chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity

Pr/61 add I2C sensors BME280 and BH1750 (#64)

Browse Source 
* changed user config

* added lightsensor module

* changed Pin Adresses

* Added I2C Lightsensor

Added the I2C Lightsensor and Switchted most Pins

* removed some debug to serial

removed some debug stuff was send to serial console

* Merge with Master

* Too much things for arduino uno

per default remove sensors for it

* Adding I2C Module function

Opens the Door on OpenMQTTGateway for "i2c Bus Modules/Sensors"

* Fixing BH1750 detection

Fixing the detection for a missing BH1750 Module

* Add libraries and define sensors depending on wiring type #63
This commit is contained in:
Florian authored and GitHub committed 2017-06-14 23:42:11 +02:00
1 parent f02ab58e31
commit 56057690a5
9 files changed
+464 -24
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

User_config.h
+62 -20
View File
@@ -30,6 +30,12 @@
*/
/*----------------------------USER PARAMETERS-----------------------------*/
/*-------------DEFINE YOUR WIRING TYPE BELOW----------------*/
// Choose between "I2C_Wiring" OR "Classic_Wiring"
// Please Note: I2C Wiring and Classic Wiring uses two complete different Pins for all Modules, see PIN definitions at the end of this file
//#define I2C_Wiring // With Support for I2C Modules and the associated libraries BH1750 and BME280
#define Classic_Wiring // Without Support for I2C Modules, legacy wiring V0.3.1 and below
/*-------------DEFINE YOUR NETWORK PARAMETERS BELOW----------------*/
//MQTT Parameters definition
#define mqtt_server "192.168.1.17"
@@ -65,11 +71,23 @@ const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
/*-------------DEFINE THE MODULES YOU WANT BELOW----------------*/
//Addons and module management, comment the line if you don't use
//#define ZsensorDHT
#define ZgatewayRF
#define ZgatewayIR
#define ZgatewayBT
/*----------------------------OTHER PARAMETERS-----------------------------*/
#ifdef ESP8266 // for nodemcu, weemos and esp8266
//#define ZsensorDHT
#define ZgatewayRF
#define ZgatewayIR
#define ZgatewayBT
#ifdef I2C_Wiring // to use the sensor below the gateway should wired with I2CWiring, see PIN DEFINITIONS below
#define ZsensorBH1750
#define ZsensorBME280
#endif
#else // for arduino + W5100
#define ZgatewayRF
#define ZgatewayIR
#define ZgatewayBT
//#define ZsensorDHT
//#define ZsensorBH1750
//#define ZsensorBME280
#endif/*----------------------------OTHER PARAMETERS-----------------------------*/
/*-------------------CHANGING THEM IS NOT COMPULSORY-----------------------*/
//variables to avoid duplicates for RF
#define time_avoid_duplicate 3000 // if you want to avoid duplicate mqtt message received set this to > 0, the value is the time in milliseconds during which we don't publish duplicates
@@ -150,22 +168,46 @@ RF supported protocols
#define subjectBTtoMQTT "home/BTtoMQTT/"
/*-------------------PIN DEFINITIONS----------------------*/
#define IR_RECEIVER_PIN 2 // put 2 = D4 on nodemcu, 2 = D2 on arduino
#define RF_EMITTER_PIN 4 //put 4 = D2 on nodemcu, 4 = D4 on arduino
#ifdef ESP8266
#define IR_EMITTER_PIN 14 // 14 = D5 on nodemcu #define only usefull for ESP8266
//RF PIN definition
#define RF_RECEIVER_PIN 5 // 5 = D1 on nodemcu
#define BT_RX D7 //ESP8266 RX connect HM-10 TX
#define BT_TX D6 //ESP8266 TX connect HM-10 RX
#else
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
//RF PIN definition
#define RF_RECEIVER_PIN 1 // 1 = D3 on arduino
#define BT_RX 5 //arduino RX connect HM-10 TX
#define BT_TX 6 //arduino TX connect HM-10 RX
#ifdef I2C_Wiring // With Support for I2C Modules
#define DHT_RECEIVER_PIN 14 //on nodeMCU this is D5 GPIO14
#define IR_RECEIVER_PIN 2 // put 2 = D4 on nodemcu, 2 = D2 on arduino
#define RF_EMITTER_PIN 15 //put 15 = D8 on nodemcu
#ifdef ESP8266
#define IR_EMITTER_PIN 16 // 16 = D0 on nodemcu #define only usefull for ESP8266
//RF PIN definition
#define RF_RECEIVER_PIN 0 // 0 = D3 on nodemcu
#define BT_RX D7 //ESP8266 RX connect HM-10 TX
#define BT_TX D6 //ESP8266 TX connect HM-10 RX
#else
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
//RF PIN definition
#define RF_RECEIVER_PIN 1 // 1 = D3 on arduino
#define BT_RX 5 //arduino RX connect HM-10 TX
#define BT_TX 6 //arduino TX connect HM-10 RX
#endif
#endif
#ifdef Classic_Wiring // Without Support for I2C Modules
#define DHT_RECEIVER_PIN 0 //on nodeMCU this is D3 GPIO0
#define IR_RECEIVER_PIN 2 // put 2 = D4 on nodemcu, 2 = D2 on arduino
#define RF_EMITTER_PIN 4 //put 4 = D2 on nodemcu, 4 = D4 on arduino
#ifdef ESP8266
#define IR_EMITTER_PIN 14 // 14 = D5 on nodemcu #define only usefull for ESP8266
//RF PIN definition
#define RF_RECEIVER_PIN 5 // 5 = D1 on nodemcu
#define BT_RX D7 //ESP8266 RX connect HM-10 TX
#define BT_TX D6 //ESP8266 TX connect HM-10 RX
#else
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
//RF PIN definition
#define RF_RECEIVER_PIN 1 // 1 = D3 on arduino
#define BT_RX 5 //arduino RX connect HM-10 TX
#define BT_TX 6 //arduino TX connect HM-10 RX
#endif
#endif
//RF number of signal repetition
#define RF_EMITTER_REPEAT 20