Expandable module with BLE gateway and display, suitable fo
 custom_hardware = M5Tough rugged
 
 [env:esp32-m5stick-c-ble]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = m5stick-c
 extra_scripts = ${com-esp32.extra_scripts}
 board_build.partitions = min_spiffs.csv
@@ -697,10 +701,10 @@ custom_description = Expandable module with BLE gateway, display, and little IR
 custom_hardware = M5Stick C
 
 [env:esp32-m5stick-cp-ble]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = pico32
 extra_scripts = ${com-esp32.extra_scripts}
-board_build.partitions = min_spiffs.csv
+board_build.partitions = partitions/no_coredump.csv
 lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.ble}
@@ -731,7 +735,7 @@ custom_hardware = M5Stick CP
 platform = ${com.esp32_platform}
 board = pico32
 extra_scripts = ${com-esp32.extra_scripts}
-board_build.partitions = min_spiffs.csv
+board_build.partitions = partitions/no_coredump.csv
 lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.ble}
@@ -762,7 +766,7 @@ custom_hardware = M5 ATOM Matrix
 platform = ${com.esp32_platform}
 board = pico32
 extra_scripts = ${com-esp32.extra_scripts}
-board_build.partitions = min_spiffs.csv
+board_build.partitions = partitions/no_coredump.csv
 lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.ble}
@@ -785,7 +789,7 @@ custom_description = Compact enclosure ESP32 with BLE gateway
 custom_hardware = M5 ATOM Lite
 
 [env:esp32doitv1-aithinker-r01-sx1278]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = esp32doit-devkit-v1
 board_build.partitions = min_spiffs.csv
 lib_deps =
@@ -864,7 +868,7 @@ upload_flags =
   --port=8266
 
 [env:esp32dev-rtl_433]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = esp32dev
 board_build.partitions = min_spiffs.csv
 lib_deps =
@@ -904,7 +908,7 @@ build_flags =
 custom_description = Gateway using RTL_433_ESP library, need CC1101
 
 [env:heltec-rtl_433]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = heltec_wifi_lora_32_V2
 ; ~/.platformio/packages/framework-arduinoespressif32/variants/.../pins_arduino.h
 board_build.partitions = min_spiffs.csv
@@ -933,7 +937,7 @@ custom_description = Gateway using RTL_433_ESP and RadioLib
 custom_hardware = ESP32 HELTEC LORA32 V2
 
 [env:heltec-rtl_433-fsk]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = heltec_wifi_lora_32_V2
 ; ~/.platformio/packages/framework-arduinoespressif32/variants/.../pins_arduino.h
 board_build.partitions = min_spiffs.csv
@@ -991,7 +995,7 @@ custom_description = Heltec BLE gateway with adaptive scanning activated, automa
 custom_hardware = ESP32 HELTEC LORA32 V2
 
 [env:lilygo-rtl_433]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = ttgo-lora32-v21
 ; ~/.platformio/packages/framework-arduinoespressif32/variants/.../pins_arduino.h
 board_build.partitions = min_spiffs.csv
@@ -1020,7 +1024,7 @@ custom_description = For ESP32, Gateway using RTL_433_ESP and RadioLib
 custom_hardware = ESP32 LILYGO LoRa32 V2.1
 
 [env:lilygo-rtl_433-fsk]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = ttgo-lora32-v21
 ; ~/.platformio/packages/framework-arduinoespressif32/variants/.../pins_arduino.h
 board_build.partitions = min_spiffs.csv
@@ -1078,7 +1082,7 @@ custom_description = LilyGo BLE gateway with adaptive scanning activated, automa
 custom_hardware = ESP32 LILYGO LoRa32 V2.1
 
 [env:esp32dev-multi_receiver]
-platform = ${com.esp32_platform}
+platform = espressif32@6.1.0
 board = esp32dev
 board_build.partitions = min_spiffs.csv
 lib_deps =
@@ -1896,11 +1900,16 @@ framework = arduino, espidf
 board = esp32dev
 extra_scripts = ${com-esp32.extra_scripts}
 board_build.partitions = partitions/min_spiffs.csv
+board_build.embed_txtfiles =
+    managed_components/espressif__esp_insights/server_certs/https_server.crt
+    managed_components/espressif__esp_rainmaker/server_certs/rmaker_mqtt_server.crt
+    managed_components/espressif__esp_rainmaker/server_certs/rmaker_claim_service_server.crt
+    managed_components/espressif__esp_rainmaker/server_certs/rmaker_ota_server.crt
 lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.decoder}
-  h2zero/esp-nimble-cpp@2.0.1
+  h2zero/esp-nimble-cpp@2.1.1
-  h2zero/NimBLEOta@0.1.0
+  h2zero/NimBLEOta@0.2.0
 build_flags =
   ${com-esp32.build_flags}
   '-DZgatewayBT="BT"'
@@ -1909,5 +1918,4 @@ build_flags =
   '-DGateway_Name="OMG_ESP32_BLE"'
   '-DUSE_BLUFI=1'
   '-DenableMultiGTWSync=false'
-  '-DCONFIG_NIMBLE_CPP_FREERTOS_TASK_BLOCK_BIT=31'
 custom_description = Regular BLE gateway based on esp-idf with adaptive scanning activated, automatically adapts the scan parameters depending on your devices

main/TheengsCommon.h

@@ -0,0 +1,100 @@
+#pragma once
+
+#include "User_config.h"
+
+#define ARDUINOJSON_USE_LONG_LONG     1
+#define ARDUINOJSON_ENABLE_STD_STRING 1
+#include <ArduinoJson.h>
+#include <ArduinoLog.h>
+
+#if defined(ESP32)
+#  include <Preferences.h>
+extern Preferences preferences;
+#endif
+
+// Flags definition for white list, black list, discovery management
+#define device_flags_init     0 << 0
+#define device_flags_isDisc   1 << 0
+#define device_flags_isWhiteL 1 << 1
+#define device_flags_isBlackL 1 << 2
+#define device_flags_connect  1 << 3
+#define isWhite(device)       device->isWhtL
+#define isBlack(device)       device->isBlkL
+#define isDiscovered(device)  device->isDisc
+
+enum GatewayState {
+  WAITING_ONBOARDING,
+  ONBOARDING,
+  OFFLINE,
+  NTWK_CONNECTED,
+  BROKER_CONNECTED,
+  PROCESSING,
+  NTWK_DISCONNECTED,
+  BROKER_DISCONNECTED,
+  LOCAL_OTA_IN_PROGRESS,
+  REMOTE_OTA_IN_PROGRESS,
+  SLEEPING,
+  ERROR
+};
+
+enum PowerMode {
+  DEACTIVATED = -1,
+  ALWAYS_ON,
+  INTERVAL,
+  ACTION
+};
+
+struct SYSConfig_s {
+  bool mqtt; // if true the gateway will publish the received data on the MQTT broker
+  bool serial; // if true the gateway will publish the received data on the SERIAL
+  bool blufi; // if true the gateway will be accesible with blufi
+  bool offline;
+  bool discovery; // HA discovery convention
+#ifdef LED_ADDRESSABLE
+  int rgbbrightness; // brightness of the RGB LED
+#endif
+  enum PowerMode powerMode;
+};
+
+extern GatewayState gatewayState;
+extern SYSConfig_s SYSConfig;
+extern bool ready_to_sleep;
+extern char mqtt_topic[];
+extern char gateway_name[];
+extern unsigned long lastDiscovery; // Time of the last discovery to trigger automaticaly to off after DiscoveryAutoOffTimer
+
+extern bool enqueueJsonObject(const StaticJsonDocument<JSON_MSG_BUFFER>& jsonDoc, int timeout);
+extern bool enqueueJsonObject(const StaticJsonDocument<JSON_MSG_BUFFER>& jsonDoc);
+extern void buildTopicFromId(JsonObject& Jsondata, const char* origin);
+extern bool pubMQTT(const char* topic, const char* payload);
+extern bool pubMQTT(const char* topic, const char* payload, bool retainFlag);
+extern bool pubMQTT(String topic, const char* payload);
+extern bool pubMQTT(const char* topic, unsigned long payload);
+extern bool pubMQTT(const char* topic, unsigned long long payload);
+extern bool pubMQTT(const char* topic, String payload);
+extern bool pubMQTT(String topic, String payload);
+extern bool pubMQTT(String topic, int payload);
+extern bool pubMQTT(String topic, unsigned long long payload);
+extern bool pubMQTT(String topic, float payload);
+extern bool pubMQTT(const char* topic, float payload);
+extern bool pubMQTT(const char* topic, int payload);
+extern bool pubMQTT(const char* topic, unsigned int payload);
+extern bool pubMQTT(const char* topic, long payload);
+extern bool pubMQTT(const char* topic, double payload);
+extern bool pubMQTT(String topic, unsigned long payload);
+extern unsigned long uptime();
+extern bool cmpToMainTopic(const char*, const char*);
+extern bool pub(const char*, const char*, bool);
+extern bool pub(const char*, const char*);
+
+template <typename T>
+void Config_update(JsonObject& data, const char* key, T& var) {
+  if (data.containsKey(key)) {
+    if (var != data[key].as<T>()) {
+      var = data[key].as<T>();
+      Log.notice(F("Config %s changed to: %T" CR), key, data[key].as<T>());
+    } else {
+      Log.notice(F("Config %s unchanged, currently: %T" CR), key, data[key].as<T>());
+    }
+  }
+}

main/User_config.h

@@ -226,7 +226,8 @@
 
 #if AWS_IOT
 // Enable the use of ALPN for AWS IoT Core with the port 443
-const char* alpnProtocols[] = {"x-amzn-mqtt-ca", NULL};
+#  define ALPN_PROTOCOLS \
+    { "x-amzn-mqtt-ca", NULL }
 #endif
 
 //#  define MQTT_HTTPS_FW_UPDATE //uncomment to enable updating via MQTT message.
@@ -251,7 +252,7 @@ const char* alpnProtocols[] = {"x-amzn-mqtt-ca", NULL};
 #  define RELEASE_LINK_DEV "https://ota.openmqttgateway.com/binaries/dev/"
 #  define RELEASE_LINK     "https://ota.openmqttgateway.com/binaries/"
 #else
-const char* OTAserver_cert = "";
+static const char* OTAserver_cert = "";
 #endif
 
 #ifndef MQTT_SECURE_SIGNED_CLIENT
@@ -289,12 +290,15 @@ struct ss_cnt_parameters {
   bool validConnection;
 };
 
+#  define CNT_PARAMS_ARR                                                                                                                                                     \
+    {                                                                                                                                                                        \
+      {ss_server_cert, ss_client_cert, ss_client_key, OTAserver_cert, MQTT_SERVER, MQTT_PORT, MQTT_USER, MQTT_PASS, MQTT_SECURE_DEFAULT, MQTT_CERT_VALIDATE_DEFAULT, false}, \
+          {"", "", "", "", MQTT_SERVER, MQTT_PORT, MQTT_USER, MQTT_PASS, MQTT_SECURE_DEFAULT, MQTT_CERT_VALIDATE_DEFAULT, false},                                            \
+      { "", "", "", "", MQTT_SERVER, MQTT_PORT, MQTT_USER, MQTT_PASS, MQTT_SECURE_DEFAULT, MQTT_CERT_VALIDATE_DEFAULT, false }                                               \
+    }
 #  define cnt_parameters_array_size 3
 
-ss_cnt_parameters cnt_parameters_array[cnt_parameters_array_size] = {
+extern ss_cnt_parameters cnt_parameters_array[];
-    {ss_server_cert, ss_client_cert, ss_client_key, OTAserver_cert, MQTT_SERVER, MQTT_PORT, MQTT_USER, MQTT_PASS, MQTT_SECURE_DEFAULT, MQTT_CERT_VALIDATE_DEFAULT, false},
-    {"", "", "", "", MQTT_SERVER, MQTT_PORT, MQTT_USER, MQTT_PASS, MQTT_SECURE_DEFAULT, MQTT_CERT_VALIDATE_DEFAULT, false},
-    {"", "", "", "", MQTT_SERVER, MQTT_PORT, MQTT_USER, MQTT_PASS, MQTT_SECURE_DEFAULT, MQTT_CERT_VALIDATE_DEFAULT, false}};
 #endif
 
 #define MIN_CERT_LENGTH 200 // Minimum length of a certificate to be considered valid
@@ -527,7 +531,7 @@ ss_cnt_parameters cnt_parameters_array[cnt_parameters_array_size] = {
 
 #ifdef ESP8266
 //#  define TRIGGER_GPIO 14 // pin D5 as full reset button (long press >10s)
-#elif ESP32
+#elif defined(ESP32)
 //#  define TRIGGER_GPIO 0 // boot button as full reset button (long press >10s)
 //#  define NO_INT_TEMP_READING true //Define if we don't want internal temperature reading for the ESP32
 #endif
@@ -621,60 +625,14 @@ ss_cnt_parameters cnt_parameters_array[cnt_parameters_array_size] = {
 #define displayPrint(...)   // only print if not in low power mode
 #define lpDisplayPrint(...) // print in low power mode
 
-/*----------- SHARED WITH OMG MODULES --------------*/
-
-char mqtt_topic[parameters_size + 1] = Base_Topic;
-char gateway_name[parameters_size + 1] = Gateway_Name;
-
-void connectMQTT();
-
-unsigned long uptime();
-bool cmpToMainTopic(const char*, const char*);
-bool pub(const char*, const char*, bool);
-bool pub(const char*, const char*);
-
-#if defined(ESP32)
-#  include <Preferences.h>
-Preferences preferences;
-#endif
-
-unsigned long lastDiscovery = 0; // Time of the last discovery to trigger automaticaly to off after DiscoveryAutoOffTimer
-#ifndef DEFAULT_DISCOVERY
-#  define DEFAULT_DISCOVERY true
-#endif
-
-#include <vector>
-// Flags definition for white list, black list, discovery management
-#define device_flags_init     0 << 0
-#define device_flags_isDisc   1 << 0
-#define device_flags_isWhiteL 1 << 1
-#define device_flags_isBlackL 1 << 2
-#define device_flags_connect  1 << 3
-#define isWhite(device)       device->isWhtL
-#define isBlack(device)       device->isBlkL
-#define isDiscovered(device)  device->isDisc
-
-enum PowerMode { DEACTIVATED = -1,
-                 ALWAYS_ON,
-                 INTERVAL,
-                 ACTION };
-
 /*--------------------Minimum freeHeap--------------------*/
 // Below this parameter we trigger a restart, this avoid stuck boards like seen in https://github.com/1technophile/OpenMQTTGateway/issues/1693
 #define MinimumMemory 40000
 
 /*----------------CONFIGURABLE PARAMETERS-----------------*/
-struct SYSConfig_s {
+#ifndef DEFAULT_DISCOVERY
-  bool mqtt; // if true the gateway will publish the received data on the MQTT broker
+#  define DEFAULT_DISCOVERY true
-  bool serial; // if true the gateway will publish the received data on the SERIAL
-  bool blufi; // if true the gateway will be accesible with blufi
-  bool offline;
-  bool discovery; // HA discovery convention
-#ifdef LED_ADDRESSABLE
-  int rgbbrightness; // brightness of the RGB LED
 #endif
-  enum PowerMode powerMode;
-};
 
 #ifndef DEFAULT_MQTT
 #  define DEFAULT_MQTT true
@@ -697,4 +655,8 @@ void storeSignalValue(uint64_t);
 #define convertTemp_CtoF(c) ((c * 1.8) + 32)
 #define convertTemp_FtoC(f) ((f - 32) * 5 / 9)
 
+#ifndef QueueSize
+#  define QueueSize 18
+#endif
+
 #endif

main/actuatorFASTLED.cpp

@@ -26,6 +26,8 @@
 
 #  include <FastLED.h>
 
+#  include "config_FASTLED.h"
+
 enum LEDState {
   OFF,
   FIRE,
@@ -41,10 +43,12 @@ const long blinkInterval = 300;
 const long fireUpdate = 10;
 CRGBPalette16 gPal;
 
+void Fire2012WithPalette();
+
 void setupFASTLED() {
   Log.notice(F("FASTLED_DATA_GPIO: %d" CR), FASTLED_DATA_GPIO);
   Log.notice(F("FASTLED_NUM_LEDS: %d" CR), FASTLED_NUM_LEDS);
-  Log.trace(F("ZactuatorFASTLED setup done " CR));
+  Log.trace(F("actuatorFASTLED setup done " CR));
   FastLED.addLeds<FASTLED_TYPE, FASTLED_DATA_GPIO>(leds, FASTLED_NUM_LEDS);
 }
 

main/actuatorONOFF.cpp

@@ -30,7 +30,15 @@
 
 #ifdef ZactuatorONOFF
 
+#  include "LEDManager.h"
+#  include "TheengsCommon.h"
+#  include "config_ONOFF.h"
+
+extern LEDManager ledManager;
+extern void ActuatorTrigger();
+
 #  ifdef ESP32
+
 // Global struct to store live ONOFF configuration data
 ONOFFConfig_s ONOFFConfig;
 
@@ -94,9 +102,9 @@ void ONOFFConfig_load() {
   }
 }
 #  else
-void ONOFFConfig_init(){};
+void ONOFFConfig_init() {};
-void ONOFFConfig_fromJson(JsonObject& ONOFFdata){};
+void ONOFFConfig_fromJson(JsonObject& ONOFFdata) {};
-void ONOFFConfig_load(){};
+void ONOFFConfig_load() {};
 #  endif
 
 void updatePowerIndicator() {
@@ -109,6 +117,33 @@ void updatePowerIndicator() {
 #  endif
 }
 
+//Check regularly temperature of the ESP32 board and switch OFF the relay if temperature is more than MAX_TEMP_ACTUATOR
+#  ifdef MAX_TEMP_ACTUATOR
+extern float intTemperatureRead();
+
+void overLimitTemp(void* pvParameters) {
+#    if defined(ESP32) && !defined(NO_INT_TEMP_READING)
+  for (;;) {
+    static float previousInternalTempc = 0;
+    float internalTempc = intTemperatureRead();
+    Log.trace(F("Internal temperature of the ESP32 %F" CR), internalTempc);
+    // We switch OFF the actuator if the temperature of the ESP32 is more than MAX_TEMP_ACTUATOR two consecutive times, so as to avoid false single readings to trigger the relay OFF.
+    if (internalTempc > MAX_TEMP_ACTUATOR && previousInternalTempc > MAX_TEMP_ACTUATOR) {
+      if (digitalRead(ACTUATOR_ONOFF_GPIO) == ACTUATOR_ON) { // This could be with the previous condition, but it is better to trigger the digitalRead only if the previous condition is met to avoid the digitalRead
+        Log.error(F("[ActuatorONOFF] OverTemperature detected ( %F > %F ) switching OFF Actuator" CR), internalTempc, MAX_TEMP_ACTUATOR);
+        ActuatorTrigger();
+#      ifdef LED_ACTUATOR_ONOFF
+        ledManager.setMode(LED_ACTUATOR_ONOFF, 0, LEDManager::Mode::STATIC, LED_ERROR_COLOR, -1);
+#      endif
+      }
+    }
+    previousInternalTempc = internalTempc;
+    vTaskDelay(TimeBetweenReadingIntTemp);
+  }
+#    endif
+}
+#  endif
+
 void setupONOFF() {
 #  ifdef MAX_TEMP_ACTUATOR
   xTaskCreate(overLimitTemp, "overLimitTemp", 4000, NULL, 10, NULL);
@@ -130,7 +165,7 @@ void setupONOFF() {
   }
 #  endif
   updatePowerIndicator();
-  Log.trace(F("ZactuatorONOFF setup done" CR));
+  Log.trace(F("actuatorONOFF setup done" CR));
 }
 
 #  if jsonReceiving
@@ -239,31 +274,6 @@ void XtoONOFF(const char* topicOri, const char* datacallback) {
 }
 #  endif
 
-//Check regularly temperature of the ESP32 board and switch OFF the relay if temperature is more than MAX_TEMP_ACTUATOR
-#  ifdef MAX_TEMP_ACTUATOR
-void overLimitTemp(void* pvParameters) {
-#    if defined(ESP32) && !defined(NO_INT_TEMP_READING)
-  for (;;) {
-    static float previousInternalTempc = 0;
-    float internalTempc = intTemperatureRead();
-    Log.trace(F("Internal temperature of the ESP32 %F" CR), internalTempc);
-    // We switch OFF the actuator if the temperature of the ESP32 is more than MAX_TEMP_ACTUATOR two consecutive times, so as to avoid false single readings to trigger the relay OFF.
-    if (internalTempc > MAX_TEMP_ACTUATOR && previousInternalTempc > MAX_TEMP_ACTUATOR) {
-      if (digitalRead(ACTUATOR_ONOFF_GPIO) == ACTUATOR_ON) { // This could be with the previous condition, but it is better to trigger the digitalRead only if the previous condition is met to avoid the digitalRead
-        Log.error(F("[ActuatorONOFF] OverTemperature detected ( %F > %F ) switching OFF Actuator" CR), internalTempc, MAX_TEMP_ACTUATOR);
-        ActuatorTrigger();
-#      ifdef LED_ACTUATOR_ONOFF
-        ledManager.setMode(LED_ACTUATOR_ONOFF, 0, LEDManager::Mode::STATIC, LED_ERROR_COLOR, -1);
-#      endif
-      }
-    }
-    previousInternalTempc = internalTempc;
-    vTaskDelay(TimeBetweenReadingIntTemp);
-  }
-#    endif
-}
-#  endif
-
 // Check regularly current the relay and switch it OFF if the current is more than MAX_CURRENT_ACTUATOR
 #  ifdef MAX_CURRENT_ACTUATOR
 void overLimitCurrent(float RN8209current) {

main/actuatorPWM.cpp

@@ -68,7 +68,7 @@
 #include "User_config.h"
 
 #ifdef ZactuatorPWM
-
+#  include "TheengsCommon.h"
 #  include "config_PWM.h"
 
 static long previousUpdateTime = 0; // milliseconds
@@ -128,15 +128,14 @@ void setupPWM() {
     // Configure the pin for PWM output.
     // I think this is the fastest frequency that allows for a 16-bit
     // duty cycle on an ESP32
-    ledcSetup(i, 625.0, kNumDutyCycleBits);
+    ledcAttachChannel(channelPins[i], 625.0, kNumDutyCycleBits, i);
-    ledcAttachPin(channelPins[i], i);
 #  endif
     calibrationMinLinear[i] = 0.f;
     calibrationMaxLinear[i] = 1.f;
     calibrationGamma[i] = PWM_DEFAULT_GAMMA;
   }
 
-  Log.trace(F("ZactuatorPWM setup done " CR));
+  Log.trace(F("actuatorPWM setup done " CR));
 }
 
 // This applies a power curve to the input to try to make the inputs

main/actuatorSomfy.cpp

@@ -1,15 +1,15 @@
-/*  
+/*
   Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
-   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker 
+   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
    Send and receiving command by MQTT
- 
+
   This actor enables to:
  - receive MQTT data from a topic and send Somfy RTS remote control signals corresponding to the received MQTT data
-  
+
     Copyright (C) 2020 Leon Kiefer
 
     This file is part of OpenMQTTGateway.
-    
+
     OpenMQTTGateway is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation, either version 3 of the License, or
@@ -24,15 +24,21 @@
 #include "User_config.h"
 
 #ifdef ZactuatorSomfy
-
 #  include <EEPROM.h>
 #  include <EEPROMRollingCodeStorage.h>
 #  include <SomfyRemote.h>
 
+#  include "config_RF.h"
+#  include "config_Somfy.h"
 #  ifdef ZradioCC1101
 #    include <ELECHOUSE_CC1101_SRC_DRV.h>
 #  endif
 
+void disableCurrentReceiver();
+void enableActiveReceiver();
+void initCC1101();
+void setupSomfy();
+
 void setupSomfy() {
   pinMode(RF_EMITTER_GPIO, OUTPUT);
   digitalWrite(RF_EMITTER_GPIO, LOW);
@@ -45,7 +51,7 @@ void setupSomfy() {
   EEPROM.begin(max(4, SOMFY_REMOTE_NUM * 2));
 #  endif
 
-  Log.trace(F("ZactuatorSomfy setup done " CR));
+  Log.trace(F("actuatorSomfy setup done " CR));
 }
 
 #  if jsonReceiving
@@ -61,7 +67,7 @@ void XtoSomfy(const char* topicOri, JsonObject& jsonData) {
 
     const int remoteIndex = jsonData["remote"];
     if (remoteIndex >= SOMFY_REMOTE_NUM) {
-      Log.warning(F("ZactuatorSomfy remote does not exist" CR));
+      Log.warning(F("actuatorSomfy remote does not exist" CR));
       return;
     }
     const String commandData = jsonData["command"];

main/blufi.cpp

@@ -26,15 +26,23 @@
     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #if defined(ESP32) && defined(USE_BLUFI)
+#  include <PicoMQTT.h>
+#  include <WiFiManager.h>
+
 #  include "NimBLEDevice.h"
 #  include "NimBLEOta.h"
+#  include "TheengsCommon.h"
+#  include "User_config.h"
 #  include "esp_blufi_api.h"
+#  include "esp_mac.h"
 #  include "esp_timer.h"
 
 extern "C" {
 #  include "esp_blufi.h"
 }
 
+extern void receivingDATA(const char* topicOri, const char* datacallback);
+
 static esp_timer_handle_t connection_timer = nullptr;
 static NimBLEOta* pNimBLEOta;
 static NimBLECharacteristic* pCommandCharacteristic;
@@ -62,6 +70,10 @@ static uint8_t gl_sta_passwd[64];
 static int gl_sta_ssid_len;
 static bool gl_sta_is_connecting = false;
 static esp_blufi_extra_info_t gl_sta_conn_info;
+extern bool ethConnected;
+extern bool mqttSetupPending;
+extern std::unique_ptr<PicoMQTT::Client> mqtt;
+extern WiFiManager wifiManager;
 
 static void example_event_callback(esp_blufi_cb_event_t event, esp_blufi_cb_param_t* param);
 void wifi_event_handler(arduino_event_id_t event);
@@ -93,7 +105,7 @@ void receivingCommandTask(void* pvParameters) {
     Log.error(F("deserialize config failed: %s, buffer capacity: %u" CR), error.c_str(), json.capacity());
   } else {
     if (jsonBlufi.containsKey("target") && jsonBlufi["target"].is<char*>()) {
-      char topic[(parameters_size)*2 + jsonBlufi["target"].size() + 1];
+      char topic[(parameters_size) * 2 + jsonBlufi["target"].size() + 1];
       snprintf(topic, sizeof(topic), "%s%s%s", mqtt_topic, gateway_name, jsonBlufi["target"].as<const char*>());
       jsonBlufi.remove("target");
       char jsonStr[JSON_MSG_BUFFER_MAX];
@@ -105,7 +117,7 @@ void receivingCommandTask(void* pvParameters) {
         json["cnt_index"] = CNT_DEFAULT_INDEX;
         json["save_cnt"] = true;
       }
-      char topic[(parameters_size)*2 + strlen(subjectMQTTtoSYSset) + 1];
+      char topic[(parameters_size) * 2 + strlen(subjectMQTTtoSYSset) + 1];
       snprintf(topic, sizeof(topic), "%s%s%s", mqtt_topic, gateway_name, subjectMQTTtoSYSset);
       char jsonStr[JSON_MSG_BUFFER_MAX];
       serializeJson(jsonBlufi, jsonStr);
@@ -320,7 +332,7 @@ void wifi_event_handler(arduino_event_id_t event) {
       gl_sta_is_connecting = false;
       esp_blufi_extra_info_t info = {};
       const String current_ssid = WiFi.SSID();
-      gl_sta_ssid_len = std::min(current_ssid.length(), sizeof(gl_sta_ssid) - 1);
+      gl_sta_ssid_len = std::min<uint32_t>(current_ssid.length(), sizeof(gl_sta_ssid) - 1);
       std::copy_n(current_ssid.c_str(), gl_sta_ssid_len, gl_sta_ssid);
       gl_sta_ssid[gl_sta_ssid_len] = '\0';
       uint8_t* bssid = WiFi.BSSID();

main/blufiSec.cpp

@@ -6,8 +6,11 @@
 
 #if defined(ESP32) && defined(USE_BLUFI)
 
+#  include <ArduinoLog.h>
+
 #  include "esp_blufi_api.h"
 #  include "esp_crc.h"
+#  include "esp_random.h"
 #  include "mbedtls/aes.h"
 #  include "mbedtls/dhm.h"
 #  include "mbedtls/md5.h"
@@ -48,6 +51,12 @@ static int myrand(void* rng_state, unsigned char* output, size_t len) {
 extern "C" void btc_blufi_report_error(esp_blufi_error_state_t state);
 
 void blufi_dh_negotiate_data_handler(uint8_t* data, int len, uint8_t** output_data, int* output_len, bool* need_free) {
+  if (data == NULL || len < 3) {
+    Log.error(F("BLUFI Invalid data format" CR));
+    btc_blufi_report_error(ESP_BLUFI_DATA_FORMAT_ERROR);
+    return;
+  }
+
   int ret;
   uint8_t type = data[0];
 
@@ -66,6 +75,7 @@ void blufi_dh_negotiate_data_handler(uint8_t* data, int len, uint8_t** output_da
       }
       blufi_sec->dh_param = (uint8_t*)malloc(blufi_sec->dh_param_len);
       if (blufi_sec->dh_param == NULL) {
+        blufi_sec->dh_param_len = 0; /* Reset length to avoid using unallocated memory */
         btc_blufi_report_error(ESP_BLUFI_DH_MALLOC_ERROR);
         Log.error(F("%s, malloc failed\n" CR), __func__);
         return;
@@ -77,6 +87,13 @@ void blufi_dh_negotiate_data_handler(uint8_t* data, int len, uint8_t** output_da
         btc_blufi_report_error(ESP_BLUFI_DH_PARAM_ERROR);
         return;
       }
+
+      if (len < (blufi_sec->dh_param_len + 1)) {
+        Log.error(F("%s, invalid dh param len" CR), __func__);
+        btc_blufi_report_error(ESP_BLUFI_DH_PARAM_ERROR);
+        return;
+      }
+
       uint8_t* param = blufi_sec->dh_param;
       memcpy(blufi_sec->dh_param, &data[1], blufi_sec->dh_param_len);
       ret = mbedtls_dhm_read_params(&blufi_sec->dhm, &param, &param[blufi_sec->dh_param_len]);
@@ -88,7 +105,15 @@ void blufi_dh_negotiate_data_handler(uint8_t* data, int len, uint8_t** output_da
       free(blufi_sec->dh_param);
       blufi_sec->dh_param = NULL;
 
-      ret = mbedtls_dhm_make_public(&blufi_sec->dhm, (int)mbedtls_mpi_size(&blufi_sec->dhm.P), blufi_sec->self_public_key, blufi_sec->dhm.len, myrand, NULL);
+      const int dhm_len = mbedtls_dhm_get_len(&blufi_sec->dhm);
+
+      if (dhm_len > DH_SELF_PUB_KEY_LEN) {
+        Log.error(F("%s dhm len not support %d" CR), __func__, dhm_len);
+        btc_blufi_report_error(ESP_BLUFI_DH_PARAM_ERROR);
+        return;
+      }
+
+      ret = mbedtls_dhm_make_public(&blufi_sec->dhm, dhm_len, blufi_sec->self_public_key, DH_SELF_PUB_KEY_LEN, myrand, NULL);
       if (ret) {
         Log.error(F("%s make public failed %d" CR), __func__, ret);
         btc_blufi_report_error(ESP_BLUFI_MAKE_PUBLIC_ERROR);
@@ -106,13 +131,19 @@ void blufi_dh_negotiate_data_handler(uint8_t* data, int len, uint8_t** output_da
         return;
       }
 
-      mbedtls_md5(blufi_sec->share_key, blufi_sec->share_len, blufi_sec->psk);
+      ret = mbedtls_md5(blufi_sec->share_key, blufi_sec->share_len, blufi_sec->psk);
 
-      mbedtls_aes_setkey_enc(&blufi_sec->aes, blufi_sec->psk, 128);
+      if (ret) {
+        Log.error(F("%s mbedtls_md5 failed %d" CR), __func__, ret);
+        btc_blufi_report_error(ESP_BLUFI_CALC_MD5_ERROR);
+        return;
+      }
+
+      mbedtls_aes_setkey_enc(&blufi_sec->aes, blufi_sec->psk, PSK_LEN * 8);
 
       /* alloc output data */
       *output_data = &blufi_sec->self_public_key[0];
-      *output_len = blufi_sec->dhm.len;
+      *output_len = dhm_len;
       *need_free = false;
 
     } break;

main/boardM5.cpp

@@ -29,6 +29,8 @@
 #include "User_config.h"
 
 #if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK) || defined(ZboardM5TOUGH)
+#  include "TheengsCommon.h"
+#  include "config_M5.h"
 #  ifdef ZboardM5STICKC
 #    include <M5StickC.h>
 #  endif
@@ -41,6 +43,13 @@
 #  ifdef ZboardM5TOUGH
 #    include <M5Tough.h>
 #  endif
+
+void wakeScreen(int brightness);
+void displayIntro(int i, int X, int Y);
+void drawLogo(int logoSize, int circle1X, int circle1Y, bool circle1, bool circle2, bool circle3, bool circle4, bool circle5, bool circle6);
+void sleepScreen();
+void setBrightness(int brightness);
+
 void logToLCD(bool display) {
   display ? Log.begin(LOG_LEVEL_LCD, &M5.Lcd) : Log.begin(LOG_LEVEL, &Serial); // Log on LCD following LOG_LEVEL_LCD
 }

main/boardTheengs.cpp

@@ -1,6 +1,17 @@
 #if SELF_TEST
+#  include <Arduino.h>
+#  include <ETH.h>
+#  include <LEDManager.h>
+#  include <WiFi.h>
+#  include <esp_chip_info.h>
 #  include <esp_system.h>
 
+#  include "TheengsCommon.h"
+#  include "User_config.h"
+
+extern LEDManager ledManager;
+extern void ESPRestart(byte reason);
+
 String getChipModel() {
   esp_chip_info_t chip_info;
   esp_chip_info(&chip_info);

main/certs/default_client_cert.h

@@ -1,4 +1,7 @@
-const char* ss_client_cert PROGMEM = R"EOF("
+#pragma once
+#include <Arduino.h>
+
+static const char* ss_client_cert PROGMEM = R"EOF("
 -----BEGIN CERTIFICATE-----
 ...
 -----END CERTIFICATE-----

main/certs/default_client_key.h

@@ -1,4 +1,7 @@
-const char* ss_client_key PROGMEM = R"EOF("
+#pragma once
+#include <Arduino.h>
+
+static const char* ss_client_key PROGMEM = R"EOF("
 -----BEGIN RSA PRIVATE KEY-----
 ...
 -----END RSA PRIVATE KEY-----

main/certs/default_ota_cert.h

@@ -1,6 +1,9 @@
 // The certificate must be in PEM ascii format.
 // The default certificate is for ota.openmqttgateway.com
-const char* OTAserver_cert PROGMEM = R"EOF("
+#pragma once
+#include <Arduino.h>
+
+static const char* OTAserver_cert PROGMEM = R"EOF("
 -----BEGIN CERTIFICATE-----
 MIIDQTCCAimgAwIBAgITBmyfz5m/jAo54vB4ikPmljZbyjANBgkqhkiG9w0BAQsF
 ADA5MQswCQYDVQQGEwJVUzEPMA0GA1UEChMGQW1hem9uMRkwFwYDVQQDExBBbWF6

main/certs/default_server_cert.h

@@ -1,4 +1,7 @@
-const char* ss_server_cert PROGMEM = R"EOF("
+#pragma once
+#include <Arduino.h>
+
+static const char* ss_server_cert PROGMEM = R"EOF("
 -----BEGIN CERTIFICATE-----
 ...
 -----END CERTIFICATE-----

main/commonRF.cpp

@@ -1,13 +1,13 @@
-/*  
+/*
   Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
 
-   Act as a wifi or ethernet gateway between your BLE/433mhz/infrared IR signal and an MQTT broker 
+   Act as a wifi or ethernet gateway between your BLE/433mhz/infrared IR signal and an MQTT broker
    Send and receiving command by MQTT
-  
+
     Copyright: (c)Florian ROBERT
-  
+
     This file is part of OpenMQTTGateway.
-    
+
     OpenMQTTGateway is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation, either version 3 of the License, or
@@ -29,6 +29,17 @@
 #  ifdef ZradioCC1101
 #    include <ELECHOUSE_CC1101_SRC_DRV.h>
 #  endif
+#  include "TheengsCommon.h"
+#  include "config_RF.h"
+
+#  ifdef ZgatewayRTL_433
+#    include <rtl_433_ESP.h>
+extern rtl_433_ESP rtl_433;
+#  endif
+
+RFConfig_s RFConfig;
+void RFConfig_init();
+void RFConfig_load();
 
 void initCC1101() {
 #  ifdef ZradioCC1101 //receiving with CC1101

main/config_2G.h

@@ -26,6 +26,8 @@
 #ifndef config_2G_h
 #define config_2G_h
 
+#include "TheengsCommon.h"
+
 extern void setup2G();
 extern bool _2GtoX();
 extern void Xto2G(const char* topicOri, const char* datacallback);

main/config_BH1750.h

@@ -47,8 +47,7 @@ extern void MeasureLightIntensity();
 /*----------------------------USER PARAMETERS-----------------------------*/
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
 #define subjectBH1750toMQTT "/BH1750toMQTT"
-//Time used to wait for an interval before resending measured values
+
-unsigned long timebh1750 = 0;
+#define BH1750_I2C_ADDR 0x23; // Light Sensor I2C Address
-int BH1750_i2c_addr = 0x23; // Light Sensor I2C Address
 
 #endif

main/config_BME280.h

@@ -53,9 +53,7 @@ extern void MeasureTempHumAndPressure();
 #  define BMETOPIC "/CLIMAtoMQTT/bme"
 #endif
 
-//Time used to wait for an interval before resending measured values
+#define BME280_I2C_ADDR 0x76
-unsigned long timebme280 = 0;
-int BME280_i2c_addr = 0x76; // Bosch BME280 I2C Address
 
 // Only supported for ESP
 #ifndef BME280_PIN_SDA

main/config_BT.h

@@ -26,6 +26,8 @@
 #ifndef config_BT_h
 #define config_BT_h
 
+#include "TheengsCommon.h"
+
 extern void setupBT();
 extern void XtoBT(const char* topicOri, JsonObject& RFdata);
 extern void launchBTDiscovery(bool overrideDiscovery);
@@ -34,7 +36,6 @@ extern String stateBTMeasures(bool);
 
 #ifdef ESP32
 #  include "NimBLEDevice.h"
-
 #endif
 
 /*-----------BT TOPICS & COMPILATION PARAMETERS-----------*/
@@ -135,7 +136,7 @@ extern String stateBTMeasures(bool);
 #  define BLE_CNCT_TIMEOUT 3000
 #endif
 
-unsigned long scanCount = 0;
+extern unsigned long scanCount;
 
 #ifndef pubBLEAdvData
 #  define pubBLEAdvData false // define true if you want to publish all advertisement data

main/config_FASTLED.h

@@ -24,6 +24,8 @@
 #ifndef config_FASTLED_h
 #define config_FASTLED_h
 
+#include "TheengsCommon.h"
+
 extern void setupFASTLED();
 extern void FASTLEDLoop();
 extern void XtoFASTLED(const char*, const char*);
@@ -82,7 +84,7 @@ extern void XtoFASTLED(const char*, JsonObject&);
 #  define FASTLED_ESP8266_D1_GPIO_ORDER
 #  define FASTLED_DATA_GPIO D2 // only D2 works by me
 //#define FASTLED_CLOCK_GPIO 13
-#elif ESP32
+#elif defined(ESP32)
 #  ifndef FASTLED_DATA_GPIO
 #    define FASTLED_DATA_GPIO 16
 #  endif

main/config_GFSunInverter.h

@@ -27,10 +27,6 @@
 #ifndef config_GFSunInverter_h
 #define config_GFSunInverter_h
 
-#include <Arduino.h>
-#include <ArduinoJson.h>
-#include <GfSun2000.h>
-
 extern void setupGFSunInverter();
 extern void ZgatewayGFSunInverterMQTT();
 

main/config_IR.h

@@ -26,6 +26,8 @@
 #ifndef config_IR_h
 #define config_IR_h
 
+#include "TheengsCommon.h"
+
 extern void setupIR();
 extern void IRtoX();
 extern void XtoIR(const char* topicOri, const char* datacallback);
@@ -182,7 +184,7 @@ extern void XtoIR(const char* topicOri, JsonObject& RFdata);
 #ifndef IR_RECEIVER_GPIO
 #  ifdef ESP8266
 #    define IR_RECEIVER_GPIO 2 //D4 /replace by 4 with sonoff rf bridge
-#  elif ESP32
+#  elif defined(ESP32)
 #    define IR_RECEIVER_GPIO 26
 #  endif
 #endif
@@ -190,7 +192,7 @@ extern void XtoIR(const char* topicOri, JsonObject& RFdata);
 #ifndef IR_EMITTER_GPIO
 #  ifdef ESP8266
 #    define IR_EMITTER_GPIO 16 //D0/ replace by 0 (D3) if you use IR LOLIN controller shield /replace by 5 with sonoff rf bridge
-#  elif ESP32
+#  elif defined(ESP32)
 #    define IR_EMITTER_GPIO 14
 #  endif
 #endif

main/config_LORA.h

@@ -26,6 +26,8 @@
 #ifndef config_LORA_h
 #define config_LORA_h
 
+#include "TheengsCommon.h"
+
 extern void setupLORA();
 extern void LORAtoX();
 extern void XtoLORA(const char* topicOri, const char* datacallback);

main/config_MQ2.h

@@ -62,7 +62,4 @@ extern void MQ2toX();
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
 #define subjectMQ2toMQTT "/GAStoMQTT/mq2"
 
-//Time used to wait for an interval before resending measured values
-unsigned long timemq2 = 0;
-
 #endif

main/config_ONOFF.h

@@ -26,6 +26,8 @@
 #ifndef config_ONOFF_h
 #define config_ONOFF_h
 
+#include "TheengsCommon.h"
+
 extern void setupONOFF();
 extern void XtoONOFF(const char* topicOri, const char* datacallback);
 extern void XtoONOFF(const char* topicOri, JsonObject& RFdata);
@@ -70,7 +72,7 @@ extern void stateONOFFMeasures();
 #ifndef ACTUATOR_ONOFF_GPIO
 #  ifdef ESP8266
 #    define ACTUATOR_ONOFF_GPIO 15 //12 for sonoff basic relay
-#  elif ESP32
+#  elif defined(ESP32)
 #    define ACTUATOR_ONOFF_GPIO 15
 #  else
 #    define ACTUATOR_ONOFF_GPIO 13

main/config_PWM.h

@@ -22,7 +22,10 @@
 */
 
 /*-------------------PWM topics & parameters----------------------*/
+#ifndef config_PWM_h
+#define config_PWM_h
 
+#include "TheengsCommon.h"
 // PWM MQTT Subjects
 
 extern void setupPWM();
@@ -55,3 +58,5 @@ extern void XtoPWM(const char*, JsonObject&);
 #ifndef PWM_DEFAULT_GAMMA
 #  define PWM_DEFAULT_GAMMA 2.2f
 #endif
+
+#endif // config_PWM_h

main/config_RF.h

@@ -26,8 +26,7 @@
 #ifndef config_RF_h
 #define config_RF_h
 
-#include <Arduino.h>
+#include "TheengsCommon.h"
-#include <ArduinoJson.h>
 
 #ifdef ZgatewayRF
 extern void setupRF();
@@ -47,14 +46,10 @@ extern void enableRF2Receive();
 #ifdef ZgatewayPilight
 extern void setupPilight();
 extern void PilighttoX();
-extern void XtoPilight(const char* topicOri, const char* datacallback);
-extern void XtoPilight(const char* topicOri, JsonObject& RFdata);
 extern void disablePilightReceive();
 extern void enablePilightReceive();
 #endif
 #ifdef ZgatewayRTL_433
-#  include <rtl_433_ESP.h>
-rtl_433_ESP rtl_433;
 
 extern void RTL_433Loop();
 extern void setupRTL_433();
@@ -217,7 +212,19 @@ struct RFConfig_s {
 #define ACTIVE_RTL      3
 #define ACTIVE_RF2      4
 
-RFConfig_s RFConfig;
+#ifdef ZgatewayRF
+#  define ACTIVE_RECEIVER ACTIVE_RF
+#elif defined(ZgatewayRF2)
+#  define ACTIVE_RECEIVER ACTIVE_RF2
+#elif defined(ZgatewayPilight)
+#  define ACTIVE_RECEIVER ACTIVE_PILIGHT
+#elif defined(ZgatewayRTL_433)
+#  define ACTIVE_RECEIVER ACTIVE_RTL
+#else
+#  define ACTIVE_RECEIVER ACTIVE_NONE
+#endif
+
+extern RFConfig_s RFConfig;
 
 /*-------------------CC1101 DefaultTXPower----------------------*/
 //Adjust the default TX-Power for sending radio if ZradioCC1101 is used.
@@ -230,7 +237,7 @@ RFConfig_s RFConfig;
 #ifndef RF_RECEIVER_GPIO
 #  ifdef ESP8266
 #    define RF_RECEIVER_GPIO 0 // D3 on nodemcu // put 4 with rf bridge direct mod
-#  elif ESP32
+#  elif defined(ESP32)
 #    define RF_RECEIVER_GPIO 27 // D27 on DOIT ESP32
 #  endif
 #endif
@@ -238,7 +245,7 @@ RFConfig_s RFConfig;
 #ifndef RF_EMITTER_GPIO
 #  ifdef ESP8266
 #    define RF_EMITTER_GPIO 3 // RX on nodemcu if it doesn't work with 3, try with 4 (D2) // put 5 with rf bridge direct mod
-#  elif ESP32
+#  elif defined(ESP32)
 #    define RF_EMITTER_GPIO 12 // D12 on DOIT ESP32
 #  else
 //IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/boarddefs.h so as to free pin D3 for RF RECEIVER PIN

main/config_RFM69.h

@@ -26,6 +26,8 @@
 #ifndef config_RFM69_h
 #define config_RFM69_h
 
+#include "TheengsCommon.h"
+
 extern void setupRFM69();
 extern bool RFM69toX();
 extern void XtoRFM69(const char* topicOri, const char* datacallback);
@@ -43,12 +45,12 @@ extern void XtoRFM69(const char* topicOri, JsonObject& RFdata);
 #define defaultRFM69ReceiverId 99
 
 // Default values
-const char PROGMEM ENCRYPTKEY[] = "sampleEncryptKey";
+#define RFM69_ENCRYPTKEY   "sampleEncryptKey";
-const char PROGMEM MDNS_NAME[] = "rfm69gw1";
+#define RFM69_MDNS_NAME    "rfm69gw1";
-const char PROGMEM MQTT_BROKER[] = "raspi2";
+#define RFM69_MQTT_BROKER  "raspi2";
-const char PROGMEM RFM69AP_NAME[] = "RFM69-AP";
+#define RFM69_RFM69AP_NAME "RFM69-AP";
-#define NETWORKID 200 //the same on all nodes that talk to each other
+#define RFM69_NETWORKID    200 //the same on all nodes that talk to each other
-#define NODEID    10
+#define RFM69_NODEID       10
 
 //Match frequency to the hardware version of the radio
 #define FREQUENCY RF69_433MHZ

main/config_SERIAL.h

@@ -26,6 +26,8 @@
 #ifndef config_SERIAL_h
 #define config_SERIAL_h
 
+#include "TheengsCommon.h"
+
 extern void setupSERIAL();
 extern void SERIALtoX();
 extern bool XtoSERIAL(const char* topicOri, JsonObject& SERIALdata);
@@ -131,7 +133,7 @@ extern bool XtoSERIAL(const char* topicOri, JsonObject& SERIALdata);
 // define transmit pin (for software serial and/or ESP32)
 #  if defined(ESP8266) && !defined(SERIAL_UART)
 #    define SERIAL_TX_GPIO 2 //D4
-#  elif ESP32
+#  elif defined(ESP32)
 #    define SERIAL_TX_GPIO 14
 #  endif
 #endif

main/config_SRFB.h

@@ -27,6 +27,8 @@
 #ifndef config_SRFB_h
 #define config_SRFB_h
 
+#include "TheengsCommon.h"
+
 extern void setupSRFB();
 extern bool SRFBtoX();
 extern void XtoSRFB(const char* topicOri, const char* datacallback);

main/config_SSD1306.h

@@ -34,11 +34,7 @@
 #ifndef config_SSD1306_h
 #define config_SSD1306_h
 
-#include <Arduino.h>
+#include "TheengsCommon.h"
-#include <ArduinoJson.h>
-#include <Wire.h>
-
-#include "SSD1306Wire.h"
 #include "config_WebUI.h"
 
 /*-------------------DEFINE LOG LEVEL----------------------*/
@@ -140,53 +136,4 @@ void ssd1306Print(char*);
 
 /*-------------------End of Global Variables----------------------*/
 
-// This pattern was borrowed from HardwareSerial and modified to support the ssd1306 display
-
-class OledSerial : public Stream {
-public:
-  OledSerial(int);
-  void begin();
-  void drawLogo(int xshift, int yshift);
-  boolean displayPage(webUIQueueMessage*);
-
-  SSD1306Wire* display;
-
-  int available(void); // Dummy functions
-  int peek(void); // Dummy functions
-  int read(void); // Dummy functions
-  void flush(void); // Dummy functions
-
-  void fillScreen(OLEDDISPLAY_COLOR); // fillScreen display and set color
-
-  // This is a bit of lazy programmer simplification for the semaphore and core detecting code.  Not sure if it is truly space efficient.
-
-  inline size_t write(uint8_t x) {
-    return write(&x, 1);
-  }
-
-  size_t write(const uint8_t* buffer, size_t size);
-  inline size_t write(const char* buffer, size_t size) {
-    return write((uint8_t*)buffer, size);
-  }
-  inline size_t write(const char* s) {
-    return write((uint8_t*)s, strlen(s));
-  }
-  inline size_t write(unsigned long n) {
-    return write((uint8_t)n);
-  }
-  inline size_t write(long n) {
-    return write((uint8_t)n);
-  }
-  inline size_t write(unsigned int n) {
-    return write((uint8_t)n);
-  }
-  inline size_t write(int n) {
-    return write((uint8_t)n);
-  }
-
-protected:
-};
-
-extern OledSerial Oled;
-
 #endif

main/config_Somfy.h

@@ -24,8 +24,7 @@
 #ifndef config_Somfy_h
 #define config_Somfy_h
 
-#include <Arduino.h>
+#include "TheengsCommon.h"
-#include <ArduinoJson.h>
 
 extern void setupSomfy();
 extern void XtoSomfy(const char* topicOri, JsonObject& RFdata);

main/config_TEMT6000.h

@@ -49,7 +49,4 @@ extern void MeasureLightIntensityTEMT6000();
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
 #define subjectTEMT6000toMQTT "/LIGHTtoMQTT"
 
-//Time used to wait for an interval before resending measured values
-unsigned long timetemt6000 = 0;
-
 #endif

main/config_TSL2561.h

@@ -48,8 +48,4 @@ extern void MeasureLightIntensityTSL2561();
 /*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
 #define subjectTSL12561toMQTT "/LIGHTtoMQTT"
 
-//Time used to wait for an interval before resending measured values
-unsigned long timetsl2561 = 0;
-//int TSL2561_i2c_addr = 0x37; // Light Sensor I2C Address (Set in Adafruit library)
-
 #endif

main/config_WeatherStation.h

@@ -26,9 +26,6 @@
 #ifndef config_WeatherStation_h
 #define config_WeatherStation_h
 
-#include <Arduino.h>
-#include <ArduinoJson.h>
-
 extern void setupWeatherStation();
 extern void ZgatewayWeatherStationtoX();
 /*----------------------------USER PARAMETERS-----------------------------*/
@@ -39,7 +36,7 @@ extern void ZgatewayWeatherStationtoX();
 #ifndef RF_WS_RECEIVER_GPIO
 #  ifdef ESP8266
 #    define RF_WS_RECEIVER_GPIO 0 // D3 on nodemcu // put 4 with rf bridge direct mod
-#  elif ESP32
+#  elif defined(ESP32)
 #    define RF_WS_RECEIVER_GPIO 27 // D27 on DOIT ESP32
 #  endif
 #endif

main/config_WebUI.h

@@ -1,15 +1,15 @@
-/*  
+/*
   Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
 
-   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker 
+   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
    Send and receiving command by MQTT
- 
+
    This files enables to set your parameter for the DHT11/22 sensor
-  
+
     Copyright: (c)Florian ROBERT
-  
+
     This file is part of OpenMQTTGateway.
-    
+
     OpenMQTTGateway is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation, either version 3 of the License, or
@@ -26,9 +26,10 @@
 #ifndef config_WebUI_h
 #define config_WebUI_h
 
-#include <ArduinoJson.h>
 #include <Wire.h>
 
+#include "TheengsCommon.h"
+
 #define WEBUI_TEXT_WIDTH 128
 
 /*------------------- Optional Compiler Directives ----------------------*/
@@ -65,6 +66,8 @@
 #  define WEBUI_LOGIN "admin"
 #endif
 
+extern char ota_pass[];
+
 /*------------------- End of Compiler Directives ----------------------*/
 
 #define WEBUI_SECURE                                                                    \
@@ -92,7 +95,7 @@ struct webUIQueueMessage {
   char line2[WEBUI_TEXT_WIDTH];
   char line3[WEBUI_TEXT_WIDTH];
   char line4[WEBUI_TEXT_WIDTH];
-} webUIQueueMessage_t;
+};
 
 /*------------------- Global Functions and Variables ----------------------*/
 
@@ -106,8 +109,8 @@ void XtoWebUI(const char*, JsonObject&);
 
 String stateWebUIStatus();
 
-webUIQueueMessage* currentWebUIMessage;
+extern webUIQueueMessage* currentWebUIMessage;
-bool newSSD1306Message = false; // Flag to indicate new message to display
+extern bool newSSD1306Message; // Flag to indicate new message to display
 
 /*------------------- End of Global Functions ----------------------*/
 

main/config_mqttDiscovery.h

@@ -32,7 +32,7 @@ extern void pubMqttDiscovery();
 
 /**
  * Create a discover messages form a list of attribute
- * 
+ *
  * @param mac the MAC address
  * @param sensorList[][0] = component type
  * @param sensorList[][1] = name
@@ -57,7 +57,7 @@ extern void createDiscoveryFromList(const char* mac,
 
 /**
  * @brief Generate message and publish it on an MQTT discovery exploiter. For HA @see https://www.home-assistant.io/docs/mqtt/discovery/
- * 
+ *
  * @param sensor_type the Type
  * @param st_topic set state topic,
  * @param s_name set name,
@@ -71,15 +71,15 @@ extern void createDiscoveryFromList(const char* mac,
  * @param off_delay set off_delay
  * @param payload_available set payload_available,
  * @param payload_not_available set payload_not_available
- * @param gateway_entity set is a gateway entity, 
+ * @param gateway_entity set is a gateway entity,
  * @param cmd_topic set command topic
- * @param device_name set device name, 
+ * @param device_name set device name,
- * @param device_manufacturer set device manufacturer, 
+ * @param device_manufacturer set device manufacturer,
- * @param device_model set device model, 
+ * @param device_model set device model,
- * @param device_mac set device MAC, 
+ * @param device_mac set device MAC,
  * @param retainCmd set retain
  * @param state_class set state class
- * 
+ *
  * */
 extern void createDiscovery(const char* sensor_type,
                             const char* state_topic, const char* s_name, const char* unique_id,
@@ -95,7 +95,7 @@ extern void createDiscovery(const char* sensor_type,
  * @param topic                 Mandatory - The MQTT topic subscribed to receive trigger events.
  * @param type                  The type of the trigger, e.g. button_short_press. Entries supported by the HA Frontend: button_short_press, button_short_release, button_long_press, button_long_release, button_double_press, button_triple_press, button_quadruple_press, button_quintuple_press. If set to an unsupported value, will render as subtype type, e.g. button_1 spammed with type set to spammed and subtype set to button_1
  * @param subtype               The subtype of the trigger, e.g. button_1. Entries supported by the HA frontend: turn_on, turn_off, button_1, button_2, button_3, button_4, button_5, button_6. If set to an unsupported value, will render as subtype type, e.g. left_button pressed with type set to button_short_press and subtype set to left_button
-  * @param object_id             The object_id of the trigger.   
+  * @param object_id             The object_id of the trigger.
  * @param value_template        The template to render the value of the trigger. The template can use the variables trigger.id, trigger.type, trigger.subtype, trigger.payload, trigger.payload_json, trigger.topic, trigger.timestamp, trigger.value, trigger.value_json. The template can be a string or a JSON object. If the template is a JSON object, it must be a valid JSON object. If the template is a string, it will be rendered as a string. If the template is a JSON object, it will be rendered as a JSON object.
  */
 void announceGatewayTrigger(const char* topic,
@@ -111,7 +111,7 @@ void announceGatewayTrigger(const char* topic,
 #ifndef discovery_Prefix
 #  define discovery_Prefix "homeassistant"
 #endif
-char discovery_prefix[parameters_size + 1] = discovery_Prefix;
+extern char discovery_prefix[];
 
 // discovery_republish_on_reconnect false to publish discovery topics over MQTT only with first connect
 // discovery_republish_on_reconnect true to always republish discovery topics over MQTT when connection is re-established
@@ -176,86 +176,6 @@ char discovery_prefix[parameters_size + 1] = discovery_Prefix;
 #define stateClassTotal           "total"
 #define stateClassTotalIncreasing "total_increasing"
 
-// From https://github.com/home-assistant/core/blob/d7ac4bd65379e11461c7ce0893d3533d8d8b8cbf/homeassistant/const.py#L225
-// List of classes available in Home Assistant
-const char* availableHASSClasses[] = {"battery_charging",
-                                      "battery",
-                                      "carbon_dioxide",
-                                      "carbon_monoxide",
-                                      "current",
-                                      "data_size",
-                                      "distance",
-                                      "door",
-                                      "duration",
-                                      "energy",
-                                      "enum",
-                                      "gas",
-                                      "humidity",
-                                      "illuminance",
-                                      "irradiance",
-                                      "lock",
-                                      "motion",
-                                      "moving",
-                                      "pm1",
-                                      "pm10",
-                                      "pm25",
-                                      "power_factor",
-                                      "power",
-                                      "precipitation_intensity",
-                                      "precipitation",
-                                      "pressure",
-                                      "problem",
-                                      "restart",
-                                      "signal_strength",
-                                      "sound_pressure",
-                                      "temperature",
-                                      "timestamp",
-                                      "voltage",
-                                      "water",
-                                      "weight",
-                                      "wind_speed",
-                                      "window"};
-
-// From https://github.com/home-assistant/core/blob/d7ac4bd65379e11461c7ce0893d3533d8d8b8cbf/homeassistant/const.py#L379
-// List of units available in Home Assistant
-const char* availableHASSUnits[] = {"W",
-                                    "kW",
-                                    "V",
-                                    "kWh",
-                                    "A",
-                                    "W",
-                                    "°C",
-                                    "°F",
-                                    "ms",
-                                    "s",
-                                    "min",
-                                    "hPa",
-                                    "L",
-                                    "kg",
-                                    "lb",
-                                    "µS/cm",
-                                    "ppm",
-                                    "μg/m³",
-                                    "m³",
-                                    "mg/m³",
-                                    "m/s²",
-                                    "mV",
-                                    "lx",
-                                    "Ω",
-                                    "%",
-                                    "bar",
-                                    "bpm",
-                                    "dB",
-                                    "dBm",
-                                    "B",
-                                    "UV index",
-                                    "m/s",
-                                    "km/h",
-                                    "°",
-                                    "mm",
-                                    "mm/h",
-                                    "cm"};
-
 // Define the command used to update through OTA depending if we want to update from dev nightly or latest release
 #if DEVELOPMENTOTA
 #  define LATEST_OR_DEV "{\"version\":\"dev\"}"

main/displaySSD1306.cpp

@@ -31,17 +31,61 @@
     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
+#include "User_config.h"
+
 #if defined(ZdisplaySSD1306)
-
+#  include "SSD1306Wire.h"
-#  include <ArduinoJson.h>
+#  include "TheengsCommon.h"
-
-#  include "ArduinoLog.h"
-#  include "User_config.h"
 #  include "config_SSD1306.h"
 #  ifdef DISPLAY_BLANKING
 #    include "driver/touch_sensor.h"
 #  endif
 
+// This pattern was borrowed from HardwareSerial and modified to support the ssd1306 display
+
+class OledSerial : public Stream {
+public:
+  OledSerial(int);
+  void begin();
+  void drawLogo(int xshift, int yshift);
+  boolean displayPage(webUIQueueMessage*);
+
+  SSD1306Wire* display;
+
+  int available(void); // Dummy functions
+  int peek(void); // Dummy functions
+  int read(void); // Dummy functions
+  void flush(void); // Dummy functions
+
+  void fillScreen(OLEDDISPLAY_COLOR); // fillScreen display and set color
+
+  // This is a bit of lazy programmer simplification for the semaphore and core detecting code.  Not sure if it is truly space efficient.
+
+  inline size_t write(uint8_t x) {
+    return write(&x, 1);
+  }
+
+  size_t write(const uint8_t* buffer, size_t size);
+  inline size_t write(const char* buffer, size_t size) {
+    return write((uint8_t*)buffer, size);
+  }
+  inline size_t write(const char* s) {
+    return write((uint8_t*)s, strlen(s));
+  }
+  inline size_t write(unsigned long n) {
+    return write((uint8_t)n);
+  }
+  inline size_t write(long n) {
+    return write((uint8_t)n);
+  }
+  inline size_t write(unsigned int n) {
+    return write((uint8_t)n);
+  }
+  inline size_t write(int n) {
+    return write((uint8_t)n);
+  }
+} Oled(0); // Oled object
+
 SemaphoreHandle_t semaphoreOLEDOperation;
 
 boolean logToOLEDDisplay = LOG_TO_OLED;
@@ -50,7 +94,11 @@ boolean displayFlip = DISPLAY_FLIP;
 boolean displayState = DISPLAY_STATE;
 boolean idlelogo = DISPLAY_IDLE_LOGO;
 uint8_t displayBrightness = DISPLAY_BRIGHTNESS;
+bool newSSD1306Message = false; // Flag to indicate new message to display
 
+void SSD1306Config_init();
+bool SSD1306Config_load();
+void SSD1306Config_save();
 /*
 Toogle log display
 */
@@ -66,12 +114,12 @@ void setupSSD1306() {
   SSD1306Config_init();
   SSD1306Config_load();
   Log.trace(F("Setup SSD1306 Display" CR));
-  Log.trace(F("ZdisplaySSD1306 command topic: %s" CR), subjectMQTTtoSSD1306set);
+  Log.trace(F("displaySSD1306 command topic: %s" CR), subjectMQTTtoSSD1306set);
-  Log.trace(F("ZdisplaySSD1306 log-oled: %T" CR), logToOLEDDisplay);
+  Log.trace(F("displaySSD1306 log-oled: %T" CR), logToOLEDDisplay);
-  Log.trace(F("ZdisplaySSD1306 json-oled: %T" CR), jsonDisplay);
+  Log.trace(F("displaySSD1306 json-oled: %T" CR), jsonDisplay);
-  Log.trace(F("ZdisplaySSD1306 DISPLAY_PAGE_INTERVAL: %d" CR), DISPLAY_PAGE_INTERVAL);
+  Log.trace(F("displaySSD1306 DISPLAY_PAGE_INTERVAL: %d" CR), DISPLAY_PAGE_INTERVAL);
-  Log.trace(F("ZdisplaySSD1306 DISPLAY_IDLE_LOGO: %T" CR), idlelogo);
+  Log.trace(F("displaySSD1306 DISPLAY_IDLE_LOGO: %T" CR), idlelogo);
-  Log.trace(F("ZdisplaySSD1306 DISPLAY_FLIP: %T" CR), displayFlip);
+  Log.trace(F("displaySSD1306 DISPLAY_FLIP: %T" CR), displayFlip);
   Oled.begin();
   Log.notice(F("Setup SSD1306 Display end" CR));
 
@@ -316,7 +364,6 @@ void ssd1306Print(char* line1) {
 
 // This pattern was borrowed from HardwareSerial and modified to support the ssd1306 display
 
-OledSerial Oled(0); // Not sure about this, came from Hardwareserial
 OledSerial::OledSerial(int x) {
 #  if defined(WIFI_Kit_32) || defined(WIFI_LoRa_32) || defined(WIFI_LoRa_32_V2)
   pinMode(RST_OLED, OUTPUT); // https://github.com/espressif/arduino-esp32/issues/4278

main/gateway2G.cpp

@@ -30,7 +30,12 @@
 #ifdef Zgateway2G
 
 #  include <A6lib.h> // library for controling A6 or A7 module
-#  include <ArduinoJson.h>
+
+#  include "TheengsCommon.h"
+#  include "config_2G.h"
+
+void signalStrengthAnalysis();
+void setupGSM(bool deleteSMS);
 
 // Instantiate the library with TxPin, RxPin.
 A6lib A6l(_2G_TX_GPIO, _2G_RX_GPIO); //D6 to A6 RX, D7 to A6 TX
@@ -43,7 +48,7 @@ void setup2G() {
   Log.notice(F("_2G_TX_GPIO: %d " CR), _2G_TX_GPIO);
   Log.notice(F("_2G_RX_GPIO: %d " CR), _2G_RX_GPIO);
   setupGSM(false);
-  Log.trace(F("Zgateway2G setup done " CR));
+  Log.trace(F("gateway2G setup done " CR));
 }
 
 void setupGSM(bool deleteSMS) {

main/gatewayBLEConnect.cpp

@@ -1,12 +1,13 @@
 #ifdef ESP32
 #  include "User_config.h"
 #  ifdef ZgatewayBT
-#    include "ArduinoJson.h"
+#    include "gatewayBLEConnect.h"
-#    include "ArduinoLog.h"
+#    include "mbedtls/aes.h"
-#    include "ZgatewayBLEConnect.h"
+
 #    define convertTemp_CtoF(c) ((c * 1.8) + 32)
 
 extern std::vector<BLEdevice*> devices;
+extern bool BTProcessLock;
 
 NimBLERemoteCharacteristic* zBLEConnect::getCharacteristic(const NimBLEUUID& service,
                                                            const NimBLEUUID& characteristic) {

main/gatewayBLEConnect.h

@@ -2,8 +2,8 @@
 #define zBLEConnect_h
 
 #ifdef ESP32
-#  include "ArduinoJson.h"
 #  include "NimBLEDevice.h"
+#  include "TheengsCommon.h"
 #  include "config_BT.h"
 
 class zBLEConnect {

main/gatewayBT.cpp

@@ -29,11 +29,12 @@ Thanks to wolass https://github.com/wolass for suggesting me HM 10 and dinosd ht
 #include "User_config.h"
 
 #ifdef ZgatewayBT
+#  include "TheengsCommon.h"
 
 SemaphoreHandle_t semaphoreCreateOrUpdateDevice;
 SemaphoreHandle_t semaphoreBLEOperation;
 QueueHandle_t BLEQueue;
-// Headers used for deep sleep functions
+unsigned long scanCount = 0;
 #  include <NimBLEAdvertisedDevice.h>
 #  include <NimBLEDevice.h>
 #  include <NimBLEScan.h>
@@ -43,7 +44,9 @@ QueueHandle_t BLEQueue;
 
 #  include <atomic>
 
-#  include "ZgatewayBLEConnect.h"
+#  include "TheengsCommon.h"
+#  include "config_mqttDiscovery.h"
+#  include "gatewayBLEConnect.h"
 #  include "soc/timer_group_reg.h"
 #  include "soc/timer_group_struct.h"
 
@@ -71,15 +74,26 @@ vector<BLEAction> BLEactions;
 vector<BLEdevice*> devices;
 int newDevices = 0;
 
-static BLEdevice NO_BT_DEVICE_FOUND = {{0},
+static BLEdevice NO_BT_DEVICE_FOUND = {
-                                       0,
+    {0},
-                                       false,
+    0,
-                                       false,
+    false,
-                                       false,
+    false,
-                                       false,
+    false,
-                                       UNKWNON_MODEL};
+    false,
+    (int)UNKWNON_MODEL,
+    0,
+};
 static bool oneWhite = false;
 
+extern bool BTProcessLock;
+extern int queueLength;
+
+void setupBTTasksAndBLE();
+bool checkIfIsTracker(char ch);
+void hass_presence(JsonObject& HomePresence);
+void BTforceScan();
+
 void BTConfig_init() {
   BTConfig.bleConnect = AttemptBLEConnect;
   BTConfig.BLEinterval = TimeBtwRead;
@@ -846,7 +860,7 @@ void setupBTTasksAndBLE() {
   BLEDevice::setScanDuplicateCacheSize(BLEScanDuplicateCacheSize);
 #  endif
   BLEDevice::init("");
-  xTaskCreatePinnedToCore(
+  xTaskCreateUniversal(
       procBLETask, /* Function to implement the task */
       "procBLETask", /* Name of the task */
 #  if defined(USE_ESP_IDF) || defined(USE_BLUFI)
@@ -860,7 +874,7 @@ void setupBTTasksAndBLE() {
       1); /* Core where the task should run */
 
   // we setup a task with priority one to avoid conflict with other gateways
-  xTaskCreatePinnedToCore(
+  xTaskCreateUniversal(
       coreTask, /* Function to implement the task */
       "coreTask", /* Name of the task */
       5120, /* Stack size in bytes */
@@ -897,9 +911,9 @@ void setupBT() {
   BLEQueue = xQueueCreate(QueueSize, sizeof(NimBLEAdvertisedDevice*));
   if (BTConfig.enabled) {
     setupBTTasksAndBLE();
-    Log.notice(F("ZgatewayBT multicore ESP32 setup done" CR));
+    Log.notice(F("gatewayBT multicore ESP32 setup done" CR));
   } else {
-    Log.notice(F("ZgatewayBT multicore ESP32 setup disabled" CR));
+    Log.notice(F("gatewayBT multicore ESP32 setup disabled" CR));
   }
 }
 
@@ -1399,7 +1413,7 @@ void immediateBTAction(void* pvParameters) {
 
 void startBTActionTask() {
   TaskHandle_t th;
-  xTaskCreatePinnedToCore(
+  xTaskCreateUniversal(
       immediateBTAction, /* Function to implement the task */
       "imActTask", /* Name of the task */
       8000, /* Stack size in bytes */

main/gatewayGFSunInverter.cpp

@@ -27,6 +27,11 @@
 
 #ifdef ZgatewayGFSunInverter
 
+#  include <GfSun2000.h>
+
+#  include "TheengsCommon.h"
+#  include "config_GFSunInverter.h"
+
 GfSun2000 GF = GfSun2000();
 
 void GFSunInverterDataHandler(GfSun2000Data data) {
@@ -79,7 +84,7 @@ void setupGFSunInverter() {
   GF.setup(Serial2);
   GF.setDataHandler(GFSunInverterDataHandler);
   GF.setErrorHandler(GFSunInverterErrorHandler);
-  Log.trace(F("ZgatewayGFSunInverter setup done " CR));
+  Log.trace(F("gatewayGFSunInverter setup done " CR));
 }
 
 void ZgatewayGFSunInverterMQTT() {

main/gatewayIR.cpp

@@ -28,11 +28,13 @@
 #include "User_config.h"
 
 #ifdef ZgatewayIR
-
 #  include <IRrecv.h> // Needed if you want to receive IR commands.
 #  include <IRremoteESP8266.h>
 #  include <IRsend.h> // Needed if you want to send IR commands.
 #  include <IRutils.h>
+
+#  include "TheengsCommon.h"
+#  include "config_IR.h"
 #  ifdef DumpMode // in dump mode we increase the size of the buffer to catch big codes
 IRrecv irrecv(IR_RECEIVER_GPIO, 1024, 15U, true);
 #  else
@@ -99,7 +101,7 @@ void setupIR() {
 
   Log.notice(F("IR_EMITTER_GPIO: %d " CR), IR_EMITTER_GPIO);
   Log.notice(F("IR_RECEIVER_GPIO: %d " CR), IR_RECEIVER_GPIO);
-  Log.trace(F("ZgatewayIR setup done " CR));
+  Log.trace(F("gatewayIR setup done " CR));
 }
 
 void IRtoX() {
@@ -1084,7 +1086,7 @@ bool sendIdentifiedProtocol(const char* protocol_name, uint64_t data, const char
   }
 #  endif
 #  ifdef IR_ZEPEAL
-  if (strcmp(protocol_name, "ZEPEAL") == 0) {
+  if (strcmp(protocol_name, "EPEAL") == 0) {
     Log.notice(F("Sending IR signal with %s" CR), protocol_name);
     if (valueRPT == repeatIRwNumber)
       valueRPT = std::max(valueRPT, kZepealMinRepeat);

main/gatewayLORA.cpp

@@ -28,18 +28,35 @@
 #include "User_config.h"
 
 #ifdef ZgatewayLORA
-
 #  include <LoRa.h>
 #  include <SPI.h>
+#  include <TheengsUtils.h>
 #  include <Wire.h>
 
+#  include "TheengsCommon.h"
+#  include "config_LORA.h"
+#  include "config_mqttDiscovery.h"
+
 #  define WIPHONE_MESSAGE_MAGIC   0x6c6d
 #  define WIPHONE_MESSAGE_MIN_LEN sizeof(wiphone_message) - WIPHONE_MAX_MESSAGE_LEN
 #  define WIPHONE_MAX_MESSAGE_LEN 230
 
 LORAConfig_s LORAConfig;
 
+void LORAConfig_fromJson(JsonObject& LORAdata);
+String stateLORAMeasures();
+
 #  ifdef ZmqttDiscovery
+#    include "config_mqttDiscovery.h"
+extern void createDiscovery(const char* sensor_type,
+                            const char* st_topic, const char* s_name, const char* unique_id,
+                            const char* availability_topic, const char* device_class, const char* value_template,
+                            const char* payload_on, const char* payload_off, const char* unit_of_meas,
+                            int off_delay,
+                            const char* payload_available, const char* payload_not_available, bool gateway_entity, const char* cmd_topic,
+                            const char* device_name, const char* device_manufacturer, const char* device_model, const char* device_id, bool retainCmd,
+                            const char* state_class, const char* state_off, const char* state_on, const char* enum_options, const char* command_template);
+
 SemaphoreHandle_t semaphorecreateOrUpdateDeviceLORA;
 std::vector<LORAdevice*> LORAdevices;
 int newLORADevices = 0;
@@ -389,9 +406,8 @@ void setupLORA() {
   LoRa.setPins(LORA_SS, LORA_RST, LORA_DI0);
 
   if (!LoRa.begin(LORAConfig.frequency)) {
-    Log.error(F("ZgatewayLORA setup failed!" CR));
+    Log.error(F("gatewayLORA setup failed!" CR));
-    while (1)
+    while (1);
-      ;
   }
   LoRa.receive();
   Log.notice(F("LORA_SCK: %d" CR), LORA_SCK);
@@ -400,7 +416,7 @@ void setupLORA() {
   Log.notice(F("LORA_SS: %d" CR), LORA_SS);
   Log.notice(F("LORA_RST: %d" CR), LORA_RST);
   Log.notice(F("LORA_DI0: %d" CR), LORA_DI0);
-  Log.trace(F("ZgatewayLORA setup done" CR));
+  Log.trace(F("gatewayLORA setup done" CR));
 }
 
 void LORAtoX() {

main/gatewayPilight.cpp

@@ -28,6 +28,15 @@
 #include "User_config.h"
 
 #ifdef ZgatewayPilight
+#  include "TheengsCommon.h"
+
+#  if defined(ESP32)
+#    include <SPIFFS.h>
+#  else
+#    include <FS.h>
+#  endif
+
+#  include "config_RF.h"
 
 #  ifdef ZradioCC1101
 #    include <ELECHOUSE_CC1101_SRC_DRV.h>
@@ -41,6 +50,10 @@ ESPiLight rf(RF_EMITTER_GPIO); // use -1 to disable transmitter
 bool pilightRawEnabled = 0;
 #  endif
 
+void disableCurrentReceiver();
+void initCC1101();
+void enableActiveReceiver();
+
 void pilightCallback(const String& protocol, const String& message, int status,
                      size_t repeats, const String& deviceID) {
   if (status == VALID) {
@@ -297,7 +310,7 @@ extern void enablePilightReceive() {
   Log.notice(F("Switching to Pilight Receiver: %F" CR), RFConfig.frequency);
   Log.notice(F("RF_EMITTER_GPIO: %d " CR), RF_EMITTER_GPIO);
   Log.notice(F("RF_RECEIVER_GPIO: %d " CR), RF_RECEIVER_GPIO);
-  Log.trace(F("ZgatewayPilight command topic: %s%s%s" CR), mqtt_topic, gateway_name, subjectMQTTtoPilight);
+  Log.trace(F("gatewayPilight command topic: %s%s%s" CR), mqtt_topic, gateway_name, subjectMQTTtoPilight);
 
   initCC1101();
 
@@ -311,6 +324,6 @@ extern void enablePilightReceive() {
   pinMode(RF_EMITTER_GPIO, OUTPUT); // Set this here, because if this is the RX pin it was reset to INPUT by Serial.end();
   rf.enableReceiver();
   loadPilightConfig();
-  Log.trace(F("ZgatewayPilight setup done " CR));
+  Log.trace(F("gatewayPilight setup done " CR));
 };
 #endif

main/gatewayRF.cpp

@@ -1,17 +1,17 @@
-/*  
+/*
   Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
 
-   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker 
+   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
    Send and receiving command by MQTT
- 
+
   This gateway enables to:
  - receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data
  - publish MQTT data to a different topic related to received 433Mhz signal
 
     Copyright: (c)Florian ROBERT
-  
+
     This file is part of OpenMQTTGateway.
-    
+
     OpenMQTTGateway is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation, either version 3 of the License, or
@@ -28,15 +28,18 @@
 #include "User_config.h"
 
 #ifdef ZgatewayRF
-#  include <ArduinoJson.h>
+#  include "TheengsCommon.h"
-#  include <ArduinoLog.h>
+#  include "config_RF.h"
-
 #  ifdef ZradioCC1101
 #    include <ELECHOUSE_CC1101_SRC_DRV.h>
+extern void initCC1101();
 #  endif
 
 #  include <RCSwitch.h> // library for controling Radio frequency switch
 
+void disableCurrentReceiver();
+void enableActiveReceiver();
+
 RCSwitch mySwitch = RCSwitch();
 
 /**
@@ -49,7 +52,7 @@ RCSwitch mySwitch = RCSwitch();
  * - 'F' represents "01" in the binary string
  *
  * If the input binary string contains any other combination, the function returns "-".
- * 
+ *
  * @note CONVERSION function from https://github.com/sui77/rc-switch/tree/master/examples/ReceiveDemo_Advanced
  *
  * @param bin The input binary string.
@@ -88,7 +91,7 @@ static const char* bin2tristate(const char* bin) {
  *
  * @note The returned string is stored in a static buffer, so it will be overwritten by subsequent
  * calls to this function. The buffer size is fixed at 64 characters.
- * 
+ *
  * @note CONVERSION function from https://github.com/sui77/rc-switch/tree/master/examples/ReceiveDemo_Advanced
  *
  */
@@ -146,13 +149,13 @@ void announceGatewayTriggerTypeToHASS(uint64_t MQTTvalue) {
 
 /**
  * @brief Processes received RF signals and converts them to JSON format for further handling.
- * 
+ *
  * This function checks if an RF signal is available, extracts relevant data from the signal,
  * and stores it in a JSON object. It also handles duplicate signal detection and optionally
  * publishes the signal data for MQTT discovery and repetition.
- * 
+ *
  * @note This function is designed to work with both ESP32 and ESP8266 platforms.
- * 
+ *
  * @details The function performs the following steps:
  * - Checks if an RF signal is available.
  * - Logs the reception of the RF signal.
@@ -162,7 +165,7 @@ void announceGatewayTriggerTypeToHASS(uint64_t MQTTvalue) {
  * - Resets the availability status of the RF signal.
  * - Checks for duplicate signals and processes the signal if it is not a duplicate.
  * - Optionally publishes the signal data for MQTT discovery and repetition.
- * 
+ *
  * @param None
  * @return void
  */
@@ -384,8 +387,8 @@ void disableRFReceive() {
 /**
  * @brief Enables the RF receiver and optionally the RF transmitter.
  *
- * This function initializes the RF receiver on the specified GPIO pin and, if not disabled, 
+ * This function initializes the RF receiver on the specified GPIO pin and, if not disabled,
- * initializes the RF transmitter on the specified GPIO pin. It also sets the RF frequency 
+ * initializes the RF transmitter on the specified GPIO pin. It also sets the RF frequency
  * and logs the configuration details.
  *
  * @param rfFrequency The frequency for the RF communication in MHz. Default is RFConfig.frequency.

main/gatewayRF2.cpp

@@ -1,17 +1,17 @@
-/*  
+/*
   Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
 
-   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker 
+   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
    Send and receiving command by MQTT
- 
+
   This gateway enables to:
  - publish MQTT data to a different topic related to received 433Mhz signal DIO/new kaku protocol
 
     Copyright: (c)Florian ROBERT
     Copyright: (c)Randy Simons http://randysimons.nl/
-  
+
     This file is part of OpenMQTTGateway.
-    
+
     OpenMQTTGateway is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation, either version 3 of the License, or
@@ -36,6 +36,9 @@ sudo mosquitto_pub -t home/commands/MQTTtoRF2/CODE_8233372/UNIT_0/PERIOD_272 -m/
 #include "User_config.h"
 
 #ifdef ZgatewayRF2
+#  include "TheengsCommon.h"
+#  include "TheengsUtils.h"
+#  include "config_RF.h"
 
 #  ifdef ZradioCC1101
 #    include <ELECHOUSE_CC1101_SRC_DRV.h>
@@ -44,6 +47,9 @@ sudo mosquitto_pub -t home/commands/MQTTtoRF2/CODE_8233372/UNIT_0/PERIOD_272 -m/
 #  include <NewRemoteReceiver.h>
 #  include <NewRemoteTransmitter.h>
 
+void disableCurrentReceiver();
+void enableActiveReceiver();
+
 struct RF2rxd {
   unsigned int period;
   unsigned long address;
@@ -55,7 +61,12 @@ struct RF2rxd {
 
 RF2rxd rf2rd;
 
+extern void initCC1101();
+
 #  ifdef ZmqttDiscovery
+#    include "config_mqttDiscovery.h"
+extern String getUniqueId(String name, String sufix);
+
 //Register for autodiscover in Home Assistant
 void RF2toMQTTdiscovery(JsonObject& data) {
   Log.trace(F("switchRF2Discovery" CR));
@@ -310,10 +321,10 @@ void enableRF2Receive() {
 
   Log.notice(F("RF_EMITTER_GPIO: %d " CR), RF_EMITTER_GPIO);
   Log.notice(F("RF_RECEIVER_GPIO: %d " CR), RF_RECEIVER_GPIO);
-  Log.trace(F("ZgatewayRF2 command topic: %s%s%s" CR), mqtt_topic, gateway_name, subjectMQTTtoRF2);
+  Log.trace(F("gatewayRF2 command topic: %s%s%s" CR), mqtt_topic, gateway_name, subjectMQTTtoRF2);
   pinMode(RF_EMITTER_GPIO, OUTPUT);
   digitalWrite(RF_EMITTER_GPIO, LOW);
-  Log.trace(F("ZgatewayRF2 setup done " CR));
+  Log.trace(F("gatewayRF2 setup done " CR));
 }
 
 #endif

main/gatewayRFM69.cpp

@@ -31,15 +31,21 @@
 #include "User_config.h"
 
 #ifdef ZgatewayRFM69
-
 #  include <EEPROM.h>
 #  include <RFM69.h> //https://www.github.com/lowpowerlab/rfm69
 
-char RadioConfig[128];
+#  include "TheengsCommon.h"
+#  include "config_RFM69.h"
 
-// vvvvvvvvv Global Configuration vvvvvvvvvvv
+static char RadioConfig[128];
+static const char* PROGMEM ENCRYPTKEY = RFM69_ENCRYPTKEY;
+static const char* PROGMEM MDNS_NAME = RFM69_MDNS_NAME;
+static const char* PROGMEM MQTT_BROKER = RFM69_MQTT_BROKER;
+static const char* PROGMEM RFM69AP_NAME = RFM69_RFM69AP_NAME
 
-struct _GLOBAL_CONFIG {
+    // vvvvvvvvv Global Configuration vvvvvvvvvvv
+
+    struct _GLOBAL_CONFIG {
   uint32_t checksum;
   char rfmapname[32];
   char encryptkey[16 + 1];
@@ -75,8 +81,8 @@ void eeprom_setup() {
     memset(pGC, 0, sizeof(*pGC));
     strcpy_P(pGC->encryptkey, ENCRYPTKEY);
     strcpy_P(pGC->rfmapname, RFM69AP_NAME);
-    pGC->networkid = NETWORKID;
+    pGC->networkid = RFM69_NETWORKID;
-    pGC->nodeid = NODEID;
+    pGC->nodeid = RFM69_NODEID;
     pGC->powerlevel = ((IS_RFM69HCW) ? 0x80 : 0x00) | POWER_LEVEL;
     pGC->rfmfrequency = FREQUENCY;
     pGC->checksum = gc_checksum();
@@ -97,7 +103,7 @@ void setupRFM69(void) {
 
   // Initialize radio
   if (!radio.initialize(pGC->rfmfrequency, pGC->nodeid, pGC->networkid)) {
-    Log.error(F("ZgatewayRFM69 initialization failed" CR));
+    Log.error(F("gatewayRFM69 initialization failed" CR));
   }
 
   if (GC_IS_RFM69HCW) {
@@ -125,7 +131,7 @@ void setupRFM69(void) {
       freq = -1;
       break;
   }
-  Log.notice(F("ZgatewayRFM69 Listening and transmitting at: %d" CR), freq);
+  Log.notice(F("gatewayRFM69 Listening and transmitting at: %d" CR), freq);
 
   size_t len = snprintf_P(RadioConfig, sizeof(RadioConfig), JSONtemplate,
                           freq, GC_IS_RFM69HCW, pGC->networkid, GC_POWER_LEVEL);

main/gatewayRTL_433.cpp

@@ -26,19 +26,22 @@
     You should have received a copy of the GNU General Public License
     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#ifdef ZgatewayRTL_433
 
-#  include <ArduinoJson.h>
+#include "User_config.h"
-#  include <config_RF.h>
+
+#ifdef ZgatewayRTL_433
 #  include <rtl_433_ESP.h>
 
-#  include "ArduinoLog.h"
+#  include "TheengsCommon.h"
-#  include "User_config.h"
+#  include "config_RF.h"
 #  ifdef ZmqttDiscovery
 #    include "config_mqttDiscovery.h"
 #  endif
 
-char messageBuffer[JSON_MSG_BUFFER];
+#  include <vector>
+
+static char messageBuffer[JSON_MSG_BUFFER];
+rtl_433_ESP rtl_433;
 
 #  ifdef ZmqttDiscovery
 SemaphoreHandle_t semaphorecreateOrUpdateDeviceRTL_433;
@@ -314,8 +317,8 @@ void setupRTL_433() {
   semaphorecreateOrUpdateDeviceRTL_433 = xSemaphoreCreateBinary();
   xSemaphoreGive(semaphorecreateOrUpdateDeviceRTL_433);
 #  endif
-  Log.trace(F("ZgatewayRTL_433 command topic: %s%s%s" CR), mqtt_topic, gateway_name, subjectMQTTtoRFset);
+  Log.trace(F("gatewayRTL_433 command topic: %s%s%s" CR), mqtt_topic, gateway_name, subjectMQTTtoRFset);
-  Log.notice(F("ZgatewayRTL_433 setup done " CR));
+  Log.notice(F("gatewayRTL_433 setup done " CR));
 }
 
 void RTL_433Loop() {

main/gatewaySERIAL.cpp

@@ -28,6 +28,8 @@
 #include "User_config.h"
 
 #ifdef ZgatewaySERIAL
+#  include "TheengsCommon.h"
+#  include "config_SERIAL.h"
 
 #  ifndef SERIAL_UART // software serial mode
 #    include <SoftwareSerial.h>
@@ -48,6 +50,8 @@ const TickType_t semaphoreTimeout = pdMS_TO_TICKS(1000); // 1 second timeout
 #    define SEMAPHORE_SERIAL_GIVE
 #  endif
 
+extern void receivingDATA(const char* topicOri, const char* datacallback);
+
 // use pointer to stream class for serial communication to make code
 // compatible with both softwareSerial as hardwareSerial.
 Stream* SERIALStream = NULL;
@@ -64,6 +68,10 @@ const unsigned long maxHeartbeatInterval = 60000; // Maximum interval of 1 minut
 unsigned long heartbeatInterval = 5000; // 5 seconds
 bool isOverflow = false;
 
+static void sendHeartbeat();
+static void sendHeartbeatAck();
+static void handleHeartbeat();
+
 void setupSERIAL() {
 //Initalize serial port
 #  ifdef SERIAL_UART // Hardware serial
@@ -130,7 +138,7 @@ void setupSERIAL() {
     SERIALStream->read();
 
   Log.notice(F("SERIALBaud: %d" CR), SERIALBaud);
-  Log.trace(F("ZgatewaySERIAL setup done" CR));
+  Log.trace(F("gatewaySERIAL setup done" CR));
 }
 
 #  if SERIALtoMQTTmode == 0 // Convert received data to single MQTT topic

main/gatewaySRFB.cpp

@@ -31,12 +31,19 @@
 #include "User_config.h"
 
 #ifdef ZgatewaySRFB
+#  include <TheengsUtils.h>
+
+#  include "TheengsCommon.h"
+#  include "config_SRFB.h"
 
 unsigned char _uartbuf[RF_MESSAGE_SIZE + 3] = {0};
 unsigned char _uartpos = 0;
 
+void _rfbDecode();
+void _rfbAck();
+
 void setupSRFB() {
-  Log.trace(F("ZgatewaySRFB setup done " CR));
+  Log.trace(F("gatewaySRFB setup done " CR));
   Log.trace(F("Serial Baud: %l" CR), SERIAL_BAUD);
 }
 

main/gatewayWeatherStation.cpp

@@ -27,10 +27,14 @@
 
 #ifdef ZgatewayWeatherStation
 #  include <WeatherStationDataRx.h>
+
+#  include "TheengsCommon.h"
+#  include "config_WeatherStation.h"
+
 WeatherStationDataRx wsdr(RF_WS_RECEIVER_GPIO, true);
 
 void PairedDeviceAdded(byte newID) {
-  Serial.printf("ZgatewayWeatherStation: New device paired %d\r\n", newID);
+  Serial.printf("gatewayWeatherStation: New device paired %d\r\n", newID);
   StaticJsonDocument<JSON_MSG_BUFFER> RFdataBuffer;
   JsonObject RFdata = RFdataBuffer.to<JsonObject>();
   RFdata["sensor"] = newID;
@@ -44,7 +48,7 @@ void setupWeatherStation() {
   Log.notice(F("RF_WS_RECEIVER_GPIO %d" CR), RF_WS_RECEIVER_GPIO);
   wsdr.begin();
   wsdr.pair(NULL, PairedDeviceAdded);
-  Log.trace(F("ZgatewayWeatherStation setup done " CR));
+  Log.trace(F("gatewayWeatherStation setup done " CR));
 }
 
 void sendWindSpeedData(byte id, float wind_speed, byte battery_status) {

main/main.cpp

@@ -25,22 +25,16 @@
     You should have received a copy of the GNU General Public License
     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include "User_config.h"
 
-enum GatewayState {
+#include <PicoMQTT.h>
-  WAITING_ONBOARDING,
+
-  ONBOARDING,
+#include <memory>
-  OFFLINE,
+#include <queue>
-  NTWK_CONNECTED,
+
-  BROKER_CONNECTED,
+#include "LEDManager.h"
-  PROCESSING,
+#include "TheengsCommon.h"
-  NTWK_DISCONNECTED,
+#include "TheengsUtils.h"
-  BROKER_DISCONNECTED,
+
-  LOCAL_OTA_IN_PROGRESS,
-  REMOTE_OTA_IN_PROGRESS,
-  SLEEPING,
-  ERROR
-};
 GatewayState gatewayState = GatewayState::WAITING_ONBOARDING;
 
 // Macros and structure to enable the duplicates removing on the following gateways
@@ -56,6 +50,12 @@ ReceivedSignal receivedSignal[] = {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0
 #  define struct_size (sizeof(receivedSignal) / sizeof(ReceivedSignal))
 #endif
 
+int queueLength = -1; // We want to give one cycle of the loop before starting modules that are big msgs producers (example BT), to avoid queue overloading
+unsigned long queueLengthSum = 0;
+unsigned long blockedMessages = 0;
+unsigned long receivedMessages = 0;
+int maxQueueLength = 0;
+
 //Time used to wait for an interval before measures
 unsigned long timer_sys_measures = 0;
 
@@ -65,34 +65,12 @@ unsigned long timer_sys_checks = 0;
 // First Start of offline mode modules
 bool firstStart = true;
 
-#define ARDUINOJSON_USE_LONG_LONG     1
-#define ARDUINOJSON_ENABLE_STD_STRING 1
-
-#include <queue>
-int queueLength = -1; // We want to give one cycle of the loop before starting modules that are big msgs producers (example BT), to avoid queue overloading
-unsigned long queueLengthSum = 0;
-unsigned long blockedMessages = 0;
-unsigned long receivedMessages = 0;
-int maxQueueLength = 0;
-#ifndef QueueSize
-#  define QueueSize 18
-#endif
-
 /**
  * Deep-sleep for the ESP8266 & ESP32 we need some form of indicator that we have posted the measurements and am ready to deep sleep.
  * Set this to true in the sensor code after publishing the measurement.
  */
 bool ready_to_sleep = false;
 
-#include <ArduinoJson.h>
-#include <ArduinoLog.h>
-#include <PicoMQTT.h>
-
-#include <memory>
-
-#include "LEDManager.h"
-#include "TheengsUtils.h"
-
 LEDManager ledManager;
 
 struct JsonBundle {
@@ -112,12 +90,16 @@ SemaphoreHandle_t xMqttMutex;
 StaticJsonDocument<JSON_MSG_BUFFER> modulesBuffer;
 JsonArray modules = modulesBuffer.to<JsonArray>();
 bool ethConnected = false;
+char mqtt_topic[parameters_size + 1] = Base_Topic;
+char gateway_name[parameters_size + 1] = Gateway_Name;
+unsigned long lastDiscovery = 0;
+#if !MQTT_BROKER_MODE
+ss_cnt_parameters cnt_parameters_array[cnt_parameters_array_size] = CNT_PARAMS_ARR;
+#endif
 
-#ifndef ZgatewayGFSunInverter
+#if defined(ESP32)
-// Arduino IDE compiles, it automatically creates all the header declarations for all the functions you have in your *.ino file.
+#  include <Preferences.h>
-// Unfortunately it ignores #if directives.
+Preferences preferences;
-// This is a simple workaround for this problem.
-struct GfSun2000Data {};
 #endif
 
 // Modules config inclusion
@@ -235,9 +217,53 @@ struct GfSun2000Data {};
 #if defined(ZgatewaySERIAL)
 #  include "config_SERIAL.h"
 #endif
+#if defined(USE_BLUFI) && defined(ESP32)
+extern bool isBlufiConnected();
+extern bool isStaConnecting();
+extern bool startBlufi();
+extern bool stopBlufi();
+#endif
 /*------------------------------------------------------------------------*/
 
+bool pub(JsonObject& data);
+bool pubMQTT(const char* topic, const char* payload);
+bool pubMQTT(const char* topic, const char* payload, bool retainFlag);
+bool pubMQTT(String topic, const char* payload);
+bool pubMQTT(const char* topic, unsigned long payload);
+bool pubMQTT(const char* topic, unsigned long long payload);
+bool pubMQTT(const char* topic, String payload);
+bool pubMQTT(String topic, String payload);
+bool pubMQTT(String topic, int payload);
+bool pubMQTT(String topic, unsigned long long payload);
+bool pubMQTT(String topic, float payload);
+bool pubMQTT(const char* topic, float payload);
+bool pubMQTT(const char* topic, int payload);
+bool pubMQTT(const char* topic, unsigned int payload);
+bool pubMQTT(const char* topic, long payload);
+bool pubMQTT(const char* topic, double payload);
+bool pubMQTT(String topic, unsigned long payload);
+void checkButton();
+void ESPRestart(byte reason);
+void eraseConfig();
+void readCntParameters(int index);
+void saveConfig();
+void receivingDATA(const char* topicOri, const char* datacallback);
+void updateAndHandleLEDsTask(void* pvParameters);
+void updateAndHandleLEDsTask();
+bool loadConfigFromFlash();
+void setupWiFiManager();
+void setOTA();
+void setupCommonRF();
+void sleep();
+bool checkForUpdates();
+String stateMeasures();
+String stateRFMeasures();
+int getMin();
+void XtoRFset(const char* topicOri, JsonObject& RFdata);
+void MQTTHttpsFWUpdate(const char* topicOri, JsonObject& HttpsFwUpdateData);
+void setup_ethernet_esp32();
 void setupTLS(int index = CNT_DEFAULT_INDEX);
+void XtoSYS(const char* topicOri, JsonObject& SYSdata);
 
 char ota_pass[parameters_size] = gw_password;
 #ifdef USE_MAC_AS_GATEWAY_NAME
@@ -256,7 +282,7 @@ SYSConfig_s SYSConfig;
 
 bool failSafeMode = false;
 bool ProcessLock = true; // Process lock when we want to use a critical function like OTA for example
-static bool mqttSetupPending = true;
+bool mqttSetupPending = true;
 static int cnt_index = CNT_DEFAULT_INDEX;
 
 #ifdef ESP32
@@ -367,20 +393,6 @@ std::unique_ptr< ::Client> eClient;
 std::unique_ptr<PicoMQTT::Client> mqtt;
 #endif
 
-template <typename T> // Declared here to avoid pre-compilation issue (missing "template" in auto declaration by pio)
-void Config_update(JsonObject& data, const char* key, T& var);
-template <typename T>
-void Config_update(JsonObject& data, const char* key, T& var) {
-  if (data.containsKey(key)) {
-    if (var != data[key].as<T>()) {
-      var = data[key].as<T>();
-      Log.notice(F("Config %s changed to: %T" CR), key, data[key].as<T>());
-    } else {
-      Log.notice(F("Config %s unchanged, currently: %T" CR), key, data[key].as<T>());
-    }
-  }
-}
-
 /*
  * Dispatch json messages towards the communication layer
  *
@@ -419,7 +431,7 @@ bool jsonDispatch(JsonObject& data) {
 }
 
 // Add a document to the queue
-boolean enqueueJsonObject(const StaticJsonDocument<JSON_MSG_BUFFER>& jsonDoc, int timeout) {
+bool enqueueJsonObject(const StaticJsonDocument<JSON_MSG_BUFFER>& jsonDoc, int timeout) {
   receivedMessages++;
   if (jsonDoc.size() == 0) {
     Log.error(F("Empty JSON, skipping" CR));
@@ -1351,7 +1363,7 @@ void setup() {
   Serial.end();
   Serial.begin(SERIAL_BAUD, SERIAL_8N1, SERIAL_TX_ONLY); // enable on ESP8266 to free some pin
 #  endif
-#elif ESP32
+#elif defined(ESP32)
   xTaskCreate(updateAndHandleLEDsTask, "updateAndHandleLEDsTask", 2500, NULL, 1, NULL);
   xQueueMutex = xSemaphoreCreateMutex();
   xMqttMutex = xSemaphoreCreateMutex();
@@ -1405,8 +1417,10 @@ void setup() {
 #endif
 
 #if defined(ESPWifiManualSetup)
+  extern void setupWiFiFromBuild();
   setupWiFiFromBuild();
 #else
+  WiFi.mode(WIFI_STA);
   if (loadConfigFromFlash()) { // Config present
     Log.notice(F("Config loaded from flash" CR));
 #  ifdef ESP32_ETHERNET
@@ -1421,6 +1435,7 @@ void setup() {
 
 #  if SELF_TEST
     // Check serial input to trigger a Self Test sequence if required
+    extern void checkSerial();
     checkSerial();
 #  endif
 
@@ -1503,21 +1518,12 @@ void setup() {
 #endif
 #ifdef ZgatewayRF
   modules.add(ZgatewayRF);
-#  define ACTIVE_RECEIVER ACTIVE_RF
 #endif
 #ifdef ZgatewayRF2
   modules.add(ZgatewayRF2);
-#  ifdef ACTIVE_RECEIVER
-#    undef ACTIVE_RECEIVER
-#  endif
-#  define ACTIVE_RECEIVER ACTIVE_RF2
 #endif
 #ifdef ZgatewayPilight
   modules.add(ZgatewayPilight);
-#  ifdef ACTIVE_RECEIVER
-#    undef ACTIVE_RECEIVER
-#  endif
-#  define ACTIVE_RECEIVER ACTIVE_PILIGHT
 #endif
 #ifdef ZgatewayWeatherStation
   setupWeatherStation();
@@ -1568,10 +1574,6 @@ void setup() {
   modules.add(ZactuatorPWM);
 #endif
 #ifdef ZactuatorSomfy
-#  ifdef ACTIVE_RECEIVER
-#    undef ACTIVE_RECEIVER
-#  endif
-#  define ACTIVE_RECEIVER ACTIVE_NONE
   setupSomfy();
   modules.add(ZactuatorSomfy);
 #endif
@@ -1599,10 +1601,6 @@ void setup() {
   setupSHTC3();
 #endif
 #ifdef ZgatewayRTL_433
-#  ifdef ACTIVE_RECEIVER
-#    undef ACTIVE_RECEIVER
-#  endif
-#  define ACTIVE_RECEIVER ACTIVE_RTL
   setupRTL_433();
   modules.add(ZgatewayRTL_433);
 #endif
@@ -1722,6 +1720,7 @@ void setupTLS(int index) {
 #    if AWS_IOT
     if (strcmp(cnt_parameters_array[index].mqtt_port, "443") == 0) {
       Log.notice(F("Using ALPN" CR));
+      static const char* alpnProtocols[] = ALPN_PROTOCOLS;
       sClient->setAlpnProtocols(alpnProtocols);
     }
 #    endif
@@ -1889,6 +1888,7 @@ void blockingWaitForReset() {
         Log.notice(F("Button Held" CR));
 // Switching off the relay during reset or failsafe operations
 #    ifdef ZactuatorONOFF
+        extern void ActuatorTrigger();
         uint8_t level = digitalRead(ACTUATOR_ONOFF_GPIO);
         if (level == ACTUATOR_ON) {
           ActuatorTrigger();
@@ -2192,7 +2192,6 @@ bool loadConfigFromFlash() {
 
 void setupWiFiManager() {
   delay(10);
-  WiFi.mode(WIFI_STA);
 
 #  ifdef USE_MAC_AS_GATEWAY_NAME
   String s = WiFi.macAddress();
@@ -2497,6 +2496,7 @@ void loop() {
   }
   if (firstStart) {
 #ifdef ZgatewaySERIAL
+    extern bool isSerialReady();
     if (SYSConfig.serial && isSerialReady()) {
 #  ifdef ZgatewayBT
       BTProcessLock = !BTConfig.enabled;
@@ -2569,6 +2569,7 @@ void loop() {
       stateSSD1306Display();
 #endif
 #ifdef ZgatewayLORA
+      extern String stateLORAMeasures();
       stateLORAMeasures();
 #endif
 #if defined(ZgatewayRTL_433) || defined(ZgatewayPilight) || defined(ZgatewayRF) || defined(ZgatewayRF2) || defined(ZactuatorSomfy)
@@ -2604,6 +2605,7 @@ void loop() {
     MeasureLightIntensity(); //Addon to measure Light Intensity with a BH1750
 #endif
 #ifdef ZsensorMQ2
+    extern void MeasureGasMQ2();
     MeasureGasMQ2();
 #endif
 #ifdef ZsensorTEMT6000
@@ -2704,6 +2706,7 @@ void loop() {
   if (ready_to_sleep) {
     sleep();
   }
+  delay(1);
 }
 
 /**
@@ -2979,6 +2982,7 @@ void receivingDATA(const char* topicOri, const char* datacallback) {
     //Log.notice(F("[ MQTT->OMG ]: %s" CR), buffer.c_str());
 
 #ifdef ZgatewayPilight // ZgatewayPilight is only defined with json publishing due to its numerous parameters
+    extern void XtoPilight(const char* topicOri, JsonObject& RFdata);
     XtoPilight(strTopicOri.c_str(), jsondata);
 #endif
 #if defined(ZgatewayRTL_433) || defined(ZgatewayPilight) || defined(ZgatewayRF) || defined(ZgatewayRF2) || defined(ZactuatorSomfy)
@@ -3016,6 +3020,7 @@ void receivingDATA(const char* topicOri, const char* datacallback) {
     XtoPWM(strTopicOri.c_str(), jsondata);
 #  endif
 #  if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK) || defined(ZboardM5TOUGH)
+    void XtoM5(const char* topicOri, JsonObject& M5data);
     XtoM5(strTopicOri.c_str(), jsondata);
 #  endif
 #  if defined(ZdisplaySSD1306)
@@ -3076,8 +3081,7 @@ void receivingDATA(const char* topicOri, const char* datacallback) {
 String latestVersion;
 #  ifdef ESP32
 #    include <HTTPClient.h>
-
+#    include <HTTPUpdate.h>
-#    include "zzHTTPUpdate.h"
 
 #    if CHECK_OTA_UPDATE
 /**
@@ -3358,6 +3362,7 @@ void XtoSYS(const char* topicOri, JsonObject& SYSdata) { // json object decoding
         SYSConfig.rgbbrightness = TheengsUtils::round2(SYSdata["rgbb"]);
         ledManager.setBrightness(SYSConfig.rgbbrightness);
 #  ifdef ZactuatorONOFF
+        extern void updatePowerIndicator();
         updatePowerIndicator();
 #  endif
         Log.notice(F("RGB brightness: %d" CR), SYSConfig.rgbbrightness);
@@ -3577,8 +3582,10 @@ void XtoSYS(const char* topicOri, JsonObject& SYSdata) { // json object decoding
           lastDiscovery = millis();
         SYSConfig.discovery = SYSdata["disc"];
         publishState = true;
-        if (SYSConfig.discovery)
+        if (SYSConfig.discovery) {
+          extern void pubMqttDiscovery();
           pubMqttDiscovery();
+        }
       } else {
         Log.warning(F("Discovery command not a boolean" CR));
       }

main/mqttDiscovery.cpp

@@ -24,14 +24,107 @@
     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include <ArduinoJson.h>
-#include <ArduinoLog.h>
-
 #include "User_config.h"
 
 #ifdef ZmqttDiscovery
+#  include "TheengsCommon.h"
+
+#  ifdef ESP8266
+#    include <ESP8266WiFi.h>
+#  elif defined(ESP32)
+#    include <WiFi.h>
+
+#    include "esp_mac.h"
+#  endif
+#  ifdef ESP32_ETHERNET
+#    include <ETH.h>
+#  endif
 #  include "config_mqttDiscovery.h"
 
+extern bool ethConnected;
+extern JsonArray modules;
+
+char discovery_prefix[parameters_size + 1] = discovery_Prefix;
+// From https://github.com/home-assistant/core/blob/d7ac4bd65379e11461c7ce0893d3533d8d8b8cbf/homeassistant/const.py#L225
+// List of classes available in Home Assistant
+const char* availableHASSClasses[] = {"battery_charging",
+                                      "battery",
+                                      "carbon_dioxide",
+                                      "carbon_monoxide",
+                                      "current",
+                                      "data_size",
+                                      "distance",
+                                      "door",
+                                      "duration",
+                                      "energy",
+                                      "enum",
+                                      "gas",
+                                      "humidity",
+                                      "illuminance",
+                                      "irradiance",
+                                      "lock",
+                                      "motion",
+                                      "moving",
+                                      "pm1",
+                                      "pm10",
+                                      "pm25",
+                                      "power_factor",
+                                      "power",
+                                      "precipitation_intensity",
+                                      "precipitation",
+                                      "pressure",
+                                      "problem",
+                                      "restart",
+                                      "signal_strength",
+                                      "sound_pressure",
+                                      "temperature",
+                                      "timestamp",
+                                      "voltage",
+                                      "water",
+                                      "weight",
+                                      "wind_speed",
+                                      "window"};
+
+// From https://github.com/home-assistant/core/blob/d7ac4bd65379e11461c7ce0893d3533d8d8b8cbf/homeassistant/const.py#L379
+// List of units available in Home Assistant
+const char* availableHASSUnits[] = {"W",
+                                    "kW",
+                                    "V",
+                                    "kWh",
+                                    "A",
+                                    "W",
+                                    "°C",
+                                    "°F",
+                                    "ms",
+                                    "s",
+                                    "min",
+                                    "hPa",
+                                    "L",
+                                    "kg",
+                                    "lb",
+                                    "µS/cm",
+                                    "ppm",
+                                    "μg/m³",
+                                    "m³",
+                                    "mg/m³",
+                                    "m/s²",
+                                    "mV",
+                                    "lx",
+                                    "Ω",
+                                    "%",
+                                    "bar",
+                                    "bpm",
+                                    "dB",
+                                    "dBm",
+                                    "B",
+                                    "UV index",
+                                    "m/s",
+                                    "km/h",
+                                    "°",
+                                    "mm",
+                                    "mm/h",
+                                    "cm"};
+
 String getMacAddress() {
   uint8_t baseMac[6];
   char baseMacChr[13] = {0};
@@ -53,9 +146,10 @@ String getUniqueId(String name, String sufix) {
 }
 
 #  if defined(ZgatewayBT) || defined(SecondaryModule)
+#    include "config_BT.h"
 /**
  * Create a discover messages form a list of attribute
- * 
+ *
  * @param mac the MAC address
  * @param sensorList[][0] = component type
  * @param sensorList[][1] = name
@@ -94,15 +188,15 @@ void createDiscoveryFromList(const char* mac,
 #  endif
 
 /**
- * @brief Announce that the Gateway have the ability to raise Trigger. 
+ * @brief Announce that the Gateway have the ability to raise Trigger.
- * This function provide the configuration of the MQTT Device trigger ( @see https://www.home-assistant.io/integrations/device_trigger.mqtt/ ). 
+ * This function provide the configuration of the MQTT Device trigger ( @see https://www.home-assistant.io/integrations/device_trigger.mqtt/ ).
- * All messages published by this function will be interpreted as configuration messages of Gateway Triggers. 
+ * All messages published by this function will be interpreted as configuration messages of Gateway Triggers.
  * Instead, all messages published on the "triggerTopic" will be interpreted as Gateway trigger.
  *
  * @param triggerTopic          Mandatory - The MQTT topic subscribed to receive trigger events.
  * @param type                  The type of the trigger, e.g. button_short_press. Entries supported by the HA Frontend: button_short_press, button_short_release, button_long_press, button_long_release, button_double_press, button_triple_press, button_quadruple_press, button_quintuple_press. If set to an unsupported value, will render as subtype type, e.g. button_1 spammed with type set to spammed and subtype set to button_1
  * @param subtype               The subtype of the trigger, e.g. button_1. Entries supported by the HA frontend: turn_on, turn_off, button_1, button_2, button_3, button_4, button_5, button_6. If set to an unsupported value, will render as subtype type, e.g. left_button pressed with type set to button_short_press and subtype set to left_button
- * @param object_id             The object_id of the trigger. 
+ * @param object_id             The object_id of the trigger.
  * @param value_template        The template to render the value of the trigger. The template can use the variables trigger.id, trigger.type, trigger.subtype, trigger.payload, trigger.payload_json, trigger.topic, trigger.timestamp, trigger.value, trigger.value_json. The template can be a string or a JSON object. If the template is a JSON object, it must be a valid JSON object. If the template is a string, it will be rendered as a string. If the template is a JSON object, it will be rendered as a JSON object.
  */
 void announceGatewayTrigger(const char* triggerTopic,
@@ -116,7 +210,7 @@ void announceGatewayTrigger(const char* triggerTopic,
 
   /**
    * The type of automation, must be ‘trigger’.
-   * @see https://www.home-assistant.io/integrations/device_trigger.mqtt/#automation_type 
+   * @see https://www.home-assistant.io/integrations/device_trigger.mqtt/#automation_type
    */
   sensor["automation_type"] = "trigger";
 
@@ -146,7 +240,7 @@ void announceGatewayTrigger(const char* triggerTopic,
   }
 
   /**
-   * The type of the trigger, e.g. button_short_press. 
+   * The type of the trigger, e.g. button_short_press.
    * Entries supported by the HA frontend: button_short_press, button_short_release, button_long_press, button_long_release, button_double_press, button_triple_press, button_quadruple_press, button_quintuple_press.
    * If set to an unsupported value, will render as subtype type, e.g. button_1 spammed with type set to spammed and subtype set to button_1
    */
@@ -157,8 +251,8 @@ void announceGatewayTrigger(const char* triggerTopic,
   }
 
   /**
-   * The subtype of the trigger, e.g. turn_on. 
+   * The subtype of the trigger, e.g. turn_on.
-   * Entries supported by the frontend: turn_on, turn_off, button_1, button_2, button_3, button_4, button_5, button_6. 
+   * Entries supported by the frontend: turn_on, turn_off, button_1, button_2, button_3, button_4, button_5, button_6.
    * If set to an unsupported value, will render as subtype type, e.g. left_button pressed with type set to button_short_press and subtype set to left_button
    */
   if (subtype && subtype[0] != 0) {
@@ -187,7 +281,7 @@ void announceGatewayTrigger(const char* triggerTopic,
   }
 
   /*
-  * A list of connections of the device to the outside world as a list of tuples [connection_type, connection_identifier]. 
+  * A list of connections of the device to the outside world as a list of tuples [connection_type, connection_identifier].
   * For example the MAC address of a network interface: "connections": [["mac", "02:5b:26:a8:dc:12"]].
   */
   JsonArray connections = device.createNestedArray("connections");
@@ -223,12 +317,12 @@ void announceGatewayTrigger(const char* triggerTopic,
     sensor["value_template"] = String(value_template);
   }
 
-  /* Publish on the topic 
+  /* Publish on the topic
-     The discovery topic needs to be: <discovery_prefix>/device_automation/[<node_id>/]<object_id>/config. 
+     The discovery topic needs to be: <discovery_prefix>/device_automation/[<node_id>/]<object_id>/config.
-     
+
-     Note that only one trigger may be defined per unique discovery topic. 
+     Note that only one trigger may be defined per unique discovery topic.
      Also note that the combination of type and subtype should be unique for a device.
-   
+
    */
 
   String topic_to_publish = String(discovery_prefix) + "/device_automation/" + String(unique_id) + "/" + object_id + "/config";
@@ -254,7 +348,7 @@ std::string remove_substring(std::string s, const std::string& p) {
 
 /**
  * @brief Generate message and publish it on an MQTT discovery explorer. For HA @see https://www.home-assistant.io/docs/mqtt/discovery/
- * 
+ *
  * @param sensor_type the Type
  * @param st_topic set state topic,
  * @param s_name set name,
@@ -268,15 +362,15 @@ std::string remove_substring(std::string s, const std::string& p) {
  * @param off_delay set off_delay
  * @param payload_available set payload_available,
  * @param payload_not_available set payload_not_available
- * @param gateway_entity set is a gateway entity, 
+ * @param gateway_entity set is a gateway entity,
  * @param cmd_topic set command topic
- * @param device_name set device name, 
+ * @param device_name set device name,
- * @param device_manufacturer set device manufacturer, 
+ * @param device_manufacturer set device manufacturer,
- * @param device_model set device model, 
+ * @param device_model set device model,
- * @param device_id set device(BLE)/entity(RTL_433) identification, 
+ * @param device_id set device(BLE)/entity(RTL_433) identification,
  * @param retainCmd set retain
  * @param state_class set state class
- * 
+ *
  * */
 void createDiscovery(const char* sensor_type,
                      const char* st_topic, const char* s_name, const char* unique_id,
@@ -644,6 +738,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZdisplaySSD1306
+#    include "config_SSD1306.h"
   createDiscovery("switch", //set Type
                   subjectSSD1306toMQTT, "SSD1306: Control", (char*)getUniqueId("onstate", "").c_str(), //set state_topic,name,uniqueId
                   will_Topic, "", "{{ value_json.onstate }}", //set availability_topic,device_class,value_template,
@@ -795,6 +890,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorBME280
+#    include "config_BME280.h"
 #    define BMEparametersCount 5
   Log.trace(F("bme280Discovery" CR));
   char* BMEsensor[BMEparametersCount][8] = {
@@ -819,6 +915,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorHTU21
+#    include "config_HTU21.h"
 #    define HTUparametersCount 2
   Log.trace(F("htu21Discovery" CR));
   char* HTUsensor[HTUparametersCount][8] = {
@@ -856,6 +953,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorAHTx0
+#    include "config_AHTx0.h"
 #    define AHTparametersCount 2
   Log.trace(F("AHTx0Discovery" CR));
   char* AHTsensor[AHTparametersCount][8] = {
@@ -877,6 +975,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorDHT
+#    include "config_DHT.h"
 #    define DHTparametersCount 2
   Log.trace(F("DHTDiscovery" CR));
   char* DHTsensor[DHTparametersCount][8] = {
@@ -899,6 +998,8 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorADC
+#    include "config_ADC.h"
+
   Log.trace(F("ADCDiscovery" CR));
   char* ADCsensor[8] = {"sensor", "adc", "", "", jsonAdc, "", "", ""};
   //component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
@@ -915,6 +1016,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorBH1750
+#    include "config_BH1750.h"
 #    define BH1750parametersCount 3
   Log.trace(F("BH1750Discovery" CR));
   char* BH1750sensor[BH1750parametersCount][8] = {
@@ -938,6 +1040,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorMQ2
+#    include "config_MQ2.h"
 #    define MQ2parametersCount 2
   Log.trace(F("MQ2Discovery" CR));
   char* MQ2sensor[MQ2parametersCount][8] = {
@@ -959,6 +1062,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorTEMT6000
+#    include "config_TEMT6000.h"
 #    define TEMT6000parametersCount 3
   Log.trace(F("TEMT6000Discovery" CR));
   char* TEMT6000sensor[TEMT6000parametersCount][8] = {
@@ -982,6 +1086,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorTSL2561
+#    include "config_TSL2561.h"
 #    define TSL2561parametersCount 3
   Log.trace(F("TSL2561Discovery" CR));
   char* TSL2561sensor[TSL2561parametersCount][8] = {
@@ -1005,6 +1110,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorHCSR501
+#    include "config_HCSR501.h"
   Log.trace(F("HCSR501Discovery" CR));
   char* HCSR501sensor[8] = {"binary_sensor", "hcsr501", "", "motion", jsonPresence, "true", "false", ""};
   //component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
@@ -1021,6 +1127,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorGPIOInput
+#    include "config_GPIOInput.h"
   Log.trace(F("GPIOInputDiscovery" CR));
   char* GPIOInputsensor[8] = {"binary_sensor", "GPIOInput", "", "", jsonGpio, INPUT_GPIO_ON_VALUE, INPUT_GPIO_OFF_VALUE, ""};
   //component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
@@ -1037,6 +1144,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorINA226
+#    include "config_INA226.h"
 #    define INA226parametersCount 3
   Log.trace(F("INA226Discovery" CR));
   char* INA226sensor[INA226parametersCount][8] = {
@@ -1060,11 +1168,13 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorDS1820
+  extern void pubOneWire_HADiscovery();
   // Publish any DS1820 sensors found on the OneWire bus
   pubOneWire_HADiscovery();
 #  endif
 
 #  ifdef ZactuatorONOFF
+#    include "config_ONOFF.h"
   Log.trace(F("actuatorONOFFDiscovery" CR));
   char* actuatorONOFF[8] = {"switch", "actuatorONOFF", "", "", "{{ value_json.cmd }}", "{\"cmd\":1}", "{\"cmd\":0}", ""};
   //component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
@@ -1082,6 +1192,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZsensorRN8209
+#    include "config_RN8209.h"
 #    define RN8209parametersCount 4
   Log.trace(F("RN8209Discovery" CR));
   char* RN8209sensor[RN8209parametersCount][8] = {
@@ -1130,6 +1241,8 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZgatewayRF2
+#    include "config_RF.h"
+
   // Sensor to display RF received value
   Log.trace(F("gatewayRF2Discovery" CR));
   char* gatewayRF2[8] = {"sensor", "gatewayRF2", "", "", jsonAddress, "", "", ""};
@@ -1152,6 +1265,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZgatewayRFM69
+#    include "config_RFM69.h"
   // Sensor to display RF received value
   Log.trace(F("gatewayRFM69Discovery" CR));
   char* gatewayRFM69[8] = {"sensor", "gatewayRFM69", "", "", jsonVal, "", "", ""};
@@ -1169,6 +1283,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZgatewayLORA
+#    include "config_LORA.h"
   // Sensor to display RF received value
   Log.trace(F("gatewayLORADiscovery" CR));
   char* gatewayLORA[8] = {"sensor", "gatewayLORA", "", "", jsonMsg, "", "", ""};
@@ -1219,6 +1334,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZgatewaySRFB
+#    include "config_SRFB.h"
   // Sensor to display RF received value
   Log.trace(F("gatewaySRFBDiscovery" CR));
   char* gatewaySRFB[8] = {"sensor", "gatewaySRFB", "", "", jsonVal, "", "", ""};
@@ -1236,6 +1352,8 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZgatewayPilight
+#    include "config_RF.h"
+
   // Sensor to display RF received value
   Log.trace(F("gatewayPilightDiscovery" CR));
   char* gatewayPilight[8] = {"sensor", "gatewayPilight", "", "", jsonMsg, "", "", ""};
@@ -1258,6 +1376,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef ZgatewayIR
+#    include "config_IR.h"
   // Sensor to display IR received value
   Log.trace(F("gatewayIRDiscovery" CR));
   char* gatewayIR[8] = {"sensor", "gatewayIR", "", "", jsonVal, "", "", ""};
@@ -1275,6 +1394,7 @@ void pubMqttDiscovery() {
 #  endif
 
 #  ifdef Zgateway2G
+#    include "config_2G.h"
   // Sensor to display 2G received value
   Log.trace(F("gateway2GDiscovery" CR));
   char* gateway2G[8] = {"sensor", "gateway2G", "", "", jsonMsg, "", "", ""};

main/sensorADC.cpp

@@ -29,6 +29,8 @@
 #include "User_config.h"
 
 #ifdef ZsensorADC
+#  include "TheengsCommon.h"
+#  include "config_ADC.h"
 
 #  if defined(ESP8266)
 ADC_MODE(ADC_TOUT);

main/sensorAHTx0.cpp

@@ -41,6 +41,7 @@
 #  include <stdint.h>
 
 #  include "Adafruit_AHTX0.h"
+#  include "TheengsCommon.h"
 #  include "Wire.h" // Library for communication with I2C / TWI devices
 #  include "config_AHTx0.h"
 

main/sensorBH1750.cpp

@@ -39,9 +39,15 @@
 #include "User_config.h"
 
 #ifdef ZsensorBH1750
+#  include "TheengsCommon.h"
 #  include "Wire.h" // Library for communication with I2C / TWI devices
+#  include "config_BH1750.h"
 #  include "math.h" // Library for trig and exponential functions
 
+//Time used to wait for an interval before resending measured values
+static unsigned long timebh1750 = 0;
+static int BH1750_i2c_addr = BH1750_I2C_ADDR;
+
 void setupZsensorBH1750() {
   Log.notice(F("Setup BH1750 on adress: %H" CR), BH1750_i2c_addr);
   Wire.begin();

main/sensorBME280.cpp

@@ -43,10 +43,14 @@
 #  include <stdint.h>
 
 #  include "SparkFunBME280.h"
+#  include "TheengsCommon.h"
 #  include "Wire.h" // Library for communication with I2C / TWI devices
+#  include "config_BME280.h"
 
-//Global sensor object
+//Time used to wait for an interval before resending measured values
-BME280 mySensor;
+static unsigned long timebme280 = 0;
+static int BME280_i2c_addr = BME280_I2C_ADDR; // Default I2C address for BME280 is 0x76, for BMP280 is 0x77
+static BME280 mySensor;
 
 void setupZsensorBME280() {
   // Allow custom pins on ESP Platforms

main/sensorC37_YL83_HMRD.cpp

@@ -24,6 +24,8 @@
 #include "User_config.h"
 
 #ifdef ZsensorC37_YL83_HMRD
+#  include "TheengsCommon.h"
+#  include "config_C37_YL83_HMRD.h"
 
 //Time used to wait for an interval before resending temp and hum
 unsigned long timeC37YL83HMRD = 0;

main/sensorDHT.cpp

@@ -33,6 +33,9 @@
 #  include <DHT.h>
 #  include <DHT_U.h>
 
+#  include "TheengsCommon.h"
+#  include "config_DHT.h"
+
 DHT dht(DHT_RECEIVER_GPIO, DHT_SENSOR_TYPE);
 
 //Time used to wait for an interval before resending temp and hum

main/sensorDS1820.cpp

@@ -29,6 +29,9 @@
 #  include <DallasTemperature.h>
 #  include <OneWire.h>
 
+#  include "TheengsCommon.h"
+#  include "config_DS1820.h"
+
 OneWire owbus(DS1820_OWBUS_GPIO);
 DallasTemperature ds1820(&owbus);
 DeviceAddress ds1820_address, ds1820_devices[OW_MAX_SENSORS];
@@ -38,6 +41,15 @@ static uint8_t ds1820_resolution[OW_MAX_SENSORS];
 static String ds1820_type[OW_MAX_SENSORS];
 static String ds1820_addr[OW_MAX_SENSORS];
 
+extern void createDiscovery(const char* sensor_type,
+                            const char* st_topic, const char* s_name, const char* unique_id,
+                            const char* availability_topic, const char* device_class, const char* value_template,
+                            const char* payload_on, const char* payload_off, const char* unit_of_meas,
+                            int off_delay,
+                            const char* payload_available, const char* payload_not_available, bool gateway_entity, const char* cmd_topic,
+                            const char* device_name, const char* device_manufacturer, const char* device_model, const char* device_id, bool retainCmd,
+                            const char* state_class, const char* state_off, const char* state_on, const char* enum_options, const char* command_template);
+
 void setupZsensorDS1820() {
   Log.trace(F("DS1820: configured pin: %d for 1-wire bus" CR), DS1820_OWBUS_GPIO);
   ds1820.begin();
@@ -100,6 +112,8 @@ void setupZsensorDS1820() {
 void pubOneWire_HADiscovery() {
   // If zmqttDiscovery is enabled, create a sensor topic for each DS18b20 sensor found on the bus, using addr as uniqueID
 #  ifdef ZmqttDiscovery
+#    include "config_mqttDiscovery.h"
+
   // If zmqtt discovery is enabled, create a sensor topic for each DS18b20 sensor found on the bus, using addr as uniqueID
   if (SYSConfig.discovery) {
     for (int index = 0; index < ds1820_count; index++) {

main/sensorGPIOInput.cpp

@@ -29,6 +29,12 @@
 #include "User_config.h"
 
 #ifdef ZsensorGPIOInput
+#  include "TheengsCommon.h"
+#  include "config_GPIOInput.h"
+
+extern void ActuatorTrigger();
+extern void eraseConfig();
+
 #  if defined(TRIGGER_GPIO) && INPUT_GPIO == TRIGGER_GPIO
 unsigned long resetTime = 0;
 #  endif

main/sensorGPIOKeyCode.cpp

@@ -26,6 +26,8 @@
 #include "User_config.h"
 
 #ifdef ZsensorGPIOKeyCode
+#  include "TheengsCommon.h"
+#  include "config_GPIOKeyCode.h"
 
 int InputStateGPIOKeyCode = 0x0f; // Set to 3 so that it reads on startup
 int lastInputStateGPIOKeyCode = 0x0f;

main/sensorHCSR04.cpp

@@ -30,6 +30,8 @@
 #include "User_config.h"
 
 #ifdef ZsensorHCSR04
+#  include "TheengsCommon.h"
+#  include "config_HCSR04.h"
 
 unsigned long timeHCSR04 = 0;
 

main/sensorHCSR501.cpp

@@ -29,6 +29,8 @@
 #include "User_config.h"
 
 #ifdef ZsensorHCSR501
+#  include "TheengsCommon.h"
+#  include "config_HCSR501.h"
 
 void setupHCSR501() {
   Log.notice(F("HCSR501 pin: %d" CR), HCSR501_GPIO);

main/sensorHTU21.cpp

@@ -41,6 +41,7 @@
 #  include <stdint.h>
 
 #  include "SparkFunHTU21D.h"
+#  include "TheengsCommon.h"
 #  include "Wire.h" // Library for communication with I2C / TWI devices
 #  include "config_HTU21.h"
 

main/sensorINA226.cpp

@@ -37,6 +37,12 @@
 #ifdef ZsensorINA226
 #  include <Wire.h>
 
+#  include "TheengsCommon.h"
+#  include "config_INA226.h"
+
+static void writeRegister(byte reg, word value);
+static word readRegister(byte reg);
+
 float rShunt = 0.1; // Shunt Widerstand festlegen, hier 0.1 Ohm
 const int INA226_ADDR = 0x40; // A0 und A1 auf GND > Adresse 40 Hex auf Seite 18 im Datenblatt
 
@@ -77,7 +83,7 @@ void MeasureINA226() {
   }
 }
 
-static void writeRegister(byte reg, word value) {
+void writeRegister(byte reg, word value) {
   Wire.beginTransmission(INA226_ADDR);
   Wire.write(reg);
   Wire.write((value >> 8) & 0xFF);
@@ -85,7 +91,7 @@ static void writeRegister(byte reg, word value) {
   Wire.endTransmission();
 }
 
-static word readRegister(byte reg) {
+word readRegister(byte reg) {
   word res = 0x0000;
   Wire.beginTransmission(INA226_ADDR);
   Wire.write(reg);

main/sensorLM75.cpp

@@ -41,6 +41,7 @@
 #  include <stdint.h>
 
 #  include "Temperature_LM75_Derived.h"
+#  include "TheengsCommon.h"
 #  include "Wire.h" // Library for communication with I2C / TWI devices
 #  include "config_LM75.h"
 

main/sensorMQ2.cpp

@@ -36,10 +36,14 @@
 #include "User_config.h"
 
 #ifdef ZsensorMQ2
-
+#  include "TheengsCommon.h"
 #  include "Wire.h"
+#  include "config_MQ2.h"
 #  include "math.h"
 
+//Time used to wait for an interval before resending measured values
+unsigned long timemq2 = 0;
+
 void setupZsensorMQ2() {
   Log.notice(F("Setup MQ2 detection on pin: %d" CR), MQ2SENSORDETECTPIN);
   pinMode(MQ2SENSORDETECTPIN, INPUT); // declare GPIOInput pin as input_pullup to prevent floating. Pin will be high when not connected to ground

main/sensorRN8209.cpp

@@ -24,14 +24,21 @@
     You should have received a copy of the GNU General Public License
     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#ifdef ZsensorRN8209
+#include "User_config.h"
 
-#  include "ArduinoJson.h"
+#ifdef ZsensorRN8209
-#  include "driver/uart.h"
+#  include <TheengsUtils.h>
-#  include "rn8209_flash.h"
+#  include <driver/uart.h>
-#  include "rn8209c_user.h"
+#  include <rn8209_flash.h>
+#  include <rn8209c_user.h>
+
+#  include "TheengsCommon.h"
+#  include "config_RN8209.h"
 
 extern "C" bool init_8209c_interface();
+extern void overLimitCurrent(float RN8209current);
+
+extern bool ProcessLock;
 
 float voltage = 0;
 float current = 0;
@@ -112,7 +119,7 @@ void setupRN8209() {
   init_8209c_interface();
   xTaskCreate(rn8209_loop, "rn8209_loop", RN8209_TASK_STACK_SIZE_OVERRIDE, NULL, 10, &rn8209TaskHandle);
   //esp_task_wdt_add(rn8209TaskHandle);
-  Log.trace(F("ZsensorRN8209 setup done " CR));
+  Log.trace(F("sensorRN8209 setup done " CR));
 }
 
 #endif // ZsensorRN8209

main/sensorSHTC3.cpp

@@ -3,6 +3,8 @@
 #ifdef ZsensorSHTC3
 #  include <SparkFun_SHTC3.h>
 
+#  include "TheengsCommon.h"
+
 SHTC3 mySHTC3;
 
 //Time used to wait for an interval before resending temp and hum

main/sensorTEMT6000.cpp

@@ -38,10 +38,14 @@
 #include "User_config.h"
 
 #ifdef ZsensorTEMT6000
-
+#  include "TheengsCommon.h"
 #  include "Wire.h"
+#  include "config_TEMT6000.h"
 #  include "math.h"
 
+//Time used to wait for an interval before resending measured values
+static unsigned long timetemt6000 = 0;
+
 void setupZsensorTEMT6000() {
   Log.notice(F("Setup TEMT6000 on pin: %i" CR), TEMT6000LIGHTSENSORPIN);
   pinMode(TEMT6000LIGHTSENSORPIN, INPUT);

main/sensorTSL2561.cpp

@@ -43,9 +43,15 @@
 #  include <Adafruit_Sensor.h>
 #  include <Adafruit_TSL2561_U.h>
 
+#  include "TheengsCommon.h"
 #  include "Wire.h"
+#  include "config_TSL2561.h"
 #  include "math.h"
 
+//Time used to wait for an interval before resending measured values
+static unsigned long timetsl2561 = 0;
+//int TSL2561_i2c_addr = 0x37; // Light Sensor I2C Address (Set in Adafruit library)
+
 Adafruit_TSL2561_Unified tsl = Adafruit_TSL2561_Unified(TSL2561_ADDR_FLOAT, 12345);
 
 void displaySensorDetails(void) {

main/sensorTouch.cpp

@@ -1,155 +1,153 @@
-/*  
+/*  
-  Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
+  Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
-
+
-   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker 
+   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker 
-   Send and receiving command by MQTT
+   Send and receiving command by MQTT
- 
+ 
-    For esp32, touch sensor reading add-on.
+    For esp32, touch sensor reading add-on.
-  
+  
-    Copyright: (c) Florian Xhumari
+    Copyright: (c) Florian Xhumari
-    
+    
-    This file is part of OpenMQTTGateway.
+    This file is part of OpenMQTTGateway.
-    
+    
-    OpenMQTTGateway is free software: you can redistribute it and/or modify
+    OpenMQTTGateway is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
+    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
+    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
+    (at your option) any later version.
-
+
-    OpenMQTTGateway is distributed in the hope that it will be useful,
+    OpenMQTTGateway is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
+    GNU General Public License for more details.
-
+
-    You should have received a copy of the GNU General Public License
+    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+*/
-#include <HardwareSerial.h>
+
-
+#include "User_config.h"
-#include "ArduinoJson.h"
+
-#include "User_config.h"
+#ifdef ZsensorTouch
-#include "config_Touch.h"
+#  include "TheengsCommon.h"
-
+#  include "config_Touch.h"
-#ifdef ZsensorTouch
+#  ifndef ESP32
-
+#    error Only supported on esp32
-#  ifndef ESP32
+#  endif
-#    error Only supported on esp32
+
-#  endif
+//Time used to wait for an interval before resending touch sensor value
-
+static unsigned long touchTimeRead = 0;
-//Time used to wait for an interval before resending touch sensor value
+
-static unsigned long touchTimeRead = 0;
+// for each touch button
-
+struct TouchStatus {
-// for each touch button
+  uint8_t pin;
-struct TouchStatus {
+  uint16_t timePublished = 0;
-  uint8_t pin;
+  uint16_t timeStatusChanged = 0;
-  uint16_t timePublished = 0;
+  uint16_t avg = 10 * 256; // starting value; multiplied by 256
-  uint16_t timeStatusChanged = 0;
+  bool isOn = false;
-  uint16_t avg = 10 * 256; // starting value; multiplied by 256
+  bool wasOn = false;
-  bool isOn = false;
+  int onCount = 0; // number of consecutive readings that were considered "ON"
-  bool wasOn = false;
+  unsigned long onTime; // time the button was turned on
-  int onCount = 0; // number of consecutive readings that were considered "ON"
+};
-  unsigned long onTime; // time the button was turned on
+
-};
+static TouchStatus status[TOUCH_SENSORS];
-
+
-static TouchStatus status[TOUCH_SENSORS];
+void setupTouch() {
-
+#  if TOUCH_SENSORS > 0
-void setupTouch() {
+  status[0].pin = TOUCH_GPIO_0;
-#  if TOUCH_SENSORS > 0
+#  endif
-  status[0].pin = TOUCH_GPIO_0;
+#  if TOUCH_SENSORS > 1
-#  endif
+  status[1].pin = TOUCH_GPIO_1;
-#  if TOUCH_SENSORS > 1
+#  endif
-  status[1].pin = TOUCH_GPIO_1;
+#  if TOUCH_SENSORS > 2
-#  endif
+  status[2].pin = TOUCH_GPIO_2;
-#  if TOUCH_SENSORS > 2
+#  endif
-  status[2].pin = TOUCH_GPIO_2;
+#  if TOUCH_SENSORS > 3
-#  endif
+  status[3].pin = TOUCH_GPIO_3;
-#  if TOUCH_SENSORS > 3
+#  endif
-  status[3].pin = TOUCH_GPIO_3;
+#  if TOUCH_SENSORS > 4
-#  endif
+  status[4].pin = TOUCH_GPIO_4;
-#  if TOUCH_SENSORS > 4
+#  endif
-  status[4].pin = TOUCH_GPIO_4;
+#  if TOUCH_SENSORS > 5
-#  endif
+  status[5].pin = TOUCH_GPIO_5;
-#  if TOUCH_SENSORS > 5
+#  endif
-  status[5].pin = TOUCH_GPIO_5;
+#  if TOUCH_SENSORS > 6
-#  endif
+  status[6].pin = TOUCH_GPIO_6;
-#  if TOUCH_SENSORS > 6
+#  endif
-  status[6].pin = TOUCH_GPIO_6;
+#  if TOUCH_SENSORS > 7
-#  endif
+  status[7].pin = TOUCH_GPIO_7;
-#  if TOUCH_SENSORS > 7
+#  endif
-  status[7].pin = TOUCH_GPIO_7;
+#  if TOUCH_SENSORS > 8
-#  endif
+  status[8].pin = TOUCH_GPIO_8;
-#  if TOUCH_SENSORS > 8
+#  endif
-  status[8].pin = TOUCH_GPIO_8;
+#  if TOUCH_SENSORS > 9
-#  endif
+  status[9].pin = TOUCH_GPIO_9;
-#  if TOUCH_SENSORS > 9
+#  endif
-  status[9].pin = TOUCH_GPIO_9;
+  for (int i = 0; i < TOUCH_SENSORS; i++) {
-#  endif
+    Log.notice(F("TOUCH_GPIO_%d: %d" CR), i, status[i].pin);
-  for (int i = 0; i < TOUCH_SENSORS; i++) {
+  }
-    Log.notice(F("TOUCH_GPIO_%d: %d" CR), i, status[i].pin);
+  touchTimeRead = millis() - TOUCH_TIME_BETWEEN_READINGS; // so we get a first reading at the beginning
-  }
+}
-  touchTimeRead = millis() - TOUCH_TIME_BETWEEN_READINGS; // so we get a first reading at the beginning
+
-}
+void MeasureTouch() {
-
+  unsigned long now = millis();
-void MeasureTouch() {
+  if (now - touchTimeRead < TOUCH_TIME_BETWEEN_READINGS) {
-  unsigned long now = millis();
+    return;
-  if (now - touchTimeRead < TOUCH_TIME_BETWEEN_READINGS) {
+  }
-    return;
+  touchTimeRead = now;
-  }
+  for (int i = 0; i < TOUCH_SENSORS; i++) {
-  touchTimeRead = now;
+    TouchStatus* button = &status[i];
-  for (int i = 0; i < TOUCH_SENSORS; i++) {
+
-    TouchStatus* button = &status[i];
+    uint16_t val = touchRead(button->pin);
-
+    if (val == 0) {
-    uint16_t val = touchRead(button->pin);
+      // just ignore a 0 reading
-    if (val == 0) {
+      continue;
-      // just ignore a 0 reading
+    }
-      continue;
+
-    }
+    // we'll work in 1/265th of a unit value returned by touchRead(), in order
-
+    // to have a better precision when performing averages and divisions, while
-    // we'll work in 1/265th of a unit value returned by touchRead(), in order
+    // not using floating point calculations.
-    // to have a better precision when performing averages and divisions, while
+    uint16_t curValue = val * 256;
-    // not using floating point calculations.
+    bool isOn = (curValue < button->avg * (TOUCH_THRESHOLD * 256 / 100) / 256); // just so that we divide by 256 and not by 100
-    uint16_t curValue = val * 256;
+    if (!isOn) {
-    bool isOn = (curValue < button->avg * (TOUCH_THRESHOLD * 256 / 100) / 256); // just so that we divide by 256 and not by 100
+      button->avg = (button->avg * 127 + val * 256 * 1) / 128; // exponential averaging, factor = 1/128
-    if (!isOn) {
+    }
-      button->avg = (button->avg * 127 + val * 256 * 1) / 128; // exponential averaging, factor = 1/128
+    int lastOnCount = button->onCount;
-    }
+    if (isOn) {
-    int lastOnCount = button->onCount;
+      ++button->onCount;
-    if (isOn) {
+    } else {
-      ++button->onCount;
+      button->onCount = 0;
-    } else {
+    }
-      button->onCount = 0;
+
-    }
+    bool isStatusChanged = false;
-
+    if (((button->wasOn && !isOn) || (!button->wasOn && isOn && button->onCount >= TOUCH_MIN_DURATION / TOUCH_TIME_BETWEEN_READINGS)) && now - button->timeStatusChanged > TOUCH_DEBOUNCE_TIME) { // debounce
-    bool isStatusChanged = false;
+      isStatusChanged = true;
-    if (((button->wasOn && !isOn) || (!button->wasOn && isOn && button->onCount >= TOUCH_MIN_DURATION / TOUCH_TIME_BETWEEN_READINGS)) && now - button->timeStatusChanged > TOUCH_DEBOUNCE_TIME) { // debounce
+      button->wasOn = isOn;
-      isStatusChanged = true;
+      button->timeStatusChanged = now;
-      button->wasOn = isOn;
+      if (isOn) {
-      button->timeStatusChanged = now;
+        button->onTime = now;
-      if (isOn) {
+      }
-        button->onTime = now;
+    }
-      }
+    // keep timeStatusChanged from getting too old, so not to go
-    }
+    // beyond timestamp wrapping
-    // keep timeStatusChanged from getting too old, so not to go
+    if (now - button->timeStatusChanged > 100000) {
-    // beyond timestamp wrapping
+      button->timeStatusChanged = now - 100000;
-    if (now - button->timeStatusChanged > 100000) {
+    }
-      button->timeStatusChanged = now - 100000;
+    if (isStatusChanged) {
-    }
+      const int JSON_MSG_CALC_BUFFER = JSON_OBJECT_SIZE(4);
-    if (isStatusChanged) {
+      StaticJsonDocument<JSON_MSG_CALC_BUFFER> jsonDoc;
-      const int JSON_MSG_CALC_BUFFER = JSON_OBJECT_SIZE(4);
+      JsonObject touchData = jsonDoc.to<JsonObject>();
-      StaticJsonDocument<JSON_MSG_CALC_BUFFER> jsonDoc;
+      touchData["id"] = i;
-      JsonObject touchData = jsonDoc.to<JsonObject>();
+      touchData["on"] = (isOn ? 1 : 0);
-      touchData["id"] = i;
+      touchData["value"] = (int)(curValue / 256);
-      touchData["on"] = (isOn ? 1 : 0);
+      if (!isOn) { // when turning off, send the duration the button was on
-      touchData["value"] = (int)(curValue / 256);
+        touchData["onDuration"] = now - button->onTime + TOUCH_MIN_DURATION;
-      if (!isOn) { // when turning off, send the duration the button was on
+      }
-        touchData["onDuration"] = now - button->onTime + TOUCH_MIN_DURATION;
+      touchData["origin"] = subjectTouchtoMQTT;
-      }
+      enqueueJsonObject(touchData);
-      touchData["origin"] = subjectTouchtoMQTT;
+      button->timePublished = now;
-      enqueueJsonObject(touchData);
+    }
-      button->timePublished = now;
+    // adjust measure time so that min(avg of all buttons) is around 60 (between 40 and 80)
-    }
+    // TODO
-    // adjust measure time so that min(avg of all buttons) is around 60 (between 40 and 80)
+
-    // TODO
+  } // loop
-
+}
-  } // loop
+#endif
-}
-#endif

main/webUI.cpp

@@ -1,13 +1,13 @@
-/*  
+/*
   Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
 
-   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker 
+   Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
    Send and receiving command by MQTT
 
     Copyright: (c)Florian ROBERT
-  
+
     This file is part of OpenMQTTGateway.
-    
+
     OpenMQTTGateway is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation, either version 3 of the License, or
@@ -23,11 +23,10 @@
 */
 #include "User_config.h"
 #if defined(ZwebUI) && defined(ESP32)
-#  include <ArduinoJson.h>
 #  include <SPIFFS.h>
 #  include <WebServer.h> // Docs for this are here - https://github.com/espressif/arduino-esp32/tree/master/libraries/WebServer
+#  include <WiFi.h>
 
-#  include "ArduinoLog.h"
 #  include "config_WebContent.h"
 #  include "config_WebUI.h"
 
@@ -39,15 +38,34 @@
 #    include "config_SSD1306.h"
 #  endif
 
+extern String stateRFMeasures();
+
 uint32_t requestToken = 0;
 
 QueueHandle_t webUIQueue;
 
 WebServer server(80);
 
+webUIQueueMessage* currentWebUIMessage;
+
+extern JsonArray modules;
+extern char discovery_prefix[];
+extern String latestVersion;
+
+bool WebUIConfig_save();
+void sendRestartPage();
+bool WebUIConfig_load();
+void WebUIConfig_init();
+void addLog(const uint8_t* buffer, size_t size);
+
 /*------------------- External functions ----------------------*/
 extern void eraseConfig();
 extern unsigned long uptime();
+extern void ESPRestart(byte reason);
+extern void XtoSYS(const char* topicOri, JsonObject& SYSdata);
+extern String stateMeasures();
+extern void MQTTHttpsFWUpdate(const char* topicOri, JsonObject& HttpsFwUpdateData);
+extern void receivingDATA(const char* topicOri, const char* datacallback);
 
 /*------------------- Web Console Globals ----------------------*/
 
@@ -284,30 +302,6 @@ void AddLogData(uint32_t loglevel, const char* log_data, const char* log_data_pa
   }
 }
 
-bool NeedLogRefresh(uint32_t req_loglevel, uint32_t index) {
-  if (!log_buffer) {
-    return false;
-  } // Leave now if there is no buffer available
-
-#  ifdef ESP32
-  // this takes the mutex, and will be release when the class is destroyed -
-  // i.e. when the functon leaves  You CAN call mutex.give() to leave early.
-  TasAutoMutex mutex((SemaphoreHandle_t*)&log_buffer_mutex);
-#  endif // ESP32
-
-  // Skip initial buffer fill
-  if (strlen(log_buffer) < LOG_BUFFER_SIZE / 2) {
-    return false;
-  }
-
-  char* line;
-  size_t len;
-  if (!GetLog(req_loglevel, &index, &line, &len)) {
-    return false;
-  }
-  return ((line - log_buffer) < LOG_BUFFER_SIZE / 4);
-}
-
 bool GetLog(uint32_t req_loglevel, uint32_t* index_p, char** entry_pp, size_t* len_p) {
   if (!log_buffer) {
     return false;
@@ -365,6 +359,30 @@ bool GetLog(uint32_t req_loglevel, uint32_t* index_p, char** entry_pp, size_t* l
   return false;
 }
 
+bool NeedLogRefresh(uint32_t req_loglevel, uint32_t index) {
+  if (!log_buffer) {
+    return false;
+  } // Leave now if there is no buffer available
+
+#  ifdef ESP32
+  // this takes the mutex, and will be release when the class is destroyed -
+  // i.e. when the functon leaves  You CAN call mutex.give() to leave early.
+  TasAutoMutex mutex((SemaphoreHandle_t*)&log_buffer_mutex);
+#  endif // ESP32
+
+  // Skip initial buffer fill
+  if (strlen(log_buffer) < LOG_BUFFER_SIZE / 2) {
+    return false;
+  }
+
+  char* line;
+  size_t len;
+  if (!GetLog(req_loglevel, &index, &line, &len)) {
+    return false;
+  }
+  return ((line - log_buffer) < LOG_BUFFER_SIZE / 4);
+}
+
 /*------------------- Local functions ----------------------*/
 
 #  ifdef WEBUI_DEVELOPMENT
@@ -394,7 +412,7 @@ bool exists(String path) {
 
 /**
  * @brief / - Page
- * 
+ *
  */
 void handleRoot() {
   WEBUI_TRACE_LOG(F("handleRoot: uri: %s, args: %d, method: %d" CR), server.uri(), server.args(), server.method());
@@ -454,7 +472,7 @@ void handleRoot() {
 
 /**
  * @brief /CN - Configuration Page
- * 
+ *
  */
 void handleCN() {
   WEBUI_SECURE
@@ -688,7 +706,7 @@ void handleWI() {
  * T: handleMQ Arg: 0, mh=192.168.1.11
  * T: handleMQ Arg: 1, ml=1883
  * T: handleMQ Arg: 2, mu=1234
- * T: handleMQ Arg: 3, mp= 
+ * T: handleMQ Arg: 3, mp=
  * T: handleMQ Arg: 4, sc=on
  * T: handleMQ Arg: 5, h=
  * T: handleMQ Arg: 6, mt=home/
@@ -937,6 +955,11 @@ void handleLO() {
 }
 
 #  ifdef ZgatewayLORA
+#    include "config_LORA.h"
+extern void LORAConfig_fromJson(JsonObject& LORAdata);
+extern String stateLORAMeasures();
+extern LORAConfig_s LORAConfig;
+
 /**
  * @brief /LA - Configure LORA Page
  * T: handleLA: uri: /la, args: 11, method: 1
@@ -1108,6 +1131,17 @@ std::map<int, String> activeReceiverOptions = {
 #    endif
 };
 
+struct RFConfig_s {
+  float frequency;
+  int rssiThreshold;
+  int newOokThreshold;
+  int activeReceiver;
+};
+extern RFConfig_s RFConfig;
+
+bool validFrequency(float mhz);
+void RFConfig_fromJson(JsonObject& RFdata);
+
 bool isValidReceiver(int receiverId) {
   // Check if the receiverId exists in the activeReceiverOptions map
   return activeReceiverOptions.find(receiverId) != activeReceiverOptions.end();
@@ -1209,7 +1243,7 @@ void handleRF() {
 
 /**
  * @brief /RT - Reset configuration ( Erase and Restart ) from Configuration menu
- * 
+ *
  */
 void handleRT() {
   WEBUI_TRACE_LOG(F("handleRT: uri: %s, args: %d, method: %d" CR), server.uri(), server.args(), server.method());
@@ -1246,7 +1280,7 @@ void handleRT() {
 #  if defined(ZgatewayCloud)
 /**
  * @brief /CL - Cloud Configuration
- * 
+ *
  */
 void handleCL() {
   WEBUI_TRACE_LOG(F("handleCL: uri: %s, args: %d, method: %d" CR), server.uri(), server.args(), server.method());
@@ -1300,7 +1334,7 @@ void handleCL() {
 
 /**
  * @brief /TK - Receive Cloud Device Token
- * 
+ *
  */
 void handleTK() {
   WEBUI_TRACE_LOG(F("handleTK: uri: %s, args: %d, method: %d" CR), server.uri(), server.args(), server.method());
@@ -1343,7 +1377,7 @@ void handleTK() {
 
 /**
  * @brief /IN - Information Page
- * 
+ *
  */
 void handleIN() {
   WEBUI_TRACE_LOG(F("handleCN: uri: %s, args: %d, method: %d" CR), server.uri(), server.args(), server.method());
@@ -1360,6 +1394,7 @@ void handleIN() {
 
 // }1 json-oled }2 true } }1 Cloud }2 cloudEnabled}2true}1c
 #  if defined(ZgatewayBT)
+    String stateBTMeasures(bool start);
     informationDisplay += "1<BR>BT}2}1"; // }1 the bracket is not needed as the previous message ends with }
     informationDisplay += stateBTMeasures(false);
 #  endif
@@ -1421,7 +1456,7 @@ void handleIN() {
 
 /**
  * @brief /handleFavicon - Send Favicon
- * 
+ *
  */
 void handleFavicon() {
   WEBUI_TRACE_LOG(F("handleCN: uri: %s, args: %d, method: %d" CR), server.uri(), server.args(), server.method());
@@ -1432,7 +1467,7 @@ void handleFavicon() {
 #  if defined(ESP32) && defined(MQTT_HTTPS_FW_UPDATE)
 /**
  * @brief /UP - Firmware Upgrade Page
- * 
+ *
  */
 void handleUP() {
   WEBUI_TRACE_LOG(F("handleUP: uri: %s, args: %d, method: %d" CR), server.uri(), server.args(), server.method());
@@ -1518,7 +1553,7 @@ void sendRestartPage() {
 
 /**
  * @brief /CS - Serial Console and Command Line
- * 
+ *
  */
 void handleCS() {
   WEBUI_TRACE_LOG(F("handleCS: uri: %s, args: %d, method: %d" CR), server.uri(), server.args(), server.method());
@@ -1583,7 +1618,7 @@ void handleCS() {
 
 /**
  * @brief Page not found handler
- * 
+ *
  */
 void notFound() {
   WEBUI_SECURE
@@ -1608,7 +1643,7 @@ void notFound() {
 }
 
 void WebUISetup() {
-  WEBUI_TRACE_LOG(F("ZwebUI setup start" CR));
+  WEBUI_TRACE_LOG(F("webUI setup start" CR));
 
   WebUIConfig_load();
   webUIQueue = xQueueCreate(5, sizeof(webUIQueueMessage*));
@@ -1663,7 +1698,7 @@ void WebUISetup() {
   Log.trace(F("[WebUI] WebUI Secure %T" CR), webUISecure);
   Log.notice(F("OpenMQTTGateway URL: http://%s/" CR), WiFi.localIP().toString().c_str());
   displayPrint("URL: http://", (char*)WiFi.localIP().toString().c_str());
-  Log.notice(F("ZwebUI setup done" CR));
+  Log.notice(F("webUI setup done" CR));
 }
 
 unsigned long nextWebUIMessage = uptime() + DISPLAY_WEBUI_INTERVAL;
@@ -1674,7 +1709,9 @@ void WebUILoop() {
   if (uptime() >= nextWebUIMessage && uxQueueMessagesWaiting(webUIQueue)) {
     webUIQueueMessage* message = nullptr;
     xQueueReceive(webUIQueue, &message, portMAX_DELAY);
+#  if defined(ZdisplaySSD1306)
     newSSD1306Message = true;
+#  endif
 
     if (currentWebUIMessage) {
       free(currentWebUIMessage);

main/zzHTTPUpdate.cpp

@@ -1,408 +0,0 @@
-/**
- *
- * @file HTTPUpdate.cpp based om ESP8266HTTPUpdate.cpp
- * @date 16.10.2018
- * @author Markus Sattler
- *
- * Copyright (c) 2015 Markus Sattler. All rights reserved.
- * This file is part of the ESP32 Http Updater.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-#ifdef ESP32
-#  include "zzHTTPUpdate.h"
-
-#  include <StreamString.h>
-#  include <esp_ota_ops.h> // get running partition
-#  include <esp_partition.h>
-
-// To do extern "C" uint32_t _SPIFFS_start;
-// To do extern "C" uint32_t _SPIFFS_end;
-
-HTTPUpdate::HTTPUpdate(void)
-    : _httpClientTimeout(8000), _ledPin(-1) {
-  _followRedirects = HTTPC_DISABLE_FOLLOW_REDIRECTS;
-}
-
-HTTPUpdate::HTTPUpdate(int httpClientTimeout)
-    : _httpClientTimeout(httpClientTimeout), _ledPin(-1) {
-  _followRedirects = HTTPC_DISABLE_FOLLOW_REDIRECTS;
-}
-
-HTTPUpdate::~HTTPUpdate(void) {
-}
-
-HTTPUpdateResult HTTPUpdate::update(WiFiClient& client, const String& url, const String& currentVersion) {
-  HTTPClient http;
-  if (!http.begin(client, url)) {
-    return HTTP_UPDATE_FAILED;
-  }
-  return handleUpdate(http, currentVersion, false);
-}
-
-HTTPUpdateResult HTTPUpdate::updateSpiffs(HTTPClient& httpClient, const String& currentVersion) {
-  return handleUpdate(httpClient, currentVersion, true);
-}
-
-HTTPUpdateResult HTTPUpdate::updateSpiffs(WiFiClient& client, const String& url, const String& currentVersion) {
-  HTTPClient http;
-  if (!http.begin(client, url)) {
-    return HTTP_UPDATE_FAILED;
-  }
-  return handleUpdate(http, currentVersion, true);
-}
-
-HTTPUpdateResult HTTPUpdate::update(HTTPClient& httpClient,
-                                    const String& currentVersion) {
-  return handleUpdate(httpClient, currentVersion, false);
-}
-
-HTTPUpdateResult HTTPUpdate::update(WiFiClient& client, const String& host, uint16_t port, const String& uri,
-                                    const String& currentVersion) {
-  HTTPClient http;
-  if (!http.begin(client, host, port, uri)) {
-    return HTTP_UPDATE_FAILED;
-  }
-  return handleUpdate(http, currentVersion, false);
-}
-
-/**
- * return error code as int
- * @return int error code
- */
-int HTTPUpdate::getLastError(void) {
-  return _lastError;
-}
-
-/**
- * return error code as String
- * @return String error
- */
-String HTTPUpdate::getLastErrorString(void) {
-  if (_lastError == 0) {
-    return String(); // no error
-  }
-
-  // error from Update class
-  if (_lastError > 0) {
-    StreamString error;
-    Update.printError(error);
-    error.trim(); // remove line ending
-    return String("Update error: ") + error;
-  }
-
-  // error from http client
-  if (_lastError > -100) {
-    return String("HTTP error: ") + HTTPClient::errorToString(_lastError);
-  }
-
-  switch (_lastError) {
-    case HTTP_UE_TOO_LESS_SPACE:
-      return "Not Enough space";
-    case HTTP_UE_SERVER_NOT_REPORT_SIZE:
-      return "Server Did Not Report Size";
-    case HTTP_UE_SERVER_FILE_NOT_FOUND:
-      return "File Not Found (404)";
-    case HTTP_UE_SERVER_FORBIDDEN:
-      return "Forbidden (403)";
-    case HTTP_UE_SERVER_WRONG_HTTP_CODE:
-      return "Wrong HTTP Code";
-    case HTTP_UE_SERVER_FAULTY_MD5:
-      return "Wrong MD5";
-    case HTTP_UE_BIN_VERIFY_HEADER_FAILED:
-      return "Verify Bin Header Failed";
-    case HTTP_UE_BIN_FOR_WRONG_FLASH:
-      return "New Binary Does Not Fit Flash Size";
-    case HTTP_UE_NO_PARTITION:
-      return "Partition Could Not be Found";
-  }
-
-  return String();
-}
-
-String getSketchSHA256() {
-  const size_t HASH_LEN = 32; // SHA-256 digest length
-
-  uint8_t sha_256[HASH_LEN] = {0};
-
-  // get sha256 digest for running partition
-  if (esp_partition_get_sha256(esp_ota_get_running_partition(), sha_256) == 0) {
-    char buffer[2 * HASH_LEN + 1];
-
-    for (size_t index = 0; index < HASH_LEN; index++) {
-      uint8_t nibble = (sha_256[index] & 0xf0) >> 4;
-      buffer[2 * index] = nibble < 10 ? char(nibble + '0') : char(nibble - 10 + 'A');
-
-      nibble = sha_256[index] & 0x0f;
-      buffer[2 * index + 1] = nibble < 10 ? char(nibble + '0') : char(nibble - 10 + 'A');
-    }
-
-    buffer[2 * HASH_LEN] = '\0';
-
-    return String(buffer);
-  } else {
-    return String();
-  }
-}
-
-/**
- *
- * @param http HTTPClient *
- * @param currentVersion const char *
- * @return HTTPUpdateResult
- */
-HTTPUpdateResult HTTPUpdate::handleUpdate(HTTPClient& http, const String& currentVersion, bool spiffs) {
-  HTTPUpdateResult ret = HTTP_UPDATE_FAILED;
-
-  // use HTTP/1.0 for update since the update handler not support any transfer Encoding
-  http.useHTTP10(true);
-  http.setTimeout(_httpClientTimeout);
-  http.setFollowRedirects(_followRedirects);
-  http.setUserAgent("ESP32-http-Update");
-  http.addHeader("Cache-Control", "no-cache");
-  http.addHeader("x-ESP32-STA-MAC", WiFi.macAddress());
-  http.addHeader("x-ESP32-AP-MAC", WiFi.softAPmacAddress());
-  http.addHeader("x-ESP32-free-space", String(ESP.getFreeSketchSpace()));
-  http.addHeader("x-ESP32-sketch-size", String(ESP.getSketchSize()));
-  String sketchMD5 = ESP.getSketchMD5();
-  if (sketchMD5.length() != 0) {
-    http.addHeader("x-ESP32-sketch-md5", sketchMD5);
-  }
-  // Add also a SHA256
-  String sketchSHA256 = getSketchSHA256();
-  if (sketchSHA256.length() != 0) {
-    http.addHeader("x-ESP32-sketch-sha256", sketchSHA256);
-  }
-  http.addHeader("x-ESP32-chip-size", String(ESP.getFlashChipSize()));
-  http.addHeader("x-ESP32-sdk-version", ESP.getSdkVersion());
-
-  if (spiffs) {
-    http.addHeader("x-ESP32-mode", "spiffs");
-  } else {
-    http.addHeader("x-ESP32-mode", "sketch");
-  }
-
-  if (currentVersion && currentVersion[0] != 0x00) {
-    http.addHeader("x-ESP32-version", currentVersion);
-  }
-
-  const char* headerkeys[] = {"x-MD5"};
-  size_t headerkeyssize = sizeof(headerkeys) / sizeof(char*);
-
-  // track these headers
-  http.collectHeaders(headerkeys, headerkeyssize);
-
-  int code = http.GET();
-  int len = http.getSize();
-
-  if (code <= 0) {
-    log_e("HTTP error: %s\n", http.errorToString(code).c_str());
-    _lastError = code;
-    http.end();
-    return HTTP_UPDATE_FAILED;
-  }
-
-  log_d("Header read fin.\n");
-  log_d("Server header:\n");
-  log_d(" - code: %d\n", code);
-  log_d(" - len: %d\n", len);
-
-  if (http.hasHeader("x-MD5")) {
-    log_d(" - MD5: %s\n", http.header("x-MD5").c_str());
-  }
-
-  log_d("ESP32 info:\n");
-  log_d(" - free Space: %d\n", ESP.getFreeSketchSpace());
-  log_d(" - current Sketch Size: %d\n", ESP.getSketchSize());
-
-  if (currentVersion && currentVersion[0] != 0x00) {
-    log_d(" - current version: %s\n", currentVersion.c_str());
-  }
-
-  switch (code) {
-    case HTTP_CODE_OK: ///< OK (Start Update)
-      if (len > 0) {
-        bool startUpdate = true;
-        if (spiffs) {
-          const esp_partition_t* _partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
-          if (!_partition) {
-            _lastError = HTTP_UE_NO_PARTITION;
-            return HTTP_UPDATE_FAILED;
-          }
-
-          if (len > _partition->size) {
-            log_e("spiffsSize to low (%d) needed: %d\n", _partition->size, len);
-            startUpdate = false;
-          }
-        } else {
-          int sketchFreeSpace = ESP.getFreeSketchSpace();
-          if (!sketchFreeSpace) {
-            _lastError = HTTP_UE_NO_PARTITION;
-            return HTTP_UPDATE_FAILED;
-          }
-
-          if (len > sketchFreeSpace) {
-            log_e("FreeSketchSpace to low (%d) needed: %d\n", sketchFreeSpace, len);
-            startUpdate = false;
-          }
-        }
-
-        if (!startUpdate) {
-          _lastError = HTTP_UE_TOO_LESS_SPACE;
-          ret = HTTP_UPDATE_FAILED;
-        } else {
-          WiFiClient* tcp = http.getStreamPtr();
-
-          // To do?                WiFiUDP::stopAll();
-          // To do?                WiFiClient::stopAllExcept(tcp);
-
-          delay(100);
-
-          int command;
-
-          if (spiffs) {
-            command = U_SPIFFS;
-            log_d("runUpdate spiffs...\n");
-          } else {
-            command = U_FLASH;
-            log_d("runUpdate flash...\n");
-          }
-
-          if (!spiffs) {
-            /* To do
-                    uint8_t buf[4];
-                    if(tcp->peekBytes(&buf[0], 4) != 4) {
-                        log_e("peekBytes magic header failed\n");
-                        _lastError = HTTP_UE_BIN_VERIFY_HEADER_FAILED;
-                        http.end();
-                        return HTTP_UPDATE_FAILED;
-                    }
-*/
-
-            // check for valid first magic byte
-            //                    if(buf[0] != 0xE9) {
-            if (tcp->peek() != 0xE9) {
-              log_e("Magic header does not start with 0xE9\n");
-              _lastError = HTTP_UE_BIN_VERIFY_HEADER_FAILED;
-              http.end();
-              return HTTP_UPDATE_FAILED;
-            }
-            /* To do
-                    uint32_t bin_flash_size = ESP.magicFlashChipSize((buf[3] & 0xf0) >> 4);
-
-                    // check if new bin fits to SPI flash
-                    if(bin_flash_size > ESP.getFlashChipRealSize()) {
-                        log_e("New binary does not fit SPI Flash size\n");
-                        _lastError = HTTP_UE_BIN_FOR_WRONG_FLASH;
-                        http.end();
-                        return HTTP_UPDATE_FAILED;
-                    }
-*/
-          }
-          if (runUpdate(*tcp, len, http.header("x-MD5"), command)) {
-            ret = HTTP_UPDATE_OK;
-            log_d("Update ok\n");
-            http.end();
-
-            if (_rebootOnUpdate && !spiffs) {
-              ESP.restart();
-            }
-
-          } else {
-            ret = HTTP_UPDATE_FAILED;
-            log_e("Update failed\n");
-          }
-        }
-      } else {
-        _lastError = HTTP_UE_SERVER_NOT_REPORT_SIZE;
-        ret = HTTP_UPDATE_FAILED;
-        log_e("Content-Length was 0 or wasn't set by Server?!\n");
-      }
-      break;
-    case HTTP_CODE_NOT_MODIFIED:
-      ///< Not Modified (No updates)
-      ret = HTTP_UPDATE_NO_UPDATES;
-      break;
-    case HTTP_CODE_NOT_FOUND:
-      _lastError = HTTP_UE_SERVER_FILE_NOT_FOUND;
-      ret = HTTP_UPDATE_FAILED;
-      break;
-    case HTTP_CODE_FORBIDDEN:
-      _lastError = HTTP_UE_SERVER_FORBIDDEN;
-      ret = HTTP_UPDATE_FAILED;
-      break;
-    default:
-      _lastError = HTTP_UE_SERVER_WRONG_HTTP_CODE;
-      ret = HTTP_UPDATE_FAILED;
-      log_e("HTTP Code is (%d)\n", code);
-      break;
-  }
-
-  http.end();
-  return ret;
-}
-
-/**
- * write Update to flash
- * @param in Stream&
- * @param size uint32_t
- * @param md5 String
- * @return true if Update ok
- */
-bool HTTPUpdate::runUpdate(Stream& in, uint32_t size, String md5, int command) {
-  StreamString error;
-
-  if (!Update.begin(size, command, _ledPin, _ledOn)) {
-    _lastError = Update.getError();
-    Update.printError(error);
-    error.trim(); // remove line ending
-    log_e("Update.begin failed! (%s)\n", error.c_str());
-    return false;
-  }
-
-  if (md5.length()) {
-    if (!Update.setMD5(md5.c_str())) {
-      _lastError = HTTP_UE_SERVER_FAULTY_MD5;
-      log_e("Update.setMD5 failed! (%s)\n", md5.c_str());
-      return false;
-    }
-  }
-
-  // To do: the SHA256 could be checked if the server sends it
-
-  if (Update.writeStream(in) != size) {
-    _lastError = Update.getError();
-    Update.printError(error);
-    error.trim(); // remove line ending
-    log_e("Update.writeStream failed! (%s)\n", error.c_str());
-    return false;
-  }
-
-  if (!Update.end()) {
-    _lastError = Update.getError();
-    Update.printError(error);
-    error.trim(); // remove line ending
-    log_e("Update.end failed! (%s)\n", error.c_str());
-    return false;
-  }
-
-  return true;
-}
-
-#  if !defined(NO_GLOBAL_INSTANCES) && !defined(NO_GLOBAL_HTTPUPDATE)
-HTTPUpdate httpUpdate;
-#  endif
-#endif

main/zzHTTPUpdate.h

@@ -1,113 +0,0 @@
-/**
- *
- * @file HTTPUpdate.h based on ESP8266HTTPUpdate.h
- * @date 16.10.2018
- * @author Markus Sattler
- *
- * Copyright (c) 2015 Markus Sattler. All rights reserved.
- * This file is part of the ESP32 Http Updater.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-#ifdef ESP32
-#  ifndef ___zzHTTP_UPDATE_H___
-#    define ___zzHTTP_UPDATE_H___
-
-#    include <Arduino.h>
-#    include <HTTPClient.h>
-#    include <Update.h>
-#    include <WiFi.h>
-#    include <WiFiClient.h>
-#    include <WiFiUdp.h>
-
-/// note we use HTTP client errors too so we start at 100
-#    define HTTP_UE_TOO_LESS_SPACE           (-100)
-#    define HTTP_UE_SERVER_NOT_REPORT_SIZE   (-101)
-#    define HTTP_UE_SERVER_FILE_NOT_FOUND    (-102)
-#    define HTTP_UE_SERVER_FORBIDDEN         (-103)
-#    define HTTP_UE_SERVER_WRONG_HTTP_CODE   (-104)
-#    define HTTP_UE_SERVER_FAULTY_MD5        (-105)
-#    define HTTP_UE_BIN_VERIFY_HEADER_FAILED (-106)
-#    define HTTP_UE_BIN_FOR_WRONG_FLASH      (-107)
-#    define HTTP_UE_NO_PARTITION             (-108)
-
-enum HTTPUpdateResult {
-  HTTP_UPDATE_FAILED,
-  HTTP_UPDATE_NO_UPDATES,
-  HTTP_UPDATE_OK
-};
-
-typedef HTTPUpdateResult t_httpUpdate_return; // backward compatibility
-
-class HTTPUpdate {
-public:
-  HTTPUpdate(void);
-  HTTPUpdate(int httpClientTimeout);
-  ~HTTPUpdate(void);
-
-  void rebootOnUpdate(bool reboot) {
-    _rebootOnUpdate = reboot;
-  }
-
-  /**
-      * set redirect follow mode. See `followRedirects_t` enum for avaliable modes.
-      * @param follow
-      */
-  void setFollowRedirects(followRedirects_t follow) {
-    _followRedirects = follow;
-  }
-
-  void setLedPin(int ledPin = -1, uint8_t ledOn = HIGH) {
-    _ledPin = ledPin;
-    _ledOn = ledOn;
-  }
-
-  t_httpUpdate_return update(WiFiClient& client, const String& url, const String& currentVersion = "");
-
-  t_httpUpdate_return update(WiFiClient& client, const String& host, uint16_t port, const String& uri = "/",
-                             const String& currentVersion = "");
-
-  t_httpUpdate_return updateSpiffs(WiFiClient& client, const String& url, const String& currentVersion = "");
-
-  t_httpUpdate_return update(HTTPClient& httpClient,
-                             const String& currentVersion = "");
-
-  t_httpUpdate_return updateSpiffs(HTTPClient& httpClient, const String& currentVersion = "");
-
-  int getLastError(void);
-  String getLastErrorString(void);
-
-protected:
-  t_httpUpdate_return handleUpdate(HTTPClient& http, const String& currentVersion, bool spiffs = false);
-  bool runUpdate(Stream& in, uint32_t size, String md5, int command = U_FLASH);
-
-  int _lastError;
-  bool _rebootOnUpdate = true;
-
-private:
-  int _httpClientTimeout;
-  followRedirects_t _followRedirects;
-
-  int _ledPin;
-  uint8_t _ledOn;
-};
-
-#    if !defined(NO_GLOBAL_INSTANCES) && !defined(NO_GLOBAL_HTTPUPDATE)
-extern HTTPUpdate httpUpdate;
-#    endif
-
-#  endif /* ___HTTP_UPDATE_H___ */
-#endif

partitions/no_coredump.csv

@@ -0,0 +1,6 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x1F0000,
+app1,     app,  ota_1,   0x200000,0x1F0000,
+spiffs,   data, spiffs,  0x3F0000,0x10000,

platformio.ini

@@ -114,15 +114,15 @@ extra_configs =
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
 [libraries]
-arduinojson = ArduinoJson@6.18.3
+arduinojson = ArduinoJson@6.18.5
 arduinolog = https://github.com/1technophile/Arduino-Log.git#f634509
 picomqtt = PicoMQTT@1.1.1
 rc-switch = https://github.com/1technophile/rc-switch.git#98537e9
 newremoteswitch = https://github.com/1technophile/NewRemoteSwitch.git#8eb980e
 ble = https://github.com/h2zero/NimBLE-Arduino.git#2.2.1
-irremoteesp = IRremoteESP8266@2.8.5
+irremoteesp = https://github.com/theengs/IRremoteESP8266#arduinov3
 lora = https://github.com/sandeepmistry/arduino-LoRa.git#f4a1d27
-esppilight = ESPiLight@0.17.0
+esppilight = https://github.com/theengs/ESPiLight#b9dd7a1
 rfWeatherStation = WeatherStationDataRx@0.3.1
 rfm69 = https://github.com/LowPowerLab/RFM69.git#2e915ea
 rfm69spi = https://github.com/lowpowerlab/spiflash.git#9c0c2b9
@@ -136,19 +136,19 @@ htu21 = SparkFun HTU21D Humidity and Temperature Sensor Breakout@1.1.3
 ahtx0 = Adafruit AHTX0
 ina226 = https://github.com/jarzebski/Arduino-INA226.git#968a684
 a6lib = https://github.com/h2zero/A6lib
-wifimanager32 = https://github.com/tzapu/WiFiManager.git#9f5981e
+wifimanager32 = https://github.com/h2zero/WiFiManager.git#1ac24f4
 wifimanager8266 = https://github.com/tzapu/WiFiManager.git#2.0.5-beta
 ethernet = Ethernet
 esp8266_mdns = esp8266_mdns
 wire = Wire
-fastled = fastled/FastLED@3.5.0
+fastled = fastled/FastLED@3.9.15
 adafruit_neopixel = adafruit/Adafruit NeoPixel@^1.11.0
-onewire = paulstoffregen/OneWire@2.3.7
+onewire = https://github.com/h2zero/OneWire#GPIO-fix
 dallastemperature = DallasTemperature
-m5stickc = M5StickC@0.2.0
+m5stickc = M5StickC@0.2.5
-m5stickcp = https://github.com/m5stack/M5StickC-Plus.git#0.0.2
+m5stickcp = https://github.com/m5stack/M5StickC-Plus.git#0.1.1
-m5stack = M5Stack@0.3.1
+m5stack = M5Stack@0.4.6
-m5tough = https://github.com/m5stack/M5Tough.git#b502416
+m5tough = https://github.com/m5stack/M5Tough.git#ccf49e1
 smartrc-cc1101-driver-lib = SmartRC-CC1101-Driver-Lib@2.5.7
 stl = https://github.com/mike-matera/ArduinoSTL.git#7411816
 shtc3 = https://github.com/sparkfun/SparkFun_SHTC3_Arduino_Library
@@ -176,7 +176,7 @@ monitor_speed = 115200
 
 [com]
 esp8266_platform = espressif8266@4.2.1
-esp32_platform = espressif32@6.1.0
+esp32_platform = https://github.com/pioarduino/platform-espressif32#53.03.11
 esp32_solo_platform = https://github.com/tasmota/platform-espressif32/releases/download/2023.02.00/platform-espressif32.zip
 atmelavr_platform = atmelavr@3.3.0
 
@@ -223,4 +223,4 @@ lib_deps =
   ${libraries.ethernet}
 build_flags =
   ${env.build_flags}
-  '-DsimpleReceiving=false'
+  '-DsimpleReceiving=false'

sdkconfig.defaults

@@ -125,6 +125,8 @@ CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
 CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
 # end of TLS Key Exchange Methods
 
+CONFIG_MBEDTLS_DHM_C=y
+
 #
 # Arduino Configuration
 #
@@ -151,7 +153,6 @@ CONFIG_ARDUINO_UDP_RUN_CORE0=y
 # CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY is not set
 CONFIG_ARDUINO_UDP_RUNNING_CORE=0
 CONFIG_ARDUINO_UDP_TASK_PRIORITY=3
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=n
 # CONFIG_ARDUINO_ISR_IRAM is not set
 # CONFIG_DISABLE_HAL_LOCKS is not set
 
@@ -177,35 +178,95 @@ CONFIG_ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS=y
 CONFIG_ARDUHAL_PARTITION_SCHEME="min_spiffs"
 # CONFIG_AUTOCONNECT_WIFI is not set
 CONFIG_ARDUINO_SELECTIVE_COMPILATION=y
-CONFIG_ARDUINO_SELECTIVE_ArduinoOTA=y
-CONFIG_ARDUINO_SELECTIVE_AsyncUDP=y
-# CONFIG_ARDUINO_SELECTIVE_AzureIoT is not set
-# CONFIG_ARDUINO_SELECTIVE_BLE is not set
-# CONFIG_ARDUINO_SELECTIVE_BluetoothSerial is not set
-CONFIG_ARDUINO_SELECTIVE_DNSServer=y
-CONFIG_ARDUINO_SELECTIVE_EEPROM=y
-CONFIG_ARDUINO_SELECTIVE_ESP32=y
-CONFIG_ARDUINO_SELECTIVE_ESPmDNS=y
-CONFIG_ARDUINO_SELECTIVE_FFat=y
-CONFIG_ARDUINO_SELECTIVE_FS=y
-CONFIG_ARDUINO_SELECTIVE_HTTPClient=y
-CONFIG_ARDUINO_SELECTIVE_LITTLEFS=y
-CONFIG_ARDUINO_SELECTIVE_NetBIOS=y
-CONFIG_ARDUINO_SELECTIVE_Preferences=y
-CONFIG_ARDUINO_SELECTIVE_SD=y
-CONFIG_ARDUINO_SELECTIVE_SD_MMC=y
-# CONFIG_ARDUINO_SELECTIVE_SimpleBLE is not set
 CONFIG_ARDUINO_SELECTIVE_SPI=y
-CONFIG_ARDUINO_SELECTIVE_SPIFFS=y
+CONFIG_ARDUINO_SELECTIVE_Wire=y
+CONFIG_ARDUINO_SELECTIVE_ESP_SR=y
+# CONFIG_ARDUINO_SELECTIVE_EEPROM is not set
+CONFIG_ARDUINO_SELECTIVE_Preferences=y
 CONFIG_ARDUINO_SELECTIVE_Ticker=y
 CONFIG_ARDUINO_SELECTIVE_Update=y
+# CONFIG_ARDUINO_SELECTIVE_Zigbee is not set
+CONFIG_ARDUINO_SELECTIVE_FS=y
+CONFIG_ARDUINO_SELECTIVE_SD=y
+CONFIG_ARDUINO_SELECTIVE_SD_MMC=y
+CONFIG_ARDUINO_SELECTIVE_SPIFFS=y
+CONFIG_ARDUINO_SELECTIVE_FFat=y
+CONFIG_ARDUINO_SELECTIVE_LittleFS=y
+CONFIG_ARDUINO_SELECTIVE_Network=y
+CONFIG_ARDUINO_SELECTIVE_Ethernet=y
+CONFIG_ARDUINO_SELECTIVE_PPP=y
+CONFIG_ARDUINO_SELECTIVE_ArduinoOTA=y
+CONFIG_ARDUINO_SELECTIVE_AsyncUDP=y
+CONFIG_ARDUINO_SELECTIVE_DNSServer=y
+CONFIG_ARDUINO_SELECTIVE_ESPmDNS=y
+CONFIG_ARDUINO_SELECTIVE_HTTPClient=y
+# CONFIG_ARDUINO_SELECTIVE_Matter is not set
+CONFIG_ARDUINO_SELECTIVE_NetBIOS=y
 CONFIG_ARDUINO_SELECTIVE_WebServer=y
 CONFIG_ARDUINO_SELECTIVE_WiFi=y
-CONFIG_ARDUINO_SELECTIVE_WiFiClientSecure=y
+CONFIG_ARDUINO_SELECTIVE_NetworkClientSecure=y
-CONFIG_ARDUINO_SELECTIVE_WiFiProv=y
+# CONFIG_ARDUINO_SELECTIVE_WiFiProv is not set
-CONFIG_ARDUINO_SELECTIVE_Wire=y
+# CONFIG_ARDUINO_SELECTIVE_BLE is not set
+# CONFIG_ARDUINO_SELECTIVE_BluetoothSerial is not set
+# CONFIG_ARDUINO_SELECTIVE_SimpleBLE is not set
+# CONFIG_ARDUINO_SELECTIVE_RainMaker is not set
+# CONFIG_ARDUINO_SELECTIVE_OpenThread is not set
+# CONFIG_ARDUINO_SELECTIVE_Insights is not set
+# end of Arduino Configuration
 # end of Arduino Configuration
 
 # CONFIG_ESP32_WIFI_IRAM_OPT is not set
 # CONFIG_ESP32_WIFI_RX_IRAM_OPT is not set
 
+CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
+CONFIG_BOOTLOADER_LOG_LEVEL=0
+CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
+CONFIG_LOG_DEFAULT_LEVEL=1
+
+CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
+CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=y
+CONFIG_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
+CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=4096
+CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2048
+CONFIG_ESP_TASK_WDT_PANIC=y
+CONFIG_ESP_TIMER_TASK_STACK_SIZE=4096
+CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=8
+CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM=8
+CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM=16
+CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1024
+CONFIG_HEAP_POISONING_LIGHT=y
+CONFIG_HTTPD_MAX_REQ_HDR_LEN=1024
+CONFIG_HTTPD_WS_SUPPORT=y
+# CONFIG_LOG_COLORS is not set
+
+# CONFIG_LWIP_DHCP_DOES_ARP_CHECK is not set
+CONFIG_LWIP_TCP_SYNMAXRTX=6
+CONFIG_LWIP_TCP_MSS=1436
+CONFIG_LWIP_TCP_RTO_TIME=3000
+CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=4096
+CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0=y
+CONFIG_LWIP_MAX_SOCKETS=16
+CONFIG_LWIP_IP_FORWARD=y
+CONFIG_LWIP_IPV4_NAPT=y
+CONFIG_LWIP_DHCP_RESTORE_LAST_IP=n
+CONFIG_LWIP_DHCP_OPTIONS_LEN=128
+CONFIG_LWIP_SNTP_MAX_SERVERS=3
+CONFIG_LWIP_SNTP_UPDATE_DELAY=10800000
+CONFIG_LWIP_DHCP_GET_NTP_SRV=y
+CONFIG_LWIP_IPV6_AUTOCONFIG=y
+CONFIG_LWIP_IPV6_DHCP6=y
+CONFIG_LWIP_IPV6_RDNSS_MAX_DNS_SERVERS=2
+CONFIG_LWIP_PPP_SUPPORT=y
+CONFIG_LWIP_PPP_NOTIFY_PHASE_SUPPORT=y
+CONFIG_LWIP_PPP_PAP_SUPPORT=y
+CONFIG_LWIP_PPP_ENABLE_IPV6=n
+CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT=y
+CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
+CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_DEFAULT=y
+CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT=y
+CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM=y
+CONFIG_MBEDTLS_DYNAMIC_BUFFER=y
+CONFIG_MBEDTLS_DYNAMIC_FREE_PEER_CERT=y
+CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA=y