make ON OFF actuator more flexible (#481)

* make ON OFF actuator more flexible

enable to choose the pin when sending the MQTT command

* add on off environment example

docs/use/actuators.md

@@ -3,13 +3,21 @@
 This module enables to actuate things by giving to a PIN a HIGH or LOW value corresponding to an MQTT topic.
 Example usage: Connect a transistor to power a relay, connect a led...
 
-So as to pilot the pin use the following commands:
+So as to pilot the pin use the following commands with [simple receiving](../upload/pio.md#api):
 
 OFF command:
-`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF -m OFF`
+`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF/setOFF -m 15`
 
 ON command
-`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF -m ON`
+`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF/setON -m 15`
+
+or with [json receiving](../upload/pio.md#api)
+
+OFF command:
+`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF -m '{"pin":15,"state":0}'`
+
+ON command
+`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF -m '{"pin":15,"state":1}'`
 
 ## FASTLED
 

main/ZactuatorONOFF.ino

@@ -4,7 +4,7 @@
    Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker 
    Send and receiving command by MQTT
  
-    Output pin High or Low
+    Output pin defined to High or Low
   
     Copyright: (c)Florian ROBERT
     
@@ -30,44 +30,49 @@
 
 #ifdef ZactuatorONOFF
 
-void setupONOFF(){
+#ifdef jsonReceiving
-  trc(F("ACTUATOR_ONOFF_PIN"));
+void MQTTtoONOFF(char * topicOri, JsonObject& ONOFFdata){
-  trc(ACTUATOR_ONOFF_PIN);
-  //init
-  pinMode(ACTUATOR_ONOFF_PIN, OUTPUT);
-  trc(F("Set to OFF"));
-  digitalWrite(ACTUATOR_ONOFF_PIN, LOW);
-  trc(F("ZactuatorONOFF setup done "));
-}
-
-  void MQTTtoONOFF(char * topicOri, char * datacallback){
-  
-    int boolSWITCHTYPE;
-    if (strcmp(datacallback, "ON") == 0) boolSWITCHTYPE = 1;
-    if (strcmp(datacallback, "OFF") == 0) boolSWITCHTYPE = 0; 
-
-   if (strcmp(topicOri,subjectMQTTtoONOFF) == 0){
-      trc(F("MQTTtoONOFF data analysis"));
-      trc(boolSWITCHTYPE);
-      digitalWrite(ACTUATOR_ONOFF_PIN, boolSWITCHTYPE);
-      // we acknowledge the sending by publishing the value to an acknowledgement topic
-      pub(subjectGTWONOFFtoMQTT, datacallback);
-    }
-  }
-  void MQTTtoONOFF(char * topicOri, JsonObject& ONOFFdata){
   
   if (strcmp(topicOri,subjectMQTTtoONOFF) == 0){
     trc(F("MQTTtoONOFF json data analysis"));
-      int boolSWITCHTYPE = ONOFFdata["switchType"] | 99;
+    int boolSWITCHTYPE = ONOFFdata["state"] | 99;
+    int pin = ONOFFdata["pin"] | ACTUATOR_ONOFF_PIN;
     if (boolSWITCHTYPE != 99) {
       trc(F("MQTTtoONOFF boolSWITCHTYPE ok"));
       trc(boolSWITCHTYPE);
-        digitalWrite(ACTUATOR_ONOFF_PIN, boolSWITCHTYPE);
+      trc(F("pin number"));
+      trc(pin);
+      pinMode(pin, OUTPUT);
+      digitalWrite(pin, boolSWITCHTYPE);
       // we acknowledge the sending by publishing the value to an acknowledgement topic
       pub(subjectGTWONOFFtoMQTT, ONOFFdata);
     }else{
       trc(F("MQTTtoONOFF failed json read"));
     }
   }
+}
+#endif
+
+#ifdef simpleReceiving
+void MQTTtoONOFF(char * topicOri, char * datacallback) {
+  if ((strstr(topicOri,subjectMQTTtoONOFF) != NULL) ){
+
+    trc(F("MQTTtoONOFF"));
+    int pin = strtol(datacallback, NULL, 10); // we will not be able to pass values > 4294967295
+    trc(F("pin number"));
+    trc(pin);
+    pinMode(pin, OUTPUT);
+
+    bool ON = false;
+    if (strstr(topicOri,ONKey) != NULL) ON = true;
+    if (strstr(topicOri,OFFKey) != NULL) ON = false;
+
+    digitalWrite(pin, ON);
+    // we acknowledge the sending by publishing the value to an acknowledgement topic
+    pub(subjectGTWONOFFtoMQTT, ON);
   } 
+}
+#endif
+
+
 #endif

main/config_ONOFF.h

@@ -34,7 +34,11 @@ extern void MQTTtoONOFF(char * topicOri, JsonObject& RFdata);
 #define subjectMQTTtoONOFF  Base_Topic Gateway_Name "/commands/MQTTtoONOFF"
 #define subjectGTWONOFFtoMQTT  Base_Topic Gateway_Name "/ONOFFtoMQTT"
 
+#define ONKey "setON"
+#define OFFKey "setOFF"
+
 /*-------------------PIN DEFINITIONS----------------------*/
+// default pin, if not set into the MQTT json
 #ifndef ACTUATOR_ONOFF_PIN
     #ifdef ESP8266
             #define ACTUATOR_ONOFF_PIN 15 //12 for sonoff basic relay

main/main.ino

@@ -579,9 +579,6 @@ void setup()
   #ifdef ZsensorTSL2561
     setupZsensorTSL2561();
   #endif
-  #ifdef ZactuatorONOFF
-    setupONOFF();
-  #endif
   #ifdef Zgateway2G
     setup2G();
   #endif

prod_env.ini.example

@@ -2,6 +2,7 @@
 default_envs = 
   esp32dev-ble-1
   esp32dev-ble-2
+  env:nodemcuv2-ONOFFPILIGHT
 
 ;esp32 1
 [env:esp32dev-ble-1]
@@ -41,3 +42,18 @@ upload_flags =
   --auth=OTAPASSWORD
 upload_speed = 512000
 monitor_speed = 115200
+
+[env:nodemcuv2-ONOFFPILIGHT]
+platform = ${com.esp8266_platform}
+board = nodemcuv2
+lib_deps =
+  ${com-esp.lib_deps}
+  ${libraries.esppilight}
+  ${libraries.esp8266_mdns}
+  ${libraries.wire}
+build_flags = 
+  ${com-esp.build_flags}
+  '-DZgatewayPilight="Pilight"'
+  '-DZactuatorONOFF="ONOFF"'
+  '-DGateway_Name="OpenMQTTGateway_ESP8266_ONOFFRF"'
+board_build.flash_mode = dout