When wifi is lost OMG is going to AP mode (#220)

* When wifi is lost OMG is going to AP mode

Avoid that except when OMG has never been connected to MQTT

OpenMQTTGateway.ino

@@ -120,6 +120,8 @@ unsigned long ReceivedSignal[array_size][2] ={{0,0},{0,0},{0,0},{0,0}};
 //adding this to bypass the problem of the arduino builder issue 50
 void callback(char*topic, byte* payload,unsigned int length);
 
+boolean connectedOnce = false; //indicate if we have been connected once to MQTT
+
 #ifdef ESP32
   #include <WiFi.h>
   #include <ArduinoOTA.h>
@@ -202,10 +204,10 @@ boolean reconnect() {
       // Wait 5 seconds before retrying
       delay(5000);
 
-      if (failure_number > 3){
+      if (failure_number > maxMQTTretry){
-        trc(F("failed connecting to mqtt at start reinit setup"));
+        trc(F("failed connecting to mqtt"));
         #if defined(ESP8266) && !defined(ESPWifiManualSetup)
-          setup_wifimanager(true);
+          if (!connectedOnce) setup_wifimanager(); // if we didn't connected once to mqtt we reset and start in AP mode again to have a chance to change the parameters
         #elif defined(ESP32) || defined(ESPWifiManualSetup)// ESP32 case we don't use Wifi manager yet
           setup_wifi();
         #endif
@@ -243,7 +245,7 @@ void setup()
       Serial.begin(SERIAL_BAUD, SERIAL_8N1, SERIAL_TX_ONLY);
     #endif
     #if defined(ESP8266) && !defined(ESPWifiManualSetup)
-      setup_wifimanager(false);
+      setup_wifimanager();
     #else // ESP32 case we don't use Wifi manager yet
       setup_wifi();
     #endif
@@ -397,10 +399,10 @@ void setup_wifi() {
 }
 
 #elif defined(ESP8266) && !defined(ESPWifiManualSetup)
-void setup_wifimanager(boolean reset_settings){
+void setup_wifimanager(){
     #ifdef cleanFS
     //clean FS, for testing
-    //SPIFFS.format();
+      SPIFFS.format();
     #endif
     //read configuration from FS json
     trc("mounting FS...");
@@ -462,10 +464,10 @@ void setup_wifimanager(boolean reset_settings){
     wifiManager.addParameter(&custom_mqtt_user);
     wifiManager.addParameter(&custom_mqtt_pass);
 
-    //reset settings - for testing
+    #ifdef cleanFS
-    //reset_settings = true;
+      //reset settings - for testing
-    if (reset_settings) wifiManager.resetSettings();
+      wifiManager.resetSettings();
-
+    #endif
     //set minimu quality of signal so it ignores AP's under that quality
     wifiManager.setMinimumSignalQuality(MinimumWifiSignalQuality);
   
@@ -579,7 +581,7 @@ void loop()
       digitalWrite(led_receive, HIGH);
     }
     digitalWrite(led_error, HIGH);
-    
+    connectedOnce = true;
     client.loop();
 
     #if defined(ESP8266) || defined(ESP32)
@@ -863,7 +865,6 @@ void trc(String msg){
   }
 }
 
-
 void trc(int msg){
   if (TRACE) {
   Serial.println(msg);
@@ -876,7 +877,6 @@ void trc(unsigned int msg){
   }
 }
 
-
 void trc(long msg){
   if (TRACE) {
   Serial.println(msg);

User_config.h

@@ -53,7 +53,8 @@ char mqtt_port[6] = "1883";
 //#define ESPWifiManualSetup true //uncomment you don't want to use wifimanager for your credential settings on ESP
 #define WifiManager_password "your_password"
 //#define MDNS_SD //uncomment if you  want to use mdns for discovering automatically your ip server, please note that MDNS with ESP32 can cause the BLE to not work
-//#define cleanFS //uncomment if you want to clean the ESP memory and reenter your credentials
+//#define cleanFS true //uncomment if you want to clean the ESP memory and reenter your credentials
+#define maxMQTTretry 4 //maximum MQTT connection attempts before going to wifi setup
 
 //set minimum quality of signal so it ignores AP's under that quality
 #define MinimumWifiSignalQuality 8

tests/Test_config.h

@@ -51,8 +51,9 @@ char mqtt_port[6] = "1883";
 
 //#define ESPWifiManualSetup true //uncomment you don't want to use wifimanager for your credential settings on ESP
 #define WifiManager_password "your_password"
-//#define MDNS_SD //comment if you don't want to use mdns for discovering automatically your ip server, please note that MDNS with ESP32 can cause the BLE to not work
+//#define MDNS_SD //uncomment if you  want to use mdns for discovering automatically your ip server, please note that MDNS with ESP32 can cause the BLE to not work
-//#define cleanFS //uncomment if you want to clean the ESP memory and reenter your credentials
+//#define cleanFS true //uncomment if you want to clean the ESP memory and reenter your credentials
+#define maxMQTTretry 4 //maximum MQTT connection attempts before going to wifi setup
 
 //set minimum quality of signal so it ignores AP's under that quality
 #define MinimumWifiSignalQuality 8