From 36659309b101233dceb71c492a6f48ffc6c39649 Mon Sep 17 00:00:00 2001 From: DigiH Date: Fri, 5 Jan 2024 19:13:34 +0100 Subject: [PATCH] [DOCS] info container fix (#1851) info container fix to ::: tip INFO --- docs/integrate/home_assistant.md | 2 +- docs/use/ble.md | 2 +- docs/use/gateway.md | 4 ++-- docs/use/rf.md | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/docs/integrate/home_assistant.md b/docs/integrate/home_assistant.md index a47a766..ce857a1 100644 --- a/docs/integrate/home_assistant.md +++ b/docs/integrate/home_assistant.md @@ -33,7 +33,7 @@ OMG will use the auto discovery functionality of home assistant to create gatewa ![Home Assistant Auto Discovery](../img/OpenMQTTGateway_Home_Assistant_MQTT_discovery.png) -::: info +::: tip INFO The Bluetooth and the RTL_433 gateway will create automatically devices and entities, the RF gateway will create DeviceTrigger. The OpenMQTTGateway will also be available as a device to monitor its parameters and control it. The sensors (DHT for example) and actuators (relays) are attached to the gateway. diff --git a/docs/use/ble.md b/docs/use/ble.md index e03a808..433eec6 100644 --- a/docs/use/ble.md +++ b/docs/use/ble.md @@ -78,7 +78,7 @@ Note that you can find apps to simulate beacons and do some tests like [Beacon s iOS version >=10 devices advertise without an extra app MAC address, nevertheless this address [changes randomly](https://github.com/1technophile/OpenMQTTGateway/issues/71) and cannot be used for presence detection. You must install an app to advertise a fixed MAC address. -::: info +::: tip INFO The `presenceawaytimer` is also used to reset the state of the PIR/motion sensors to `off` when using HA MQTT discovery convention. If the Sensor does not detect a motion, its state will be automatically set to `off` after the `presenceawaytimer`. ::: diff --git a/docs/use/gateway.md b/docs/use/gateway.md index 1204770..0840bb5 100644 --- a/docs/use/gateway.md +++ b/docs/use/gateway.md @@ -71,7 +71,7 @@ mosquitto_pub -t "home/OpenMQTTGateway/commands/MQTTtoSYS/config" -m "mqtt_secure": "false" }' ``` -::: info +::: tip INFO By default this function is not available on the pre built binary of RFBridge, in order to have less code size and enable to have OTA update working properly. So as to enable it remove from the rf bridge env: ``` build_flags = '-UMQTTsetMQTT' @@ -95,7 +95,7 @@ mosquitto_pub -t "home/OpenMQTTGateway/commands/MQTTtoSYS/config" -m "gateway_name": "name" }' ``` -::: info +::: tip INFO This will change the subscribed and published mqtt_topic/gateway_name that the gateway uses. No parameters are mandatory, the current topic or gateway name will be used if not supplied. ::: diff --git a/docs/use/rf.md b/docs/use/rf.md index 7820cd9..e52065d 100644 --- a/docs/use/rf.md +++ b/docs/use/rf.md @@ -21,7 +21,7 @@ OpenMQTTGateway leverages several libraries for RF communication: | Pilight | Open-source solution for device control and data retrieval. | Broad range of devices and protocols | Moderate | Offers raw and protocol-specific data handling | Structured data | | RF2 | Library focused on KaKu devices and protocol. | Specific devices and protocols| Lightweight | Decoding and encoding capabilities | Basic integration | -::: info +::: tip INFO RTL_433 library can only receive data, RCSwitch, PiLight, RF2 can receive and transmit. :::