chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity

[BOARDS] Remove Arduino boards (#1929)

Browse Source
This commit is contained in:
Florian authored and GitHub committed 2024-04-10 15:48:05 -05:00
1 parent 30f8264878
commit 2065d57e11
98 files changed
+336 -571
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

main/User_config.h
+10 -36
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This program enables to:
@@ -145,23 +145,17 @@ const byte mac[] = {0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95}; //W5100 ethernet shield
/*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
//MQTT Parameters definition
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
# define parameters_size 65
# define mqtt_topic_max_size 150
# ifndef mqtt_max_packet_size
# ifdef MQTT_HTTPS_FW_UPDATE
# ifndef CHECK_OTA_UPDATE
# define CHECK_OTA_UPDATE true // enable to check for the presence of a new version for your environment on Github
# endif
# define mqtt_max_packet_size 2560
# else
# define mqtt_max_packet_size 1024
#define parameters_size 65
#define mqtt_topic_max_size 150
#ifndef mqtt_max_packet_size
# ifdef MQTT_HTTPS_FW_UPDATE
# ifndef CHECK_OTA_UPDATE
# define CHECK_OTA_UPDATE true // enable to check for the presence of a new version for your environment on Github
# endif
# define mqtt_max_packet_size 2560
# else
# define mqtt_max_packet_size 1024
# endif
#else
# define parameters_size 30
# define mqtt_topic_max_size 75
# define mqtt_max_packet_size 128
#endif
#ifndef MQTT_USER
@@ -429,10 +423,6 @@ int lowpowermode = DEFAULT_LOW_POWER_MODE;
//# define LED_SEND_RECEIVE 40
# elif ESP32
//# define LED_SEND_RECEIVE 40
# elif __AVR_ATmega2560__ //arduino mega
//# define LED_SEND_RECEIVE 40
# else //arduino uno/nano
//# define LED_SEND_RECEIVE 40
# endif
# endif
# ifndef LED_SEND_RECEIVE_ON
@@ -443,10 +433,6 @@ int lowpowermode = DEFAULT_LOW_POWER_MODE;
//# define LED_ERROR 42
# elif ESP32
//# define LED_ERROR 42
# elif __AVR_ATmega2560__ //arduino mega
//# define LED_ERROR 42
# else //arduino uno/nano
//# define LED_ERROR 42
# endif
# endif
# ifndef LED_ERROR_ON
@@ -457,10 +443,6 @@ int lowpowermode = DEFAULT_LOW_POWER_MODE;
//# define LED_INFO 44
# elif ESP32
//# define LED_INFO 44
# elif __AVR_ATmega2560__ //arduino mega
//# define LED_INFO 44
# else //arduino uno/nano
//# define LED_INFO 44
# endif
# endif
# ifndef LED_INFO_ON
@@ -681,14 +663,6 @@ Adafruit_NeoPixel leds2(ANEOPIX_IND_NUM_LEDS, ANEOPIX_IND_DATA_GPIO2, ANEOPIX_IN
# define JSON_MSG_BUFFER 512 // Json message max buffer size, don't put 768 or higher it is causing unexpected behaviour on ESP8266
# define SIGNAL_SIZE_UL_ULL uint64_t
# define STRTO_UL_ULL strtoull
#elif defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
# define JSON_MSG_BUFFER 512 // Json message max buffer size, don't put 1024 or higher
# define SIGNAL_SIZE_UL_ULL uint64_t
# define STRTO_UL_ULL strtoul
#else // boards with smaller memory
# define JSON_MSG_BUFFER 64 // Json message max buffer size, don't put 1024 or higher
# define SIGNAL_SIZE_UL_ULL uint32_t
# define STRTO_UL_ULL strtoul
#endif
#if defined(ZgatewayRF) || defined(ZgatewayIR) || defined(ZgatewaySRFB) || defined(ZgatewayWeatherStation) || defined(ZgatewayRTL_433)
main/ZactuatorFASTLED.ino
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
This gateway enables to use RGBLED strips like WS2812
main/ZactuatorONOFF.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
Output GPIO defined to High or Low
main/ZactuatorPWM.ino
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP32, ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
This actuator enables control over the PWM outputs of microcontrollers.
main/ZactuatorSomfy.ino
+2 -2
View File
@@ -1,6 +1,6 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This actor enables to:
main/Zblufi.ino
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This program enables to:
main/ZboardM5.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
M5 boards management
main/ZcommonRF.ino
+51 -62
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your BLE/433mhz/infrared IR signal and an MQTT broker
Send and receiving command by MQTT
@@ -25,14 +25,13 @@
#include "User_config.h"
#if defined(ZgatewayRF) || defined(ZgatewayPilight) || defined(ZgatewayRTL_433) || defined(ZgatewayRF2) || defined(ZactuatorSomfy)
# ifndef ARDUINO_AVR_UNO
# ifdef ZradioCC1101
# include <ELECHOUSE_CC1101_SRC_DRV.h>
# endif
# ifdef ZradioCC1101
# include <ELECHOUSE_CC1101_SRC_DRV.h>
# endif
void initCC1101() {
# ifdef ZradioCC1101 //receiving with CC1101
# ifdef ZradioCC1101 //receiving with CC1101
// Loop on getCC1101() until it returns true and break after 10 attempts
int delayMS = 16;
int delayMaxMS = 500;
@@ -50,7 +49,7 @@ void initCC1101() {
delayMS = delayMS * 2;
if (delayMS > delayMaxMS) delayMS = delayMaxMS;
}
# endif
# endif
}
void setupCommonRF() {
@@ -71,105 +70,101 @@ bool validFrequency(float mhz) {
int currentReceiver = ACTIVE_NONE;
# if !defined(ZgatewayRFM69) && !defined(ZactuatorSomfy)
# if defined(ESP8266) || defined(ESP32)
# if !defined(ZgatewayRFM69) && !defined(ZactuatorSomfy)
# if defined(ESP8266) || defined(ESP32)
// Check if a receiver is available
bool validReceiver(int receiver) {
switch (receiver) {
# ifdef ZgatewayPilight
# ifdef ZgatewayPilight
case ACTIVE_PILIGHT:
return true;
# endif
# ifdef ZgatewayRF
# endif
# ifdef ZgatewayRF
case ACTIVE_RF:
return true;
# endif
# ifdef ZgatewayRTL_433
# endif
# ifdef ZgatewayRTL_433
case ACTIVE_RTL:
return true;
# endif
# ifdef ZgatewayRF2
# endif
# ifdef ZgatewayRF2
case ACTIVE_RF2:
return true;
# endif
# endif
default:
Log.error(F("ERROR: stored receiver %d not available" CR), receiver);
}
return false;
}
# endif
# endif
# endif
void disableCurrentReceiver() {
Log.trace(F("disableCurrentReceiver: %d" CR), currentReceiver);
switch (currentReceiver) {
case ACTIVE_NONE:
break;
# ifdef ZgatewayPilight
# ifdef ZgatewayPilight
case ACTIVE_PILIGHT:
disablePilightReceive();
break;
# endif
# ifdef ZgatewayRF
# endif
# ifdef ZgatewayRF
case ACTIVE_RF:
disableRFReceive();
break;
# endif
# ifdef ZgatewayRTL_433
# endif
# ifdef ZgatewayRTL_433
case ACTIVE_RTL:
disableRTLreceive();
break;
# endif
# ifdef ZgatewayRF2
# endif
# ifdef ZgatewayRF2
case ACTIVE_RF2:
disableRF2Receive();
break;
# endif
# ifndef ARDUINO_AVR_UNO // Space issues with the UNO
# endif
default:
Log.error(F("ERROR: unsupported receiver %d" CR), RFConfig.activeReceiver);
# endif
}
}
void enableActiveReceiver() {
Log.trace(F("enableActiveReceiver: %d" CR), RFConfig.activeReceiver);
switch (RFConfig.activeReceiver) {
# ifdef ZgatewayPilight
# ifdef ZgatewayPilight
case ACTIVE_PILIGHT:
initCC1101();
enablePilightReceive();
currentReceiver = ACTIVE_PILIGHT;
break;
# endif
# ifdef ZgatewayRF
# endif
# ifdef ZgatewayRF
case ACTIVE_RF:
initCC1101();
enableRFReceive();
currentReceiver = ACTIVE_RF;
break;
# endif
# ifdef ZgatewayRTL_433
# endif
# ifdef ZgatewayRTL_433
case ACTIVE_RTL:
initCC1101();
enableRTLreceive();
currentReceiver = ACTIVE_RTL;
break;
# endif
# ifdef ZgatewayRF2
# endif
# ifdef ZgatewayRF2
case ACTIVE_RF2:
initCC1101();
enableRF2Receive();
currentReceiver = ACTIVE_RF2;
break;
# endif
# endif
case ACTIVE_RECERROR:
Log.error(F("ERROR: no receiver selected" CR));
break;
# ifndef ARDUINO_AVR_UNO // Space issues with the UNO
default:
Log.error(F("ERROR: unsupported receiver %d" CR), RFConfig.activeReceiver);
# endif
}
}
@@ -178,20 +173,20 @@ String stateRFMeasures() {
StaticJsonDocument<JSON_MSG_BUFFER> jsonBuffer;
JsonObject RFdata = jsonBuffer.to<JsonObject>();
RFdata["active"] = RFConfig.activeReceiver;
# if defined(ZradioCC1101) || defined(ZradioSX127x)
# if defined(ZradioCC1101) || defined(ZradioSX127x)
RFdata["frequency"] = RFConfig.frequency;
if (RFConfig.activeReceiver == ACTIVE_RTL) {
# ifdef ZgatewayRTL_433
# ifdef ZgatewayRTL_433
RFdata["rssithreshold"] = (int)getRTLrssiThreshold();
RFdata["rssi"] = (int)getRTLCurrentRSSI();
RFdata["avgrssi"] = (int)getRTLAverageRSSI();
RFdata["count"] = (int)getRTLMessageCount();
# endif
# ifdef ZradioSX127x
RFdata["ookthreshold"] = (int)getOOKThresh();
# endif
}
# endif
# ifdef ZradioSX127x
RFdata["ookthreshold"] = (int)getOOKThresh();
# endif
}
# endif
pub(subjectcommonRFtoMQTT, RFdata);
String output;
@@ -211,21 +206,21 @@ void RFConfig_fromJson(JsonObject& RFdata) {
Config_update(RFdata, "active", RFConfig.activeReceiver);
success = true;
}
# ifdef ZgatewayRTL_433
# ifdef ZgatewayRTL_433
if (RFdata.containsKey("rssithreshold")) {
Log.notice(F("RTL_433 RSSI Threshold : %d " CR), RFConfig.rssiThreshold);
Config_update(RFdata, "rssithreshold", RFConfig.rssiThreshold);
rtl_433.setRSSIThreshold(RFConfig.rssiThreshold);
success = true;
}
# if defined(RF_SX1276) || defined(RF_SX1278)
# if defined(RF_SX1276) || defined(RF_SX1278)
if (RFdata.containsKey("ookthreshold")) {
Config_update(RFdata, "ookthreshold", RFConfig.newOokThreshold);
Log.notice(F("RTL_433 ookThreshold %d" CR), RFConfig.newOokThreshold);
rtl_433.setOOKThreshold(RFConfig.newOokThreshold);
success = true;
}
# endif
# endif
if (RFdata.containsKey("status")) {
Log.notice(F("RF get status:" CR));
rtl_433.getStatus();
@@ -234,10 +229,10 @@ void RFConfig_fromJson(JsonObject& RFdata) {
if (!success) {
Log.error(F("MQTTtoRF Fail json" CR));
}
# endif
# endif
disableCurrentReceiver();
enableActiveReceiver();
# ifdef ESP32
# ifdef ESP32
if (RFdata.containsKey("erase") && RFdata["erase"].as<bool>()) {
// Erase config from NVS (non-volatile storage)
preferences.begin(Gateway_Short_Name, false);
@@ -257,10 +252,10 @@ void RFConfig_fromJson(JsonObject& RFdata) {
jo["frequency"] = RFConfig.frequency;
jo["active"] = RFConfig.activeReceiver;
// Don't save those for now, need to be tested
# ifdef ZgatewayRTL_433
# ifdef ZgatewayRTL_433
//jo["rssithreshold"] = RFConfig.rssiThreshold;
//jo["ookthreshold"] = RFConfig.newOokThreshold;
# endif
# endif
// Save config into NVS (non-volatile storage)
String conf = "";
serializeJson(jsonBuffer, conf);
@@ -269,7 +264,7 @@ void RFConfig_fromJson(JsonObject& RFdata) {
preferences.end();
Log.notice(F("RF Config_save: %s, result: %d" CR), conf.c_str(), result);
}
# endif
# endif
}
void RFConfig_init() {
@@ -280,7 +275,7 @@ void RFConfig_init() {
}
void RFConfig_load() {
# ifdef ESP32
# ifdef ESP32
StaticJsonDocument<JSON_MSG_BUFFER> jsonBuffer;
preferences.begin(Gateway_Short_Name, true);
if (preferences.isKey("RFConfig")) {
@@ -302,9 +297,9 @@ void RFConfig_load() {
Log.notice(F("RF Config not found using default" CR));
enableActiveReceiver();
}
# else
# else
enableActiveReceiver();
# endif
# endif
}
void MQTTtoRFset(char* topicOri, JsonObject& RFdata) {
@@ -330,10 +325,4 @@ void MQTTtoRFset(char* topicOri, JsonObject& RFdata) {
stateRFMeasures();
}
}
# else
void RFConfig_init() {}
void RFConfig_load() {}
void MQTTtoRFset(char* topicOri, JsonObject& RFdata) {}
void enableActiveReceiver() {}
# endif
#endif
main/ZdisplaySSD1306.ino
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
Supported boards with displays
main/Zgateway2G.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This gateway enables to:
main/ZgatewayBT.ino
+2 -4
View File
@@ -1,13 +1,11 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal/BLE and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This gateway enables to:
- publish MQTT data to a different topic related to BLE devices rssi signal
- publish MQTT data related to mi flora temperature, moisture, fertility and lux
- publish MQTT data related to mi jia indoor temperature & humidity sensor
- publish MQTT data to a topic related to BLE devices data
Copyright: (c)Florian ROBERT
main/ZgatewayGFSunInverter.ino
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your GridFree SUN-2000G inverter and a MQTT broker.
Send inverter metrics by MQTT.
main/ZgatewayIR.ino
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This gateway enables to:
main/ZgatewayLORA.ino
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR/BLE signal and a MQTT broker
Send and receiving command by MQTT
main/ZgatewayPilight.ino
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This gateway enables to:
main/ZgatewayRF.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This gateway enables to:
main/ZgatewayRF2.ino
+2 -4
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This gateway enables to:
@@ -292,9 +292,7 @@ void MQTTtoRF2(char* topicOri, JsonObject& RF2data) { // json object decoding
// we acknowledge the sending by publishing the value to an acknowledgement topic, for the moment even if it is a signal repetition we acknowledge also
pub(subjectRF2toMQTT, RF2data);
} else {
# ifndef ARDUINO_AVR_UNO // Space issues with the UNO
pub(subjectGTWRF2toMQTT, "{\"Status\": \"Error\"}"); // Fail feedback
# endif
Log.error(F("MQTTtoRF2 failed json read" CR));
}
enableActiveReceiver();
main/ZgatewayRFM69.ino
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your RF/infrared IR signal and a MQTT broker
Send and receiving command by MQTT
main/ZgatewayRS232.ino
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your RS232 device and a MQTT broker
Send and receiving command by MQTT
main/ZgatewayRTL_433.ino
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This gateway enables to:
main/ZgatewaySRFB.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This gateway enables to:
main/ZgatewayWeatherStation.ino
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This gateway enables to:
main/ZmqttDiscovery.ino
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Home Assistant MQTT Discovery addon.
main/ZsensorADC.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
Analog GPIO reading Addon
main/ZsensorAHTx0.ino
+7 -7
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Climate Addon:
@@ -13,12 +13,12 @@
Connection Schemata:
--------------------
AHT10 ------> Arduino Uno ----------> ESP8266
AHT10 ------> ESP8266
==============================================
Vcc ---------> 5V -------------------> 3v3 (3V)
GND ---------> GND ------------------> GND
SCL ---------> Pin A5 ---------------> D1
SDA ---------> Pin A4 ---------------> D2
Vcc ---------> 3v3 (3V)
GND ---------> GND
SCL ---------> D1
SDA ---------> D2
This file is part of OpenMQTTGateway.
main/ZsensorBH1750.ino
+8 -8
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Light Meter Addon:
@@ -11,13 +11,13 @@
Connection Schemata:
--------------------
BH1750 ------> Arduino Uno ----------> ESP8266
BH1750 ------> ESP8266
==============================================
Vcc ---------> 5V -------------------> Vu (5V)
GND ---------> GND ------------------> GND
SCL ---------> Pin A5 ---------------> D1
SDA ---------> Pin A4 ---------------> D2
ADD ---------> N/C (Not Connected) --> N/C (Not Connected)
Vcc ---------> Vu (5V)
GND ---------> GND
SCL ---------> D1
SDA ---------> D2
ADD ---------> N/C (Not Connected)
Copyright: (c) Hans-Juergen Dinges
main/ZsensorBME280.ino
+6 -6
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Climate Addon:
@@ -13,12 +13,12 @@
Connection Schemata:
--------------------
BME280/BMP280 ------> Arduino Uno ----------> ESP8266
BME280/BMP280 ------> ESP8266
=====================================================
Vcc ----------------> 5V/3.3V ----------> 5V/3.3V (5V or 3.3V depends on the BME280/BMP280 board variant)
GND ----------------> GND ----------> GND
SCL ----------------> Pin A5 ----------> D1
SDA ----------------> Pin A4 ----------> D2
Vcc ----------------> 5V/3.3V (5V or 3.3V depends on the BME280/BMP280 board variant)
GND ----------------> GND
SCL ----------------> D1
SDA ----------------> D2
Copyright: (c) Hans-Juergen Dinges
main/ZsensorC37_YL83_HMRD.ino
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR/BLE signal and a MQTT broker
Send and receiving command by MQTT
main/ZsensorDHT.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
DHT reading Addon
main/ZsensorDS1820.ino
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR/BLE signal and a MQTT broker
Send and receiving command by MQTT
main/ZsensorGPIOInput.ino
+2 -2
View File
@@ -1,6 +1,6 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
GPIO Input derived from HC SR-501 reading Addon and https://www.arduino.cc/en/Tutorial/Debounce
main/ZsensorGPIOKeyCode.ino
+2 -2
View File
@@ -1,6 +1,6 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
GPIO KeyCode derived from GPIO Input
main/ZsensorHCSR04.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
HC SR-04 reading Addon
main/ZsensorHCSR501.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
HC SR-501 reading Addon
main/ZsensorHTU21.ino
+7 -7
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Climate Addon:
@@ -13,12 +13,12 @@
Connection Schemata:
--------------------
HTU21 ------> Arduino Uno ----------> ESP8266
HTU21 ------> ESP8266
==============================================
Vcc ---------> 5V -------------------> Vu (5V)
GND ---------> GND ------------------> GND
SCL ---------> Pin A5 ---------------> D1
SDA ---------> Pin A4 ---------------> D2
Vcc ---------> Vu (5V)
GND ---------> GND
SCL ---------> D1
SDA ---------> D2
This file is part of OpenMQTTGateway.
main/ZsensorINA226.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
INA226 reading Addon
main/ZsensorLM75.ino
+6 -6
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is a Temperature Addon:
@@ -13,12 +13,12 @@
Connection Schemata:
--------------------
LM75 ------> Arduino Uno ----------> ESP8266
LM75 ------> ESP8266
==============================================
Vcc ---------> 5V -------------------> Vu (5V)
GND ---------> GND ------------------> GND
SCL ---------> Pin A5 ---------------> D1
SDA ---------> Pin A4 ---------------> D2
Vcc ---------> Vu (5V)
GND ---------> GND
SCL ---------> D1
SDA ---------> D2
This file is part of OpenMQTTGateway.
main/ZsensorMQ2.ino
+7 -7
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the MQ2 GAS Sensor Addon based on modules with a MQ:
@@ -11,12 +11,12 @@
Connection Scheme:
--------------------
MQ-2 -------> Arduino Uno ----------> ESP8266
MQ-2 -------> ESP8266
==============================================
Vcc ---------> 3.3V or 5V------------> 3.3V or 5V
GND ---------> GND ------------------> GND
A0 ----------> Pin A0 ---------------> A0
D0 ----------> Pin D4 ---------------> D4
Vcc ---------> 3.3V or 5V
GND ---------> GND
A0 ----------> A0
D0 ----------> D4
This file is part of OpenMQTTGateway.
main/ZsensorRN8209.ino
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266, ESP32 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
RN8209 reading Addon
main/ZsensorTEMT6000.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Light Meter Addon based on modules with a TEMT6000:
main/ZsensorTSL2561.ino
+8 -8
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Light Meter Addon based on modules with a TSL2561:
@@ -12,13 +12,13 @@
Connection Scheme:
--------------------
TSL2561------> Arduino Uno ----------> ESP8266
TSL2561------> ESP8266
==============================================
Vcc ---------> 3.3V -----------------> 3.3V
GND ---------> GND ------------------> GND
SCL ---------> Pin A5 ---------------> D1
SDA ---------> Pin A4 ---------------> D2
ADD ---------> N/C (Not Connected) --> N/C (Not Connected)
Vcc ---------> 3.3V
GND ---------> GND
SCL ---------> D1
SDA ---------> D2
ADD ---------> N/C (Not Connected)
Copyright: (c) Chris Broekema
main/ZsensorTouch.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
For esp32, touch sensor reading add-on.
main/ZwebUI.ino
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
Copyright: (c)Florian ROBERT
main/config_2G.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This gateway enables to set your parameters for the 2G gateway
main/config_ADC.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the ADC value
main/config_AHTx0.h
+8 -8
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Climate Addon:
@@ -13,12 +13,12 @@
Connection Schemata:
--------------------
AHT10 ------> Arduino Uno ----------> ESP8266
==============================================
Vcc ---------> 5V -------------------> 3v3 (3V)
GND ---------> GND ------------------> GND
SCL ---------> Pin A5 ---------------> D1
SDA ---------> Pin A4 ---------------> D2
AHT10 ------> ESP8266
=======================
Vcc ---------> 3v3 (3V)
GND ---------> GND
SCL ---------> D1
SDA ---------> D2
This file is part of OpenMQTTGateway.
main/config_BH1750.h
+9 -9
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the BH1750 sensor
@@ -26,13 +26,13 @@
Connection Schemata:
--------------------
BH1750 ------> Arduino Uno ----------> ESP8266
==============================================
Vcc ---------> 5V -------------------> Vu (5V)
GND ---------> GND ------------------> GND
SCL ---------> Pin A5 ---------------> D1
SDA ---------> Pin A4 ---------------> D2
ADD ---------> N/C (Not Connected) --> N/C (Not Connected)
BH1750 ------> ESP8266
==================================
Vcc ---------> (5V)
GND ---------> GND
SCL ---------> D1
SDA ---------> D2
ADD ---------> N/C (Not Connected)
*/
#ifndef config_BH1750_h
main/config_BME280.h
+8 -8
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables you to set parameters for the BME280 or BMP280 sensors.
@@ -26,12 +26,12 @@
Connection Schemata:
--------------------
BME280/BMP280 ------> Arduino Uno ----------> ESP8266
=====================================================
Vcc ----------------> 5V/3.3V ----------> 5V/3.3V (5V or 3.3V depends on the BME280/BMP280 board variant)
GND ----------------> GND ----------> GND
SCL ----------------> Pin A5 ----------> D1
SDA ----------------> Pin A4 ----------> D2
BME280/BMP280 ------> ESP8266
==============================
Vcc ----------------> 5V/3.3V (5V or 3.3V depends on the BME280/BMP280 board variant)
GND ----------------> GND
SCL ----------------> D1
SDA ----------------> D2
*/
#ifndef config_BME280_h
main/config_BT.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the bluetooth low energy gateway (beacons detection)
main/config_C37_YL83_HMRD.h
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your RF/infrared IR signal and a MQTT broker
Send and receiving command by MQTT
main/config_DHT.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the DHT11/22 sensor
main/config_DS1820.h
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your RF/infrared IR signal and a MQTT broker
Send and receiving command by MQTT
main/config_FASTLED.h
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
This files enables you to set your parameters for the FASTLED actuator
main/config_GFSunInverter.h
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your GridFree SUN-2000G inverter and a MQTT broker.
Send inverter metrics by MQTT.
main/config_GPIOInput.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the GPIOInput sensor
main/config_GPIOKeyCode.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the GPIOKeyCode multi input
main/config_HCSR04.h
+8 -8
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the HCSR04 sensor
@@ -26,12 +26,12 @@
Connection Schemata:
--------------------
HC-SR04 ------> Arduino Uno ----------> ESP8266
==============================================
Vcc ---------> 5V -------------------> Vu (5V)
GND ---------> GND ------------------> GND
TRI ---------> Pin D6 ---------------> D6
ECH ---------> Pin D7 ---------------> D7
HC-SR04 ------> ESP8266
=======================
Vcc ---------> Vu (5V)
GND ---------> GND
TRI ---------> D6
ECH ---------> D7
*/
#ifndef config_HCSR04_h
main/config_HCSR501.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the HC SR-501 sensor
main/config_HTU21.h
+8 -8
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Climate Addon:
@@ -13,12 +13,12 @@
Connection Schemata:
--------------------
HTU21 ------> Arduino Uno ----------> ESP8266
==============================================
Vcc ---------> 5V -------------------> Vu (5V)
GND ---------> GND ------------------> GND
SCL ---------> Pin A5 ---------------> D1
SDA ---------> Pin A4 ---------------> D2
HTU21 ------> ESP8266
======================
Vcc ---------> Vu (5V)
GND ---------> GND
SCL ---------> D1
SDA ---------> D2
This file is part of OpenMQTTGateway.
main/config_INA226.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the INA226 sensor
main/config_IR.h
+1 -20
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the infrared gateway
@@ -159,17 +159,6 @@ extern void MQTTtoIR(char* topicOri, JsonObject& RFdata);
# define IR_COOLIX48
# define IR_HITACHI_AC264
# define IR_HITACHI_AC296
#elif __AVR_ATmega2560__
# define IR_COOLIX
# define IR_Whynter
# define IR_LG
# define IR_Sony
# define IR_DISH
# define IR_RC5
# define IR_Sharp
# define IR_SAMSUNG
# define IR_Raw
# define IR_PANASONIC
#else //IR supported protocols on arduino uncomment if you want to send with this protocol, NEC protocol is available per default
//#define IR_COOLIX
//#define IR_Whynter
@@ -195,10 +184,6 @@ extern void MQTTtoIR(char* topicOri, JsonObject& RFdata);
# define IR_RECEIVER_GPIO 2 //D4 /replace by 4 with sonoff rf bridge
# elif ESP32
# define IR_RECEIVER_GPIO 26
# elif __AVR_ATmega2560__
# define IR_RECEIVER_GPIO 2 // 2 = D2 on arduino mega
# else
# define IR_RECEIVER_GPIO 0 // 0 = D2 on arduino UNO
# endif
#endif
@@ -207,10 +192,6 @@ extern void MQTTtoIR(char* topicOri, JsonObject& RFdata);
# define IR_EMITTER_GPIO 16 //D0/ replace by 0 (D3) if you use IR LOLIN controller shield /replace by 5 with sonoff rf bridge
# elif ESP32
# define IR_EMITTER_GPIO 14
# elif __AVR_ATmega2560__
# define IR_EMITTER_GPIO 9
# else
# define IR_EMITTER_GPIO 9
# endif
#endif
main/config_LM75.h
+7 -7
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is a Temperature Addon:
@@ -13,12 +13,12 @@
Connection Schemata:
--------------------
LM75 ------> Arduino Uno ----------> ESP8266
==============================================
Vcc ---------> 5V -------------------> Vu (5V)
GND ---------> GND ------------------> GND
SCL ---------> Pin A5 ---------------> D1
SDA ---------> Pin A4 ---------------> D2
LM75 ------> ESP8266
======================
Vcc ---------> Vu (5V)
GND ---------> GND
SCL ---------> D1
SDA ---------> D2
This file is part of OpenMQTTGateway.
main/config_LORA.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the LORA gateway
main/config_M5.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to use M5Stick C board components (display)
main/config_MQ2.h
+8 -8
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the MQ2 GAS Sensor Addon based on modules with a MQ:
@@ -11,12 +11,12 @@
Connection Scheme:
--------------------
MQ-2 -------> Arduino Uno ----------> ESP8266
==============================================
Vcc ---------> 3.3V or 5V------------> 3.3V or 5V
GND ---------> GND ------------------> GND
A0 ----------> Pin A0 ---------------> A0
D0 ----------> Pin D4 ---------------> D4
MQ-2 -------> ESP8266
==========================
Vcc ---------> 3.3V or 5V
GND ---------> GND
A0 ----------> A0
D0 ----------> D4
This file is part of OpenMQTTGateway.
main/config_ONOFF.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the ON OFF actuator
main/config_PWM.h
+1 -1
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
This files enables you to set your parameters for the PWM actuator
main/config_RF.h
+2 -8
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the radiofrequency gateways (ZgatewayRF and ZgatewayRF2) with RCswitch and newremoteswitch library
@@ -223,10 +223,6 @@ RFConfig_s RFConfig;
# define RF_RECEIVER_GPIO 0 // D3 on nodemcu // put 4 with rf bridge direct mod
# elif ESP32
# define RF_RECEIVER_GPIO 27 // D27 on DOIT ESP32
# elif __AVR_ATmega2560__
# define RF_RECEIVER_GPIO 1 //1 = D3 on mega
# else
# define RF_RECEIVER_GPIO 1 //1 = D3 on arduino
# endif
#endif
@@ -235,8 +231,6 @@ RFConfig_s RFConfig;
# define RF_EMITTER_GPIO 3 // RX on nodemcu if it doesn't work with 3, try with 4 (D2) // put 5 with rf bridge direct mod
# elif ESP32
# define RF_EMITTER_GPIO 12 // D12 on DOIT ESP32
# elif __AVR_ATmega2560__
# define RF_EMITTER_GPIO 4
# else
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/boarddefs.h so as to free pin D3 for RF RECEIVER PIN
//RF PIN definition
main/config_RFM69.h
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the radiofrequency gateways (ZgatewayRF and ZgatewayRF2) with RCswitch and newremoteswitch library
main/config_RN8209.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the RN8209 sensor
main/config_RS232.h
+1 -17
View File
@@ -1,5 +1,5 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your RS232 device and a MQTT broker
Send and receiving command by MQTT
@@ -88,26 +88,18 @@ extern void MQTTtoRS232(char* topicOri, JsonObject& RS232data);
// ESP8266: (TX0 GPIO1, RX0 GPIO3)
// (TX0 GPIO15, RX0 GPIO13) with UART0 swap enabled
// ESP32: (TX0 by RS232_TX_GPIO, RX0 by RS232_RX_GPIO)
// ATmega2560: (TX0 pin1, RX0 pin0)
// Arduino Uno: (TX0 pin1, RX0 pin0)
//
// - 1: use HW UART1 (serial1)
// ESP8266: (TX1 GPIO2, RX none) only transmit available
// ESP32: (TX1 by RS232_TX_GPIO, RX1 by RS232_RX_GPIO)
// ATmega2560: (TX1 pin18, RX1 pin19)
// Arduino Uno: N/A
//
// - 2: use HW UART2 (serial2)
// ESP8266: N/A
// ESP32: (TX2 by RS232_TX_GPIO, RX2 by RS232_RX_GPIO)
// ATmega2560: (TX2 pin16, RX1 pin17)
// Arduino Uno: N/A
//
// - 3: use HW UART3 (serial3)
// ESP8266: N/A
// ESP32: N/A
// ATmega2560: (TX2 pin14, RX1 pin15)
// Arduino Uno: N/A
//
// defaults
# ifdef ESP32
@@ -129,10 +121,6 @@ extern void MQTTtoRS232(char* topicOri, JsonObject& RS232data);
# define RS232_RX_GPIO 4 //D2
# elif defined(ESP32)
# define RS232_RX_GPIO 26
# elif defined(__AVR_ATmega2560__) && !defined(RS232_UART)
# define RS232_RX_GPIO 2 // 2 = D2 on arduino mega
# else
# define RS232_RX_GPIO 0 // 0 = D2 on arduino UNO
# endif
#endif
@@ -142,10 +130,6 @@ extern void MQTTtoRS232(char* topicOri, JsonObject& RS232data);
# define RS232_TX_GPIO 2 //D4
# elif ESP32
# define RS232_TX_GPIO 14
# elif defined(__AVR_ATmega2560__) && !defined(RS232_UART)
# define RS232_TX_GPIO 9
# else
# define RS232_TX_GPIO 9
# endif
#endif
main/config_SHTC3.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the SHTC311/22 sensor
main/config_SRFB.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the radiofrequency gateway on sonoff rf bridge (ZgatewaySRFB)
main/config_SSD1306.h
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
Supported boards with displays
main/config_Somfy.h
+2 -2
View File
@@ -1,6 +1,6 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This actor enables to:
main/config_TEMT6000.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Light Meter Addon based on modules with a TEMT6000:
main/config_TSL2561.h
+9 -9
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files exposes light level measured by a TSL2651 module
@@ -27,13 +27,13 @@
Connection Schemata:
--------------------
TSL2561 ------> Arduino Uno ----------> ESP8266
==============================================
Vcc ---------> 3.3V -----------------> Vu (3.3V)
GND ---------> GND ------------------> GND
SCL ---------> Pin A5 ---------------> D1
SDA ---------> Pin A4 ---------------> D2
ADD ---------> N/C (Not Connected) --> N/C (Not Connected)
TSL2561 ------> ESP8266
===================================
Vcc ---------> Vu (3.3V)
GND ---------> GND
SCL ---------> D1
SDA ---------> D2
ADD ---------> N/C (Not Connected)
*/
#ifndef config_TSL2561_h
main/config_Touch.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the esp32's touch buttons
main/config_WeatherStation.h
+1 -5
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the DHT11/22 sensor
@@ -41,10 +41,6 @@ extern void ZgatewayWeatherStationtoMQTT();
# define RF_WS_RECEIVER_GPIO 0 // D3 on nodemcu // put 4 with rf bridge direct mod
# elif ESP32
# define RF_WS_RECEIVER_GPIO 27 // D27 on DOIT ESP32
# elif __AVR_ATmega2560__
# define RF_WS_RECEIVER_GPIO 1 //1 = D3 on mega
# else
# define RF_WS_RECEIVER_GPIO 1 //1 = D3 on arduino
# endif
#endif
main/config_WebContent.h
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the DHT11/22 sensor
main/config_WebUI.h
+2 -2
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Theengs OpenMQTTGateway - We Unite Sensors in One Open-Source Interface
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the DHT11/22 sensor
main/config_mqttDiscovery.h
+1 -1
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This files enables to set your parameter for the Home assistant mqtt Discovery
main/main.ino
+52 -81
View File
@@ -1,7 +1,7 @@
/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This program enables to:
@@ -43,33 +43,28 @@ struct ReceivedSignal {
SIGNAL_SIZE_UL_ULL value;
uint32_t time;
};
# if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
ReceivedSignal receivedSignal[] = {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}};
# else // boards with smaller memory
ReceivedSignal receivedSignal[] = {{0, 0}, {0, 0}, {0, 0}, {0, 0}};
# endif
# define struct_size (sizeof(receivedSignal) / sizeof(ReceivedSignal))
#endif
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
//Time used to wait for an interval before checking system measures
unsigned long timer_sys_measures = 0;
// Time used to wait before system checkings
unsigned long timer_sys_checks = 0;
# define ARDUINOJSON_USE_LONG_LONG 1
# define ARDUINOJSON_ENABLE_STD_STRING 1
#define ARDUINOJSON_USE_LONG_LONG 1
#define ARDUINOJSON_ENABLE_STD_STRING 1
# include <queue>
#include <queue>
int queueLength = 0;
unsigned long queueLengthSum = 0;
unsigned long blockedMessages = 0;
int maxQueueLength = 0;
# ifndef QueueSize
# define QueueSize 18
# endif
#ifndef QueueSize
# define QueueSize 18
#endif
/**
@@ -86,18 +81,15 @@ bool ready_to_sleep = false;
#include <string>
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
struct JsonBundle {
StaticJsonDocument<JSON_MSG_BUFFER> doc;
};
std::queue<JsonBundle> jsonQueue;
# ifdef ESP32
#ifdef ESP32
// Mutex to protect the queue
SemaphoreHandle_t xQueueMutex;
# endif
#endif
StaticJsonDocument<JSON_MSG_BUFFER> modulesBuffer;
@@ -440,7 +432,6 @@ void enqueueJsonObject(const StaticJsonDocument<JSON_MSG_BUFFER>& jsonDoc) {
Log.error(F("Empty JSON, skipping" CR));
return;
}
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
if (queueLength >= QueueSize) {
Log.warning(F("%d Doc(s) in queue, doc blocked" CR), queueLength);
blockedMessages++;
@@ -451,11 +442,6 @@ void enqueueJsonObject(const StaticJsonDocument<JSON_MSG_BUFFER>& jsonDoc) {
bundle.doc = jsonDoc;
jsonQueue.push(bundle);
Log.trace(F("Queue length: %d" CR), jsonQueue.size());
#else
// Pub to main core
JsonObject jsonObj = jsonDoc.to<JsonObject>();
pubMainCore(jsonObj); // Arduino UNO or other boards with small memory, we don't store and directly publish
#endif
}
#ifdef ESP32
@@ -483,8 +469,6 @@ bool handleJsonEnqueue(const StaticJsonDocument<JSON_MSG_BUFFER>& jsonDoc) {
return handleJsonEnqueue(jsonDoc, QueueSemaphoreTimeOutLoop);
}
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
/*
* Add the jsonObject id as a topic to the jsonObject origin
*
@@ -503,7 +487,7 @@ void buildTopicFromId(JsonObject& Jsondata, const char* origin) {
topic.erase(pos, 1);
pos = topic.find(":", pos);
}
# ifdef ZgatewayBT
#ifdef ZgatewayBT
if (BTConfig.pubBeaconUuidForTopic && !BTConfig.extDecoderEnable && Jsondata.containsKey("model_id") && Jsondata["model_id"].as<std::string>() == "IBEACON") {
if (Jsondata.containsKey("uuid")) {
topic = Jsondata["uuid"].as<std::string>();
@@ -514,7 +498,7 @@ void buildTopicFromId(JsonObject& Jsondata, const char* origin) {
if (BTConfig.extDecoderEnable && !Jsondata.containsKey("model"))
topic = BTConfig.extDecoderTopic.c_str();
# endif
#endif
std::string subjectStr(origin);
topic = subjectStr + "/" + topic;
@@ -540,9 +524,6 @@ void emptyQueue() {
pubMainCore(obj);
queueLengthSum++;
}
#else
void emptyQueue() {}
#endif
/**
* @brief Publish the payload on default MQTT topic.
@@ -1192,9 +1173,7 @@ void setup() {
delay(1500);
#if defined(ZgatewayRF) || defined(ZgatewayPilight) || defined(ZgatewayRTL_433) || defined(ZgatewayRF2) || defined(ZactuatorSomfy)
# ifndef ARDUINO_AVR_UNO
setupCommonRF();
# endif
#endif
#ifdef ZsensorBME280
setupZsensorBME280();
@@ -1351,11 +1330,9 @@ void setup() {
#endif
Log.trace(F("mqtt_max_packet_size: %d" CR), mqtt_max_packet_size);
#ifndef ARDUINO_AVR_UNO // Space issues with the UNO
char jsonChar[100];
serializeJson(modules, jsonChar, measureJson(modules) + 1);
Log.notice(F("OpenMQTTGateway modules: %s" CR), jsonChar);
#endif
Log.notice(F("************** Setup OpenMQTTGateway end **************" CR));
}
@@ -2105,47 +2082,45 @@ void loop() {
#endif
connectedOnce = true;
connected = true;
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
if (now > (timer_sys_measures + (TimeBetweenReadingSYS * 1000)) || !timer_sys_measures) {
timer_sys_measures = millis();
stateMeasures();
# ifdef ZgatewayBT
#ifdef ZgatewayBT
stateBTMeasures(false);
# endif
# ifdef ZactuatorONOFF
#endif
#ifdef ZactuatorONOFF
stateONOFFMeasures();
# endif
# ifdef ZdisplaySSD1306
#endif
#ifdef ZdisplaySSD1306
stateSSD1306Display();
# endif
# ifdef ZgatewayLORA
#endif
#ifdef ZgatewayLORA
stateLORAMeasures();
# endif
# if defined(ZgatewayRTL_433) || defined(ZgatewayPilight) || defined(ZgatewayRF) || defined(ZgatewayRF2) || defined(ZactuatorSomfy)
#endif
#if defined(ZgatewayRTL_433) || defined(ZgatewayPilight) || defined(ZgatewayRF) || defined(ZgatewayRF2) || defined(ZactuatorSomfy)
stateRFMeasures();
# endif
# if defined(ZwebUI) && defined(ESP32)
#endif
#if defined(ZwebUI) && defined(ESP32)
stateWebUIStatus();
# endif
#endif
}
if (now > (timer_sys_checks + (TimeBetweenCheckingSYS * 1000)) || !timer_sys_checks) {
# if defined(ESP8266) || defined(ESP32)
# if message_UTCtimestamp || message_unixtimestamp
#if defined(ESP8266) || defined(ESP32)
# if message_UTCtimestamp || message_unixtimestamp
syncNTP();
# endif
# endif
#endif
if (!timer_sys_checks) { // Update check at start up only
# if defined(ESP32) && defined(MQTT_HTTPS_FW_UPDATE)
#if defined(ESP32) && defined(MQTT_HTTPS_FW_UPDATE)
checkForUpdates();
# endif
# ifdef ZgatewayBT
#endif
#ifdef ZgatewayBT
BTProcessLock = !BTConfig.enabled; // Release BLE processes at start if enabled
# endif
#endif
}
timer_sys_checks = millis();
}
#endif
emptyQueue();
#ifdef ZsensorBME280
MeasureTempHumAndPressure(); //Addon to measure Temperature, Humidity, Pressure and Altitude with a Bosch BME280/BMP280
@@ -2400,55 +2375,54 @@ void eraseAndRestart() {
#endif
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
String stateMeasures() {
StaticJsonDocument<JSON_MSG_BUFFER> SYSdata;
SYSdata["uptime"] = uptime();
SYSdata["version"] = OMG_VERSION;
# ifdef RGB_INDICATORS
#ifdef RGB_INDICATORS
SYSdata["rgbb"] = SYSConfig.rgbbrightness;
# endif
# ifdef ZmqttDiscovery
#endif
#ifdef ZmqttDiscovery
SYSdata["disc"] = SYSConfig.discovery;
SYSdata["ohdisc"] = SYSConfig.ohdiscovery;
# endif
# if defined(ESP8266) || defined(ESP32)
#endif
#if defined(ESP8266) || defined(ESP32)
SYSdata["env"] = ENV_NAME;
uint32_t freeMem;
uint32_t minFreeMem;
freeMem = ESP.getFreeHeap();
# ifdef ZgatewayRTL_433
# ifdef ZgatewayRTL_433
// Some RTL_433 decoders have memory leak, this is a temporary workaround
if (freeMem < MinimumMemory) {
Log.error(F("Not enough memory %d, restarting" CR), freeMem);
ESPRestart(8);
}
# endif
# endif
SYSdata["freemem"] = freeMem;
SYSdata["mqttp"] = mqtt_port;
SYSdata["mqtts"] = mqtt_secure;
SYSdata["msgprc"] = queueLengthSum;
SYSdata["msgblck"] = blockedMessages;
SYSdata["maxq"] = maxQueueLength;
# ifdef ESP32
# ifdef ESP32
minFreeMem = ESP.getMinFreeHeap();
SYSdata["minmem"] = minFreeMem;
# ifndef NO_INT_TEMP_READING
# ifndef NO_INT_TEMP_READING
SYSdata["tempc"] = round2(intTemperatureRead());
# endif
SYSdata["freestck"] = uxTaskGetStackHighWaterMark(NULL);
# endif
SYSdata["freestck"] = uxTaskGetStackHighWaterMark(NULL);
# endif
SYSdata["eth"] = ethConnected;
if (ethConnected) {
# ifdef ESP32_ETHERNET
# ifdef ESP32_ETHERNET
SYSdata["mac"] = (char*)ETH.macAddress().c_str();
SYSdata["ip"] = ip2CharArray(ETH.localIP());
ETH.fullDuplex() ? SYSdata["fd"] = (bool)"true" : SYSdata["fd"] = (bool)"false";
SYSdata["linkspeed"] = (int)ETH.linkSpeed();
# endif
# endif
} else {
SYSdata["rssi"] = (long)WiFi.RSSI();
SYSdata["SSID"] = (char*)WiFi.SSID().c_str();
@@ -2457,19 +2431,19 @@ String stateMeasures() {
SYSdata["mac"] = (char*)WiFi.macAddress().c_str();
}
# endif
# ifdef ZgatewayBT
# ifdef ESP32
#endif
#ifdef ZgatewayBT
# ifdef ESP32
SYSdata["lowpowermode"] = (int)lowpowermode;
# endif
# endif
# ifdef ZboardM5STACK
#endif
#ifdef ZboardM5STACK
M5.Power.begin();
SYSdata["m5battlevel"] = (int8_t)M5.Power.getBatteryLevel();
SYSdata["m5ischarging"] = (bool)M5.Power.isCharging();
SYSdata["m5ischargefull"] = (bool)M5.Power.isChargeFull();
# endif
# if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5TOUGH)
#endif
#if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5TOUGH)
M5.Axp.EnableCoulombcounter();
SYSdata["m5batvoltage"] = (float)M5.Axp.GetBatVoltage();
SYSdata["m5batcurrent"] = (float)M5.Axp.GetBatCurrent();
@@ -2481,7 +2455,7 @@ String stateMeasures() {
SYSdata["m5batpower"] = (float)M5.Axp.GetBatPower();
SYSdata["m5batchargecurrent"] = (float)M5.Axp.GetBatChargeCurrent();
SYSdata["m5apsvoltage"] = (float)M5.Axp.GetAPSVoltage();
# endif
#endif
SYSdata["modules"] = modules;
SYSdata["origin"] = subjectSYStoMQTT;
@@ -2504,7 +2478,6 @@ String stateMeasures() {
serializeJson(SYSdata, output);
return output;
}
#endif
#if defined(ZgatewayRF) || defined(ZgatewayIR) || defined(ZgatewaySRFB) || defined(ZgatewayWeatherStation) || defined(ZgatewayRTL_433)
/**
@@ -3119,7 +3092,6 @@ void MQTTtoSYS(char* topicOri, JsonObject& SYSdata) { // json object decoding
}
#if valueAsATopic && !defined(ZgatewayPilight)
# if defined(ESP32) || defined(ESP8266) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
String toString(uint64_t input) {
String result = "";
uint8_t base = 10;
@@ -3137,12 +3109,11 @@ String toString(uint64_t input) {
return result;
}
# else
#else
String toString(uint32_t input) {
String result = String(input);
return result;
}
# endif
#endif