Automatically set mqtt buffer size (#637)

* Automatically set mqtt buffer size

Current versions of pubsubclient allows the buffer size to be set
dynamically: https://github.com/knolleary/pubsubclient/pull/282

We can take advantage of this to avoid having to modify one of the
dependencies and instead automatically up the buffer size when a
powerful board is detected.

docs/upload/arduino-ide.md

@@ -6,16 +6,6 @@
 * Download OpenMQTTGateway code (OpenMQTTGateway_sources.zip) from the [release page](https://github.com/1technophile/OpenMQTTGateway/releases) and unzip it
 * Download the libraries package corresponding to your board and module wished into the same page (example esp32-m5stick-c-ble-libraries.zip)
 * Unzip the libraries into your arduino libraries folder (example D:/Users/XXXX/Documents/Arduino/libraries)
-* If you are using an ESP, Mega or other powerfull board; Open the *PubSubClient* folder, open the file src/PubSubClient.h, replace 
-```C++
-#define MQTT_MAX_PACKET_SIZE 128
-```
-by
-```C++
-#define MQTT_MAX_PACKET_SIZE 1024
-```
-This modification will enable to send and receive by MQTT long json messages.
-
 * If necessary replace the spaces into each library folder by _: example rename “ESP32 BLE Arduino” folder to “ESP32_BLE_Arduino”
 * Open the file main.ino from OpenMQTTGateway/main folder with the arduino IDE
 * Change the settings and the desired gateways into user_config.h (uncomment the modules you want)

docs/upload/troubleshoot.md

@@ -46,10 +46,8 @@ Exception (2):
 → You are not using the last update of ESP8266 into board manager, go to your Arduino IDE and update it, should be at least 2.3.0
 
 ## You don't see the messages appearing on your broker but they appears on the serial monitor
-This is due to a too small mqtt packet size, open pubsubclient.h from pubsubclient library and set:
-try to modify in pubsubclient.h:
-`#define MQTT_MAX_PACKET_SIZE 1024`
-The other option is to use the [pubsubclient library](https://github.com/1technophile/OpenMQTTGateway/tree/master/lib/pubsubclient) provided in the OMG repository folder.
+This is due to a too small mqtt packet size, open User_config.h and set:
+`#define mqtt_max_packet_size 1024`
 
 ## Your Arduino with w5100 Ethernet shield does not connect to network until you press Reset button
 If you notice that your Arduino with w5100 Ethernet shield does not connect to network until you press its Reset button, but connects fine if you connect the Arduino with a USB cable to a computer/laptop with Arduino IDE running and open Serial Monitor, the problem is most likely the Ethernet shield and/or the power supply you're using.