chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity

[SYS] Reduce Logs flash footprint (#2232)

Browse Source 
By building only the log level required into LOG_LEVEL

Co-authored-by: Florian <1technophile@users.noreply.github.com>
This commit is contained in:
FlorianandFlorian authored and GitHub committed 2025-08-19 09:15:41 -05:00
1 parent 6e6b54b05e
commit 32174e37a5
52 files changed
+1187 -1136
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

main/sensorBME280.cpp
+13 -13
View File
@@ -58,7 +58,7 @@ void setupZsensorBME280() {
mySensor.settings.commInterface = I2C_MODE;
mySensor.settings.I2CAddress = BME280_i2c_addr;
Log.notice(F("Setup BME280/BMP280 on address: %X" CR), BME280_i2c_addr);
THEENGS_LOG_NOTICE(F("Setup BME280/BMP280 on address: %X" CR), BME280_i2c_addr);
//***Operation settings*****************************//
// runMode Setting - Values:
@@ -117,11 +117,11 @@ void setupZsensorBME280() {
int ret = mySensor.begin();
if (ret == 0x60) {
Log.notice(F("Bosch BME280 successfully initialized: %X" CR), ret);
THEENGS_LOG_NOTICE(F("Bosch BME280 successfully initialized: %X" CR), ret);
} else if (ret == 0x58) {
Log.notice(F("Bosch BMP280 successfully initialized: %X" CR), ret);
THEENGS_LOG_NOTICE(F("Bosch BMP280 successfully initialized: %X" CR), ret);
} else {
Log.notice(F("Bosch BME280/BMP280 failed: %X" CR), ret);
THEENGS_LOG_NOTICE(F("Bosch BME280/BMP280 failed: %X" CR), ret);
}
}
@@ -144,52 +144,52 @@ void MeasureTempHumAndPressure() {
// Check if reads failed and exit early (to try again).
if (isnan(BmeTempC) || isnan(BmeTempF) || isnan(BmeHum) || isnan(BmePa) || isnan(BmeAltiM) || isnan(BmeAltiFt)) {
Log.error(F("Failed to read from BME280/BMP280!" CR));
THEENGS_LOG_ERROR(F("Failed to read from BME280/BMP280!" CR));
} else {
Log.trace(F("Creating BME280/BMP280 buffer" CR));
THEENGS_LOG_TRACE(F("Creating BME280/BMP280 buffer" CR));
StaticJsonDocument<JSON_MSG_BUFFER> BME280dataBuffer;
JsonObject BME280data = BME280dataBuffer.to<JsonObject>();
// Generate Temperature in degrees C
if (BmeTempC != persisted_bme_tempc || bme280_always) {
BME280data["tempc"] = (float)BmeTempC;
} else {
Log.trace(F("Same Degrees C don't send it" CR));
THEENGS_LOG_TRACE(F("Same Degrees C don't send it" CR));
}
// Generate Temperature in degrees F
if (BmeTempF != persisted_bme_tempf || bme280_always) {
BME280data["tempf"] = (float)BmeTempF;
} else {
Log.trace(F("Same Degrees F don't send it" CR));
THEENGS_LOG_TRACE(F("Same Degrees F don't send it" CR));
}
// Generate Humidity in percent
if (BmeHum != persisted_bme_hum || bme280_always) {
BME280data["hum"] = (float)BmeHum;
} else {
Log.trace(F("Same Humidity don't send it" CR));
THEENGS_LOG_TRACE(F("Same Humidity don't send it" CR));
}
// Generate Pressure in Pa
if (BmePa != persisted_bme_pa || bme280_always) {
BME280data["pa"] = (float)BmePa;
} else {
Log.trace(F("Same Pressure don't send it" CR));
THEENGS_LOG_TRACE(F("Same Pressure don't send it" CR));
}
// Generate Altitude in Meter
if (BmeAltiM != persisted_bme_altim || bme280_always) {
Log.trace(F("Sending Altitude Meter to MQTT" CR));
THEENGS_LOG_TRACE(F("Sending Altitude Meter to MQTT" CR));
BME280data["altim"] = (float)BmeAltiM;
} else {
Log.trace(F("Same Altitude Meter don't send it" CR));
THEENGS_LOG_TRACE(F("Same Altitude Meter don't send it" CR));
}
// Generate Altitude in Feet
if (BmeAltiFt != persisted_bme_altift || bme280_always) {
BME280data["altift"] = (float)BmeAltiFt;
} else {
Log.trace(F("Same Altitude Feet don't send it" CR));
THEENGS_LOG_TRACE(F("Same Altitude Feet don't send it" CR));
}
BME280data["origin"] = BMETOPIC;
enqueueJsonObject(BME280data);