From 448a20a2cf38bc3eee29a4ec78d5a647290733c7 Mon Sep 17 00:00:00 2001
From: Florian <1technophile@users.noreply.github.com>
Date: Fri, 25 Jan 2019 00:04:50 +0100
Subject: [PATCH] add per default Irremote protocol for arduino mega

as the mega can handle the list without memory issue (contrary to the uno)
set default mega pinout
---
 config_IR.h | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/config_IR.h b/config_IR.h
index 7470a58..99dedac 100644
--- a/config_IR.h
+++ b/config_IR.h
@@ -79,6 +79,17 @@
   #define IR_Sharp
   #define IR_SAMSUNG
   #define IR_PANASONIC
+#elif __AVR_ATmega2560__
+  #define IR_COOLIX
+  #define IR_Whynter
+  #define IR_LG
+  #define IR_Sony
+  #define IR_DISH
+  #define IR_RC5
+  #define IR_Sharp
+  #define IR_SAMSUNG
+  #define IR_Raw
+  #define IR_PANASONIC
 #else //IR supported protocols on arduino uncomment if you want to send with this protocol, NEC protocol is available per default
   //#define IR_COOLIX
   //#define IR_Whynter
@@ -95,10 +106,13 @@
 /*-------------------PIN DEFINITIONS----------------------*/
 #ifdef ESP8266
   #define IR_RECEIVER_PIN 2
-  #define IR_EMITTER_PIN 16 // replace by 0 if you use IR LOLIN controller shield
+  #define IR_EMITTER_PIN 16 // replace by 0 (D3) if you use IR LOLIN controller shield
 #elif ESP32
   #define IR_RECEIVER_PIN 27
   #define IR_EMITTER_PIN 14
+#elif __AVR_ATmega2560__
+  #define IR_RECEIVER_PIN 2 // 2 = D2 on mega
+  #define IR_EMITTER_PIN 7
 #else
   #define IR_RECEIVER_PIN 0 // 0 = D2 on arduino
   #define IR_EMITTER_PIN 9