Recover ESP8266 build and ESPWifiManualSetup

#563  Move protocol change method outside of wifimanager scope
and correct build error for ESP8266

main/User_config.h

@@ -107,7 +107,6 @@ char mqtt_topic[mqtt_topic_max_size] = Base_Topic;
 char gateway_name[parameters_size * 2] = Gateway_Name;
 
 #if defined(ESP8266)||defined(ESP32) 
-  #include "esp_wifi.h"
   #define ATTEMPTS_BEFORE_BG  10 // Number of wifi connection attempts before going to BG protocol
   #define ATTEMPTS_BEFORE_B   20 // Number of wifi connection attempts before going to B protocol
 #endif
@@ -115,6 +114,7 @@ char gateway_name[parameters_size * 2] = Gateway_Name;
 // WIFI mode, uncomment to force a wifi mode, if not uncommented the ESP will connect without a mode forced
 // if there is a reconnection issue it will try to connect with G mode and if not working with B mode
 #ifdef ESP32
+  #include "esp_wifi.h"
   uint8_t wifiProtocol = 0; // default mode, automatic selection
   //uint8_t wifiProtocol = WIFI_PROTOCOL_11B;
   //uint8_t wifiProtocol = WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G; // can't have only one https://github.com/espressif/esp-idf/issues/702

main/main.ino

@@ -134,7 +134,6 @@ int failure_number_mqtt = 0; // number of failure connecting to MQTT
 #elif defined(ESP8266)
   #include <FS.h>
   #include <ESP8266WiFi.h>
-  #include "esp_wifi.h"
   #include <ArduinoOTA.h>
   #include <DNSServer.h>
   #include <ESP8266WebServer.h>
@@ -753,6 +752,27 @@ void setup()
   Log.notice(F("Setup OpenMQTTGateway end" CR));
 }
 
+#if defined(ESP8266) || defined(ESP32)
+// the 2 methods below are used to recover wifi connection by changing the protocols
+void forceWifiProtocol(){
+#ifdef ESP32
+  Log.trace(F("ESP32: Forcing to wifi %d" CR), wifiProtocol);
+  esp_wifi_set_protocol(WIFI_IF_STA, wifiProtocol);
+#elif ESP8266
+  Log.trace(F("ESP8266: Forcing to wifi %d" CR), wifiProtocol);
+  WiFi.setPhyMode((WiFiPhyMode_t)wifiProtocol);
+#endif
+}
+
+void reinit_wifi()
+{
+  delay(10);
+  WiFi.mode(WIFI_STA);
+  if (!wifiProtocol) forceWifiProtocol();
+  WiFi.begin();
+}
+#endif
+
 #if defined(ESPWifiManualSetup)
 void setup_wifi()
 {
@@ -843,16 +863,6 @@ void eraseAndRestart()
   #endif
 }
 
-void forceWifiProtocol(){
-#ifdef ESP32
-  Log.trace(F("ESP32: Forcing to wifi %d" CR), wifiProtocol);
-  esp_wifi_set_protocol(WIFI_IF_STA, wifiProtocol);
-#elif ESP8266
-  Log.trace(F("ESP8266: Forcing to wifi %d" CR), wifiProtocol);
-  WiFi.setPhyMode(wifiProtocol);
-#endif
-}
-
 void setup_wifimanager(bool reset_settings)
 {
 
@@ -1010,16 +1020,6 @@ void setup_wifimanager(bool reset_settings)
   }
 }
 
-void reinit_wifi()
-{
-
-  delay(10);
-  WiFi.mode(WIFI_STA);
-  if (!wifiProtocol) forceWifiProtocol();
-  WiFi.begin();
-
-}
-
 #else // Arduino case
 void setup_ethernet()
 {