Update IRRemote ESP8266 to 2.6.2 and add ESP32 support

lib/IRremoteESP8266/examples/IRrecvDumpV2/IRrecvDumpV2.ino

@@ -19,27 +19,30 @@
  * Based on Ken Shirriff's IrsendDemo Version 0.1 July, 2009,
  */
 
-#ifndef UNIT_TEST
 #include <Arduino.h>
-#endif
 #include <IRrecv.h>
 #include <IRremoteESP8266.h>
 #include <IRutils.h>
 // The following are only needed for extended decoding of A/C Messages
+#include <ir_Argo.h>
 #include <ir_Coolix.h>
 #include <ir_Daikin.h>
 #include <ir_Fujitsu.h>
+#include <ir_Goodweather.h>
 #include <ir_Gree.h>
 #include <ir_Haier.h>
 #include <ir_Hitachi.h>
 #include <ir_Kelvinator.h>
 #include <ir_Midea.h>
 #include <ir_Mitsubishi.h>
+#include <ir_MitsubishiHeavy.h>
 #include <ir_Panasonic.h>
 #include <ir_Samsung.h>
+#include <ir_Sharp.h>
 #include <ir_Tcl.h>
 #include <ir_Teco.h>
 #include <ir_Toshiba.h>
+#include <ir_Trotec.h>
 #include <ir_Vestel.h>
 #include <ir_Whirlpool.h>
 
@@ -117,8 +120,15 @@ IRrecv irrecv(kRecvPin, kCaptureBufferSize, kTimeout, true);
 decode_results results;  // Somewhere to store the results
 
 // Display the human readable state of an A/C message if we can.
-void dumpACInfo(decode_results *results) {
+void dumpACInfo(const decode_results * const results) {
   String description = "";
+#if DECODE_ARGO
+  if (results->decode_type == ARGO) {
+    IRArgoAC ac(0);
+    ac.setRaw(results->state);
+    description = ac.toString();
+  }
+#endif  // DECODE_ARGO
 #if DECODE_DAIKIN
   if (results->decode_type == DAIKIN) {
     IRDaikinESP ac(0);
@@ -133,6 +143,13 @@ void dumpACInfo(decode_results *results) {
     description = ac.toString();
   }
 #endif  // DECODE_DAIKIN2
+#if DECODE_DAIKIN216
+  if (results->decode_type == DAIKIN216) {
+    IRDaikin216 ac(0);
+    ac.setRaw(results->state);
+    description = ac.toString();
+  }
+#endif  // DECODE_DAIKIN216
 #if DECODE_FUJITSU_AC
   if (results->decode_type == FUJITSU_AC) {
     IRFujitsuAC ac(0);
@@ -154,6 +171,18 @@ void dumpACInfo(decode_results *results) {
     description = ac.toString();
   }
 #endif  // DECODE_MITSUBISHI_AC
+#if DECODE_MITSUBISHIHEAVY
+  if (results->decode_type == MITSUBISHI_HEAVY_88) {
+    IRMitsubishiHeavy88Ac ac(0);
+    ac.setRaw(results->state);
+    description = ac.toString();
+  }
+  if (results->decode_type == MITSUBISHI_HEAVY_152) {
+    IRMitsubishiHeavy152Ac ac(0);
+    ac.setRaw(results->state);
+    description = ac.toString();
+  }
+#endif  // DECODE_MITSUBISHIHEAVY
 #if DECODE_TOSHIBA_AC
   if (results->decode_type == TOSHIBA_AC) {
     IRToshibaAC ac(0);
@@ -161,6 +190,20 @@ void dumpACInfo(decode_results *results) {
     description = ac.toString();
   }
 #endif  // DECODE_TOSHIBA_AC
+#if DECODE_TROTEC
+  if (results->decode_type == TROTEC) {
+    IRTrotecESP ac(0);
+    ac.setRaw(results->state);
+    description = ac.toString();
+  }
+#endif  // DECODE_TROTEC
+#if DECODE_GOODWEATHER
+  if (results->decode_type == GOODWEATHER) {
+    IRGoodweatherAc ac(0);
+    ac.setRaw(results->value);  // Goodweather uses value instead of state.
+    description = ac.toString();
+  }
+#endif  // DECODE_GOODWEATHER
 #if DECODE_GREE
   if (results->decode_type == GREE) {
     IRGreeAC ac(0);
@@ -196,6 +239,13 @@ void dumpACInfo(decode_results *results) {
     description = ac.toString();
   }
 #endif  // DECODE_SAMSUNG_AC
+#if DECODE_SHARP_AC
+  if (results->decode_type == SHARP_AC) {
+    IRSharpAc ac(0);
+    ac.setRaw(results->state);
+    description = ac.toString();
+  }
+#endif  // DECODE_SHARP_AC
 #if DECODE_COOLIX
   if (results->decode_type == COOLIX) {
     IRCoolixAC ac(0);
@@ -250,9 +300,13 @@ void dumpACInfo(decode_results *results) {
   if (description != "") Serial.println("Mesg Desc.: " + description);
 }
 
-// The section of code run only once at start-up.
+// This section of code runs only once at start-up.
 void setup() {
+#if defined(ESP8266)
   Serial.begin(kBaudRate, SERIAL_8N1, SERIAL_TX_ONLY);
+#else  // ESP8266
+  Serial.begin(kBaudRate, SERIAL_8N1);
+#endif  // ESP8266
   while (!Serial)  // Wait for the serial connection to be establised.
     delay(50);
   Serial.println();

lib/IRremoteESP8266/examples/IRrecvDumpV2/platformio.ini

@@ -6,11 +6,23 @@ src_dir=.
 build_flags =
 lib_deps_builtin =
 lib_deps_external =
+lib_ldf_mode = chain+
 
 [env:nodemcuv2]
 platform = espressif8266
 framework = arduino
 board = nodemcuv2
+lib_ldf_mode = ${common.lib_ldf_mode}
+build_flags = ${common.build_flags}
+lib_deps =
+  ${common.lib_deps_builtin}
+  ${common.lib_deps_external}
+
+[env:esp32dev]
+platform = espressif32
+framework = arduino
+board = esp32dev
+lib_ldf_mode = ${common.lib_ldf_mode}
 build_flags = ${common.build_flags}
 lib_deps =
   ${common.lib_deps_builtin}