[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

* Update arduino core to 3.1.1 * Fix Blufi build * Update arduinojson, fix build errors with idf * Fix narrowing * fix RF builds * WIP-Convert ino files to cpp * Fix pilight build * Fix Somfy actuator build. * Update esp32dev-rf partition * Fix Weatherstation build * Fix GFSunInverter build * Fix esp32dev-ir build * Fix ble-aws build * Fix eth builds * Fix m5Stack missing pins_arduino.h * Fix build errors for M5 stack/tough, others are upstream issues. * Fix RTL 433 build - remaining errors are from radolib * Fix nodemcu build * fix 2g builds * Fix serial build * Fix actuator on off builds * Fix SSD1306 build - remaining errors are from radiolib * Fix multiple definition of OTAserver_cert * Fix nodemcu rf2 build * Fix ADC builds * Fix sensor builds * Fix LORA builds * Fix multi-receiver builds - remaining errors are in radiolib * Fix fastled builds * Fix theegns board builds * Fix broker builds * Update fastled - old version failed all-test build * Fix RN8209 builds * Fix max temp actuator builds * Fix PWM builds * Fix C37 sensor builds * Fix HTU21 builds * Fix INA266 builds * Fix undefined variables in mqtt discovery * Fix webui build * Fix fastled invalid pin error * Fix wifi manual setup builds * Fix onewire/all-test build - bin too big error remaining * Fix theengs plug build * Fix rfbridge builds * Fix blufi builds * Fix undefined functions in serial * Fix preprocessor definition checks * Set IDF log level to erre * Add delay in loop to prevent watchdog timeout * Use xTaskCreateUniveral to support single core processors * Remove old HTTPUpdate files - upsteam fixed. * Cleanup and move common declarations to header file * Use custom partiton table to fix builds where bin is too large * Update M5StickC - fixs esp32-m5stick-c-ble build * Revert to Arduino core 2.x for builds with incompatible libs * Remove "Z" from file names and rename omg_common to TheengsCommon * Fix gateway name when using MAC with new Arduino core * Update IDF config to reduce loop task stack use * Update esp-nimble-cpp version, corrects BLE uppercase ID's * Update wifi manager to fix watchdog timeout error
2025-05-06 19:35:50 -05:00
1 parent 6e77efb11b
commit 585df9a420
@@ -0,0 +1,95 @@
+/*
+  Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
+
+   Act as a wifi or ethernet gateway between your GridFree SUN-2000G inverter and a MQTT broker.
+   Send inverter metrics by MQTT.
+
+  This gateway enables to:
+  - publish MQTT data, which are received by RS232 ModBus.
+
+    Library for read metrics from GWL Power, GridFree SUN-2000G inverter <https://shop.gwl.eu/GridFree-Inverters/GridFree-AC-Inverter-with-limiter-2kW-SUN-2000G-45-90V.html>.
+
+    This file is part of OpenMQTTGateway.
+
+    OpenMQTTGateway is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenMQTTGateway is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+     You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "User_config.h"
+
+#ifdef ZgatewayGFSunInverter
+
+#  include <GfSun2000.h>
+
+#  include "TheengsCommon.h"
+#  include "config_GFSunInverter.h"
+
+GfSun2000 GF = GfSun2000();
+
+void GFSunInverterDataHandler(GfSun2000Data data) {
+  StaticJsonDocument<JSON_MSG_BUFFER> jdataBuffer;
+  JsonObject jdata = jdataBuffer.to<JsonObject>();
+
+  jdata["device_id"] = (char*)data.deviceID;
+  Log.trace(F("Device ID     : %s\n" CR), data.deviceID);
+  jdata["ac_voltage"] = data.ACVoltage;
+  Log.trace(F("AC Voltage    : %.1f\tV\n" CR), data.ACVoltage);
+  jdata["dc_voltage"] = data.DCVoltage;
+  Log.trace(F("DC Voltage    : %.1f\tV\n" CR), data.DCVoltage);
+  jdata["power"] = data.averagePower;
+  Log.trace(F("Output Power  : %.1f\tW (5min avg)\n" CR), data.averagePower);
+  jdata["c_energy"] = data.customEnergyCounter;
+  Log.trace(F("Custom Energy : %.1f\tkW/h (can be reseted)\n" CR), data.customEnergyCounter);
+  jdata["t_energy"] = data.totalEnergyCounter;
+  Log.trace(F("Total Energy  : %.1f\tkW/h\n" CR), data.totalEnergyCounter);
+
+#  ifdef GFSUNINVERTER_DEVEL
+  StaticJsonDocument<JSON_MSG_BUFFER> jregisterBuffer;
+  JsonObject jregister = jregisterBuffer.to<JsonObject>();
+  char buffer[4];
+  std::map<int16_t, int16_t>::iterator itr;
+  for (itr = data.modbusRegistry.begin(); itr != data.modbusRegistry.end(); ++itr) {
+    Log.notice("%d: %d\n", itr->first, itr->second);
+    sprintf(buffer, "%d", itr->first);
+    jregister[buffer] = itr->second;
+  }
+  jdata["register"] = jregister;
+#  endif
+  jdata["origin"] = subjectRFtoMQTT;
+  enqueueJsonObject(jdata);
+}
+
+void GFSunInverterErrorHandler(int errorId, char* errorMessage) {
+  char buffer[50];
+  sprintf(buffer, "Error response: %02X - %s\n", errorId, errorMessage);
+  Log.error(buffer);
+  StaticJsonDocument<JSON_MSG_BUFFER> jdataBuffer;
+  JsonObject jdata = jdataBuffer.to<JsonObject>();
+  jdata["status"] = "error";
+  jdata["msg"] = errorMessage;
+  jdata["id"] = errorId;
+  jdata["origin"] = subjectRFtoMQTT;
+  enqueueJsonObject(jdata);
+}
+
+void setupGFSunInverter() {
+  GF.setup(Serial2);
+  GF.setDataHandler(GFSunInverterDataHandler);
+  GF.setErrorHandler(GFSunInverterErrorHandler);
+  Log.trace(F("gatewayGFSunInverter setup done " CR));
+}
+
+void ZgatewayGFSunInverterMQTT() {
+  GF.readData();
+  delay(GFSUNINVERTER_DELAY);
+}
+
+#endif