Add M5 boards compatibility and low power mode (#586)
This commit is contained in:
Florian authored and GitHub committed
1 parent
ac743ed350
commit
30147140bd
18 files changed
+753
-199
No files matched your search
@@ -0,0 +1,252 @@
|
||||
/*
|
||||
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
|
||||
|
||||
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
||||
Send and receiving command by MQTT
|
||||
|
||||
M5 boards management
|
||||
|
||||
Copyright: (c)Florian ROBERT
|
||||
|
||||
Contributors:
|
||||
- 1technophile
|
||||
|
||||
This file is part of OpenMQTTGateway.
|
||||
|
||||
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
OpenMQTTGateway is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "User_config.h"
|
||||
|
||||
#if defined(ZboardM5STICKC) || defined(ZboardM5STACK)
|
||||
#ifdef ZboardM5STICKC
|
||||
#include <M5StickC.h>
|
||||
#endif
|
||||
#ifdef ZboardM5STACK
|
||||
#include <M5Stack.h>
|
||||
#endif
|
||||
void logToLCD(bool display)
|
||||
{
|
||||
display ? Log.begin(LOG_LEVEL_LCD, &M5.Lcd) : Log.begin(LOG_LEVEL, &Serial); // Log on LCD following LOG_LEVEL_LCD
|
||||
}
|
||||
|
||||
void setBrightness(int brightness)
|
||||
{
|
||||
#ifdef ZboardM5STACK
|
||||
M5.Lcd.setBrightness(brightness * 2);
|
||||
#endif
|
||||
#ifdef ZboardM5STICKC
|
||||
(!brightness) ? M5.Axp.ScreenBreath(0) : M5.Axp.ScreenBreath(7 + (int)brightness * 0.08);
|
||||
#endif
|
||||
}
|
||||
|
||||
void setupM5()
|
||||
{
|
||||
Log.notice(F("Setup M5" CR));
|
||||
pinMode(SLEEP_BUTTON, INPUT);
|
||||
// M5 stack 320*240
|
||||
// M5StickC 160*80
|
||||
// M5Stick LCD not supported
|
||||
Log.notice(F("Low power set to: %d" CR), low_power_mode);
|
||||
switch (low_power_mode)// if LOW POWER the intro is bypassed and the brightness set to sleep brightness
|
||||
{
|
||||
case 0:
|
||||
wakeScreen(NORMAL_LCD_BRIGHTNESS);
|
||||
M5.Lcd.fillScreen(WHITE);
|
||||
displayIntro(M5.Lcd.width() * 0.25, (M5.Lcd.width() / 2) + M5.Lcd.width() * 0.12, (M5.Lcd.height()/2) + M5.Lcd.height() * 0.2);
|
||||
#ifdef LOG_TO_LCD
|
||||
Log.begin(LOG_LEVEL_LCD, &M5.Lcd); // Log on LCD following LOG_LEVEL_LCD
|
||||
#endif
|
||||
break;
|
||||
case 1:
|
||||
wakeScreen(SLEEP_LCD_BRIGHTNESS);
|
||||
M5.Lcd.fillScreen(WHITE);
|
||||
#ifdef LOG_TO_LCD
|
||||
Log.begin(LOG_LEVEL_LCD, &M5.Lcd); // Log on LCD following LOG_LEVEL_LCD
|
||||
#endif
|
||||
break;
|
||||
case 2:
|
||||
M5.begin(false,false,false);
|
||||
break;
|
||||
}
|
||||
Log.notice(F("Setup M5 end" CR));
|
||||
}
|
||||
|
||||
void sleepScreen()
|
||||
{
|
||||
Log.trace(F("Screen going to sleep" CR));
|
||||
#ifdef ZboardM5STACK
|
||||
M5.begin(false,false,false); // M5.lcd.sleep() provokes a reset of the ESP
|
||||
#endif
|
||||
#ifdef ZboardM5STICKC
|
||||
M5.Axp.ScreenBreath(0);
|
||||
M5.Axp.SetLDO2(false);
|
||||
#endif
|
||||
}
|
||||
|
||||
void wakeScreen(int brightness)
|
||||
{
|
||||
Log.trace(F("Screen wake up" CR));
|
||||
M5.begin();
|
||||
M5.Lcd.setCursor(0, 0, (M5.Lcd.height() > 200) ? 4:2);
|
||||
M5.Lcd.setTextSize(1);
|
||||
M5.Lcd.setRotation(1);
|
||||
setBrightness(brightness);
|
||||
}
|
||||
|
||||
void loopM5()
|
||||
{
|
||||
static int previousBtnState;
|
||||
int currentBtnState = digitalRead(SLEEP_BUTTON);
|
||||
if(currentBtnState != previousBtnState && currentBtnState == 0)
|
||||
{
|
||||
int newlow_power_mode = low_power_mode;
|
||||
(low_power_mode == 2) ? newlow_power_mode = 0 : newlow_power_mode = newlow_power_mode + 1;
|
||||
changelow_power_mode(newlow_power_mode);
|
||||
}
|
||||
previousBtnState = currentBtnState;
|
||||
static int previousLogLevel;
|
||||
switch (Log.getLastMsgLevel())
|
||||
{
|
||||
case 1:
|
||||
case 2:
|
||||
if (low_power_mode != 2)
|
||||
{
|
||||
wakeScreen(NORMAL_LCD_BRIGHTNESS);
|
||||
M5.Lcd.fillScreen(TFT_RED); // FATAL, ERROR
|
||||
M5.Lcd.setTextColor(TFT_BLACK, TFT_RED);
|
||||
}
|
||||
break;
|
||||
case 3:
|
||||
if (low_power_mode != 2)
|
||||
{
|
||||
wakeScreen(NORMAL_LCD_BRIGHTNESS);
|
||||
M5.Lcd.fillScreen(TFT_ORANGE); // WARNING
|
||||
M5.Lcd.setTextColor(TFT_BLACK, TFT_ORANGE);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
if (previousLogLevel != Log.getLastMsgLevel() && low_power_mode != 2)
|
||||
{
|
||||
wakeScreen(SLEEP_LCD_BRIGHTNESS);
|
||||
M5.Lcd.fillScreen(TFT_WHITE);
|
||||
drawLogo(M5.Lcd.width() * 0.1875, (M5.Lcd.width()/2) - M5.Lcd.width() * 0.24, M5.Lcd.height() * 0.5, true, true, true, true, true, true);
|
||||
}
|
||||
break;
|
||||
}
|
||||
previousLogLevel = Log.getLastMsgLevel();
|
||||
}
|
||||
|
||||
void MQTTtoM5(char *topicOri, JsonObject &M5data)
|
||||
{ // json object decoding
|
||||
if (cmpToMainTopic(topicOri, subjectMQTTtoM5set))
|
||||
{
|
||||
Log.trace(F("MQTTtoM5 json set" CR));
|
||||
// Log display set between M5 lcd (true) and serial monitor (false)
|
||||
if (M5data.containsKey("log-lcd"))
|
||||
{
|
||||
bool displayOnLCD = M5data["log-lcd"];
|
||||
Log.notice(F("Set lcd log: %T" CR), displayOnLCD);
|
||||
logToLCD(displayOnLCD);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void displayIntro(int i, int X, int Y)
|
||||
{
|
||||
Log.trace(F("Intro display on screen" CR));
|
||||
drawLogo(i, X, Y, false, true, false, false, false, false);
|
||||
delay(50);
|
||||
drawLogo(i, X, Y, false, false, true, false, false, false);
|
||||
delay(50);
|
||||
drawLogo(i, X, Y, false, true, false, false, false, false);
|
||||
delay(50);
|
||||
drawLogo(i, X, Y, false, true, true, false, false, false);
|
||||
delay(50);
|
||||
drawLogo(i, X, Y, false, true, true, true, false, false);
|
||||
delay(50);
|
||||
drawLogo(i, X, Y, false, true, true, false, true, false);
|
||||
delay(50);
|
||||
drawLogo(i, X, Y, false, true, true, true, true, false);
|
||||
delay(50);
|
||||
drawLogo(i, X, Y, true, true, true, true, true, false);
|
||||
}
|
||||
|
||||
void drawLogo(int logoSize, int circle1X, int circle1Y, bool circle1, bool circle2, bool circle3, bool line1, bool line2, bool name)
|
||||
{
|
||||
int circle1T = logoSize / 15;
|
||||
int circle2T = logoSize / 25;
|
||||
int circle3T = logoSize / 30;
|
||||
|
||||
int circle3Y = circle1Y - (logoSize * 1.2);
|
||||
int circle3X = circle1X - (logoSize * 0.13);
|
||||
int circle2X = circle1X - (logoSize * 1.05);
|
||||
int circle2Y = circle1Y - (logoSize * 0.8);
|
||||
|
||||
if (line1)
|
||||
{
|
||||
M5.Lcd.drawLine(circle1X - 2, circle1Y, circle2X - 2, circle2Y, BLUE);
|
||||
M5.Lcd.drawLine(circle1X - 1, circle1Y, circle2X - 1, circle2Y, BLUE);
|
||||
M5.Lcd.drawLine(circle1X, circle1Y, circle2X, circle2Y, BLUE);
|
||||
M5.Lcd.drawLine(circle1X + 1, circle1Y, circle2X + 1, circle2Y, BLUE);
|
||||
M5.Lcd.drawLine(circle1X + 2, circle1Y, circle2X + 2, circle2Y, BLUE);
|
||||
M5.Lcd.fillCircle(circle3X, circle3Y, logoSize / 4 - circle3T * 2, WHITE);
|
||||
}
|
||||
if (line2)
|
||||
{
|
||||
M5.Lcd.drawLine(circle1X - 2, circle1Y, circle3X - 2, circle3Y, BLUE);
|
||||
M5.Lcd.drawLine(circle1X - 1, circle1Y, circle3X - 1, circle3Y, BLUE);
|
||||
M5.Lcd.drawLine(circle1X, circle1Y, circle3X, circle3Y, BLUE);
|
||||
M5.Lcd.drawLine(circle1X + 1, circle1Y, circle3X + 1, circle3Y, BLUE);
|
||||
M5.Lcd.fillCircle(circle2X, circle2Y, logoSize / 3 - circle2T * 2, WHITE);
|
||||
}
|
||||
M5.Lcd.fillCircle(circle1X, circle1Y, logoSize / 2 - circle1T * 2, WHITE);
|
||||
if (circle1)
|
||||
{
|
||||
M5.Lcd.fillCircle(circle1X, circle1Y, logoSize / 2, WHITE);
|
||||
M5.Lcd.fillCircle(circle1X, circle1Y, logoSize / 2 - circle1T, TFT_GREEN);
|
||||
M5.Lcd.fillCircle(circle1X, circle1Y, logoSize / 2 - circle1T * 2, WHITE);
|
||||
}
|
||||
if (circle2)
|
||||
{
|
||||
M5.Lcd.fillCircle(circle2X, circle2Y, logoSize / 3, WHITE);
|
||||
M5.Lcd.fillCircle(circle2X, circle2Y, logoSize / 3 - circle2T, TFT_ORANGE);
|
||||
M5.Lcd.fillCircle(circle2X, circle2Y, logoSize / 3 - circle2T * 2, WHITE);
|
||||
}
|
||||
if (circle3)
|
||||
{
|
||||
M5.Lcd.fillCircle(circle3X, circle3Y, logoSize / 4, WHITE);
|
||||
M5.Lcd.fillCircle(circle3X, circle3Y, logoSize / 4 - circle3T, TFT_PINK);
|
||||
M5.Lcd.fillCircle(circle3X, circle3Y, logoSize / 4 - circle3T * 2, WHITE);
|
||||
}
|
||||
if (name)
|
||||
{
|
||||
M5.Lcd.setTextColor(BLUE);
|
||||
M5.Lcd.drawString("penMQTTGateway", circle1X + (circle1X * 0.27), circle1Y, (M5.Lcd.height() > 200) ? 4:2);
|
||||
}
|
||||
}
|
||||
|
||||
void M5Display(char * line1, char * line2, char * line3)
|
||||
{
|
||||
if (low_power_mode == 2) digitalWrite(LOW_POWER_LED, 1 - LOW_POWER_LED_OFF);
|
||||
wakeScreen(NORMAL_LCD_BRIGHTNESS);
|
||||
M5.Lcd.fillScreen(TFT_WHITE);
|
||||
drawLogo(M5.Lcd.width() * 0.1875, (M5.Lcd.width()/2) - M5.Lcd.width() * 0.24, M5.Lcd.height() * 0.5, true, true, true, true, true, true);
|
||||
M5.Lcd.setTextColor(BLUE);
|
||||
M5.Lcd.drawString(line1, 5, M5.Lcd.height() * 0.7, 1);
|
||||
M5.Lcd.drawString(line2, 5, M5.Lcd.height() * 0.8, 1);
|
||||
M5.Lcd.drawString(line3, 5, M5.Lcd.height() * 0.9, 1);
|
||||
delay(2000);
|
||||
digitalWrite(LOW_POWER_LED, LOW_POWER_LED_OFF); // to switch off no need of condition
|
||||
}
|
||||
#endif
|
||||
Reference in new issue
Block a user