chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity

[BOARDS] Remove Arduino boards (#1929)

Browse Source
This commit is contained in:
Florian authored and GitHub committed 2024-04-10 15:48:05 -05:00
1 parent 30f8264878
commit 2065d57e11
98 files changed
+336 -571
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

docs/setitup/ir.md
-4
View File
@@ -13,15 +13,11 @@ The IR setup can work with bc547 and a 4x3 LED-Matrix.
## Pinout
|Board| Receiver Pin| Emitter Pin|
|-|:-:|:-:|
|Arduino UNO|D2|D9|
|ESP8266|D4|D0|
|ESP32|27/**26**|14|
Connect the Emitter and Receiver to a 5V supply source, and the ground of your supply source to the ground of your board.
## Arduino Hardware setup
![IR](../img/OpenMQTTgateway_Arduino_Addon_IR.png)
## ESP8266 Hardware setup
![IR](../img/OpenMQTTgateway_ESP8266_Addon_IR.png)
docs/setitup/rf.md
-4
View File
@@ -32,7 +32,6 @@ Heltec LORA V3 is not compatible with RTL_433 library as it is based on an SX126
### SRX STX Pinout
|Board| Receiver Pin| Emitter Pin|
|-|:-:|:-:|
|Arduino UNO|D3|D4|
|ESP8266|D2/**D3**/D1/D8|**RX**/D2|
|ESP32|**27**/26|12|
|RF BRIDGE|-|-|
@@ -65,9 +64,6 @@ With SRX882 some users reported that D3 is not working use D1 instead in this ca
![Addon_RF](../img/OpenMQTTgateway_ESP8266_Addon_RF.png)
## Arduino Hardware setup
![RF](../img/OpenMQTTgateway_Arduino_Addon_RF.png)
## SONOFF RF Bridge Hardware setup
Per default there is no need on modifying the RF Bridge hardware, unless you don't want to use the provided RF controller (EFM8BB1). Indeed if you want to extend the protocols supported by the bridge you can [bypass this controller](https://github.com/xoseperez/espurna/wiki/Hardware-Itead-Sonoff-RF-Bridge---Direct-Hack) and use the ESP8255 capacities to decode RF Signal.
The RF processing can be achieved after the modification by either RF, RF2 or Pilight gateways.
docs/setitup/rs232.md
-4
View File
@@ -10,15 +10,11 @@ Any module using a MAX232 chip will work. Don't pay extra to get all the signals
## Pinout
|Board| Receiver Pin| Emitter Pin|
|-|:-:|:-:|
|Arduino UNO|D2|D9|
|ESP8266|D2|D4|
|ESP32|27/**26**|14|
Connect VCC on the module to 5V of your board, and the ground on the module to the ground of your board. your Transmit pin goes to TX and your Receive pin goes to RX. This may seem backwards, but the module is labeled as where it will be connected on the RS232 side of the module.
## Arduino Hardware setup
![RS232](../img/OpenMQTTgateway_Arduino_Addon_RS232.png)
## ESP8266 Hardware setup
![RS232](../img/OpenMQTTgateway_ESP8266_Addon_RS232.png)